Best Single Phase Relay

Youngneer 5v Relay Board Raspberry Arduino Relay Module 1 Channel Opto-Isolated High or Low Level Trigger

  • 【1 Channel Relay Module】- This Relay Board provides a single relay that can be controlled by any 5V digital output from your microcontroller..
  • 【Main Specification】- Peak Load of NO Connector: AC125~250V/10A, DC28~30V/10A.
  • 【Adopted SMD Optocoupler Isolation】- The isolation circuit prevent damages to I / O port by relay switch current..
  • 【Wide Application】- These 5v relay board works well with Arduino/ ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4 etc..
  • 【Humanization Design On Interfaces】- All interfaces can be directly wired out through the terminals..
Check Stock

Control Box, 1 1/2HP, 230V, 1Phase

  • Price For: Each Includes: - Standards: - Enclosure Type: 3R Thermal Unit Code: - For Use With: - Control Relay: - Item: Motor and Pump Control Box Phase: 1 Mounting: Pole or Wall Type: Submersible Motor/Pump HP: 1-1/2 Voltage: 230 Amps: 11.5 Height (In.): 9-5/16 Width (In.): 8 Depth (In.): 5-13/16 Control Box Type: CSCR.
  • Accepts: Up to #2 AWG Wire Country of Origin (subject to change): United States.
Check Stock

CR Magnetics CR6231-500-50 AC Power Transducer with 3-Phase and 3-Wire Reactive Power, 20 - 5 KHz, 003e=2K Output Load, 12 VDC, 0-500 VAC 0-50 AAC Input Range, 0 - 5 VDC Output Range

  • 0 - 5 VDC outputs, connection diagram printed on case.
  • Electrical isolation between circuits, output relay rated up to 20 Amps.
  • LED trip status indicator, dead band prevents relay chatter.
  • Calibrated dial option available, external current transformers available.
  • Applications: monitor electrical heater elements, sense motor over/under loads, detect lamp burn-out, indicate phase loss.
  • Variable trip point and time delay, monitors currents from 10 mA to 60 AC amps.
Check Stock

ATO 3 hp 2.2kW 10A VFD, Single Phase 120V Input, 1phase/3phase 220V Output Variable Frequency Drive Motor Control

  • ATO 3 hp (2.2 kW) VFD, single phase 110v/120v input, single phase or three phase 220v output variable frequency drive, specially designed for 120v power supply.
  • 【voltage&frequency】Input voltage : 1 phase 120V AC ±15%.
  • Output voltage: 1 phase or 3 phase 220V AC ±15%.
  • 【APPLICATION】: ATO 110V VFD Can be widely applied to drive the AC motor, such as fans, pumps, power tools, etc..
  • 【TIPS】: Choose a VFD base on motor rated current: VFD output current ≥ motor rated current.
  • 【CUSTOMER FIRST】: If you have no experience in driving a VFD, be sure to refer to the instructions before operating a VFD.If you are not sure about the size or have any issue about the product or service, please don't hesitate to email us. We will answer you within 12h.
Check Stock

3v Relay Board Raspberry Pi Arduino Relay Module 1 Channel Opto-Isolate High Level Trigger for IOT ESP8266 Microcontrollers Development Board

  • 【1 Channel Relay Module】- This Relay Board provides a single relay that can be controlled by any 3V/3.3V digital input from your microcontroller IO..
  • 【Main Specification】- The 3v Relay 1 Channel power switch module compatible with 10A 250VAC and 10A 30VDC load.4pcs * 2.5 mm Fixed Bolt Hole..
  • 【Adopted Optocoupler Isolation】- 3V/3.3V power relay module supports photocoupler isolation control and dual power supply input ensure high anti-interference ability. Fast response time less than 20ms and long life time up to 100,000 times snap action with diode freewheel protection..
  • 【Jumper Caps】You can select whether the relay and the signal use the same power supply or not by removing the jumper caps on the pins. And It is better to share the same power supply, because that is more convenient for using..
  • 【Wide Application】- These 3v relay board works well with Arduino/ ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4/3.3V /NodeMCU/IOT/ ESP8266 module etc..
Check Stock

Grizzly Industrial G9743-7" x 12" 1-1/2 HP Gearhead Metal-Cutting Bandsaw

  • Motor: 1-1/4 HP, 220V, 3-phase, 1725 RPM, 4.8 Amps with single-phase inverter.
  • Required power source: 220V, single-phase, 60Hz.
Check Stock

Fielect Single Phase Diode Module Bridge Rectifier 60A 1200V for MDQ-60A Model 1Pcs

  • This Bridge Rectifier Warranty 1 years . If there are quality problems within 8 years, you can send us email. We will send you new ones ..
  • Model: MDQ-100A is designed for single phase Full wave rectification, which has four diodes connected in a one phase bridge configuration..
  • Max. Average Forward Rectified Current : 100A.
  • Production Size: 80 x 40 x 32mm/ 3.1" x 1.6" x 1.2" (L*W*T).
Check Stock

Veris,Current Switch and SPST Relay,N.O H735

  • The Hawkeye Relay Combination Series is the ideal solution for the automation installer..
  • These units combine a current switch and relay into a single package, reducing the space required for total control of fans and pumps..
  • The current switch and relay operate independently of one another..
  • These devices allow start/stop control and status monitoring with one device instead of two..
Check Stock

Nema34 8N.m Closed Loop Stepper Servo Motor 116mm 6A 2 Phase+HSS86 Hybrid Servo Motor Driver Controller 70V/AC 100V/DC CNC Kit for CNC Router Engraving Milling Machine

  • ATO 2 hp (1.5 kW) VFD, single phase 110V/120V input, 1 phase or 3 phase 220v-240v output, designed for driving single/three phase AC motor via 120v power supply.
  • 【Voltage&Frequency】Input voltage: 1 phase 120V AC ±15%.
  • Output voltage: 1 phase or 3 phase 220V AC ±15%.
  • 【APPLICATION】 ATO 110V VFD Can be widely applied to drive the AC motor, such as fans, pumps, power tools, etc..
  • 【TIPS】 Choose a VFD base on motor rated current: VFD output current ≥ motor rated current.
  • 【CUSTOMER FIRST】 If you have no experience in driving a VFD, be sure to refer to the instructions before operating a VFD.If you are not sure about the size or have any issue about the product or service, please don't hesitate to email us. We will answer you within 12h.
Check Stock

Delay Timer Switch,GRT8-B1 AC/DC 12V~240V Mini Power Off Delay Time Relay DIN Rail Type

  • This is a single function power-off delay relay and time delay can be set by panel knob..
  • Super wide time delay range of 0.1s - 10days..
  • With super small volume, this relay can be mounted on 35mm DIN rail..
  • Multifunction time relay with AC/DC 12V-240V working voltage..
  • Relay working status is indicated by LED indicators..
Check Stock