Best Single flute End Mills

uxcell 5PCS 1/8" Shank 1.5mm x 12mm Carbide End Mill CNC Router Bits 2 Flute Milling Bit for Acrylic PVC MDF Wood

  • 1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8".
  • Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines..
  • Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground..
  • Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use.
  • Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life..
Check Stock

Fdit HSS CNC Lathe Straight Shank 4 Flute End Mill Cutter Drill Bit Tool 12mm

  • Single flute design for applications in plastics and composites.
  • Left hand spiral routers drive chips downward, preventing delamination in multi-layered workpieces.
  • Polished flute improves chip evacuation by reducing.
  • Optimized geometry for increased material removal rates.
Check Stock

Micro 100 SFA-125-44 Square End Mill - Upcut, 1/8\ Cutter Dia, 1/2\ LOC, 1 Fl, 1/4\ Shank Dia, 2\ OAL, Uncoated

  • Single flute design for applications in plastics.
  • Optimized geometry for increased material removal rates.
Check Stock

OSCARBIDE Carbide Inserts APKT1604 TiAlN Coated Indexable Milling Inserts APKT Style,10 Piece/Box

  • APKT 1604 carbide turning inserts,85 degrees parallelogram,Relief Angle 11 degrees,nose radius 1/32"..
  • Made of Tungsten Carbide,TiAlN Coated ,the cutting speed are 4-7 time faster than generic steel,and Sharpened on a diamond wheel to make it longer tool life, providing you a better experience and durable use and Better cut.
  • Designed for cast iron and non-ferrous materials,good for both finishing and roughing.
  • Used for indexable face mill and end mill,Performing square milling and side milling,ramping milling, helical milling, slotting milling, plunging milling..
  • These Insert fit for our Carbide Indexable End Mills and other same size indexable end mills, please search B07SG8JKDS or B099WPXW29 to buy this indexable end mills.
Check Stock

Micro 100 SFA-187-45 Square End Mill - Upcut, 3/16\ Cutter Dia, 5/8\ LOC, 1 Fl, 1/4\ Shank Dia, 2\ OAL, Uncoated

  • Single flute design for applications in aluminum and non-ferrous materials.
  • Polished flute improves chip evacuation and helps to reduce built up edge.
  • Optimized geometry for increased material removal rates.
Check Stock

Micro 100 SFL-250-410 Square End Mill - Downcut, 1/4\ Cutter Dia, 1-1/4\ LOC, 1 Fl, 1/4\ Shank Dia, 3\ OAL, Uncoated

  • Single flute design for applications in aluminum and non-ferrous materials.
  • Polished flute improves chip evacuation and helps to reduce built up edge.
  • Optimized geometry for increased material removal rates.
Check Stock

LittleMachineShop.com #3 Morse Taper End Mill Holder Set, 5 Piece (1636)

  • Set of five 3 Morse taper end mill holders.
  • Compatible with Mills with 3 Morse Taper Spindle.
Check Stock

LittleMachineShop.com R8 End Mill Holder Set, 5 Piece (1258)

  • Set of five R8 end mill holders from 3/16" to 3/4".
Check Stock

Micro 100 SFA-125-24 Square End Mill - Upcut, 1/8\ Cutter Dia, 1/2\ LOC, 1 Fl, 1/8\ Shank Dia, 1-1/2\ OAL, Uncoated

  • Single flute design for applications in aluminum and non-ferrous materials.
  • Polished flute improves chip evacuation and helps to reduce built up edge.
  • Optimized geometry for increased material removal rates.
Check Stock

Micro 100 SFA-250-43 Square End Mill - Upcut, 1/4\ Cutter Dia, 3/8\ LOC, 1 Fl, 1/4\ Shank Dia, 2-1/2\ OAL, Uncoated

  • Single flute design for applications in aluminum and non-ferrous materials.
  • Polished flute improves chip evacuation and helps to reduce built up edge.
  • Optimized geometry for increased material removal rates.
Check Stock