Best Single phase Transformer For Electric

Taidda Passive Double Balanced Mixer, Frequency Transducers Conversion Module Hmc213 Passive DoubleBalanced Mixer Diode Frequency Transducers Conversion Module

It can be used as up-converter, down-converter, two-phase modulator and demodulator or phase comparator.
Passive mixers use GaAs Schottky diodes and novel planar transformer on-chip balun structures.
Passive double-balanced mixer, 8-pin surface-mount plastic package (MsOP).
The passive mixers adopt mini components design,compact and light weight.
The mixer has the advantage of high isolation.

Data logging of single and 3-phase/3-wire or 3-phase/4-wire systems (up to 52,428 single phase readings or 17,476 3-phase readings).
Flexible clamp probes can be used for wrapping around bus bars and wire bundles.
Large backlighting LCD displays up to 35 parameters in one screen.
Clamp-on True RMS power measurements with on-screen Harmonics display.
Simultaneous display of Harmonics and Waveform.

ELECTRIC METER – State-of-the-art, fully solid-state kWh meter with 800 pulse per kWh pulse output..
SINGLE PHASE – Up to 100 amps, 120/240-volt, 3-wire, 60Hz..
ACCURATE – 1% accuracy class, LCD readout in hundredths of a kWh, to 99999.99 kWh..
COMPACT – Simple DIN-rail mounting designed for symmetrical load..
LCD DISPLAY – Non-resettable LCD display. Usage data is maintained through power outages..

SUPERIOR SOUND. High-current EI transformer makes sure that sound quality doesn't suffer. Large custom audio capacitors and a discrete output stage..
AMP TECHNOLOGY. Wide Range Amplification Technology delivers high-current power stability via large custom capacitors, while low-NFB amps capture depth and spatiality for a wide frequency spectrum with low distortion..
AUTHENTIC AUDIO. Direct Mode bypasses tone and PM Bass circuitries. In combination with a refined amp circuit design, signal-pathlengths have been significantly reduced in comparison to the A-9010 for even more accurate and faithful sound..
BASS BOOST. Phase Matching Bass Boost eliminates phase-shift between low- and mid-range frequency bands. Bass response is enhanced without compromising vocal clarity, which is especially useful when playing music at low volumes..
FEATURES. 50 W + 50 W (4 ohms, 20 hz–20 kHz, 0.9% THD, 2-ch Driven, FTC). Remote controller..

☞ Model: MDQ-100A is designed for single phase Full wave rectification, which has four diodes connected in a one phase bridge configuration..
☞ Max. Average Forward Rectified Current : 100A.
Production Size: 80 x 40 x 32mm/ 3.1" x 1.6" x 1.2" (L*W*T).
package content: 1 x rectifier bridge 1 net weight: 130g.
package content: 1 x rectifier bridge radiator.
☞ Applications: DC power supply for instrument equipment , Input of PWM frequence converter rectifying power supply , Excitation power supply for DC motor, Input of switch power supply and auxiliary current Inverter current..

➽ What it is:Cenipar Doorbell Transformer 16V 30VA,16v-30 vac transformer for ring doorbell pro.The best alternative to 16v/10va transformers for driving ringers with insufficient power. Low-voltage power supply suitable for residential, commercial and industrial use..
➽ Where to use:You want to keep the ring doorbell "hardwired." Or if you find that the doorbell is humming or humming, it is most likely because the transformer requires more power. Is the only way to achieve it. Get this ring transformer pro and finish!.
➽ Model:30va chime transformer,power supply for single or multiple doorbells, compatible with 16 vac bell,Ring Doorbell Pro, Nest Hello Doorbell, ZmodoWiFi doorbell, SkyBell, Ring Doorbell,Ring Doorbell 2,Nest doorbell,etc..
➽ What does it include：1 X Doorbell Transformer (16V 30VA)..
➽ Why choose us:We will stictly carry out the quality-control project,which will enable our customers to buy with confidence and use with satisfaction..

Cross-phase multi-element design provides enhanced reception technology for more channels.
Receives UHF and VHF channels = more content!.
Pre-assembled design with easy-lock fold-out UHF reflector and snap-lock elements.
Mast mounting hardware and 75-ohm transformer included for placement indoors or outdoors.

ATO 1 hp 110v VFD, 0.75 kW single phase 110v/120v input, single phase or three phase 220v output variable frequency drive. Running your 1 phase/3 phase motors on 120 volt supply via ATO VFD.
Input voltage: 1 phase 120V AC ±15%, Input frequency: 50Hz/60Hz, Output voltage: 1 phase or 3 phase 220V AC ±15%, Output frequency: 0.00~400.00Hz.
【APPLICATION】: ATO 110V Variable frequency drive can be widely applied to drive the AC motor, such as fans, pumps, power tools, etc..
【TIPS】: Choose a VFD base on motor rated current: VFD output current ≥ motor rated current.
【CUSTOMER FIRST】If you are not sure about the size or have any issue about the product or service, please don't hesitate to email us. We will answer you within 12h.

✅Technical Parameters: Spec: Φ3.13-9.4inin (Diameter: 5.4cm x Length: 23.9cm).
✅Air Cooled Spindle: High-speed electric main bearings used in all C class high-speed angular contact ball bearings, axial pre-load feature,....
✅Package include: Square Spindle Motor, Inverter, ER11 Collet.
Drill Bits, electric wire. Our air cooled spindle is widely engrave for wood,....
✅Support: We offer 1 year warranty. If you get stuck, contact us with any questions that arise, our customer service team are waiting for helping....