Yukon (BK F9.75-D) Bearing Installation Kit for Ford 9.75\ Differential
Yukon Bearing installation kits are perfect for shops and builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit.
This kit uses Timken bearings and races along with all high quality small parts.
Kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush.
Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring and pinion set.
Design: Directional Twin Hybrid Rocker - This high-end all-mountain directional twin is far superior to some one-trick pony freestyle snowboard..
Specialty: Park/Groomers/Pow - This high-end all-mountain Directional Twin Hybrid Rocker stick is designed to do everything..
Quadratic Sidecut - Blending of three radii to improve turn initiation/exit while providing the best grip possible. This design is uniquely formulated for each model based on its shape and riding style..
Sintered, Stone Ground Base - High-end sintered 4000 Ptex base material that is more durable, harder and faster than extruded..
Performance Core - High strength Aspen is combined with Bamboo and lightweight Paulownia wood to provide the perfect balance of strong and light..
USA Standard Gear (ZBKD44-JK-RUB) Bearing Kit for Jeep JK Rubicon Dana 44 Rear Differential
this kit uses koyo bearings and races along with all high quality small parts.
kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush.
usa standard gear does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring and pinion set.
Design: Tapered Directional Hybrid Camber - The Splitpig Will Allow You To Access More Off-Piste Locations In The Mountains..
Specialty: Groomers/Pow - The Splitpig Is The Warpig Shape That Breaks In Half So You Can Walk Up Mountains And Thrash Every Feature On The Way Down..
Tapered Bi-Radial Sidecut - A Twin Sidecut Which Allows For The Underfoot Width Of A Wide Board In The Tip/Tail Width Of A Standard Size. This Design Provides Improved Leverage On Landings, Grip Through Turns, And Stability On Flat Base..
Sintered, Stone Ground Race Base - The Highest Grade Carbon-Infused Sintered Base Material Available. Designed For Speed..
Split Performance Core - A mixture of Bamboo, Paulownia and Aspen to create a lightweight and responsive core with RIDE’s exclusive SlimeWall technology running through the core..
Features the highest friction HH rating for maximum stopping power, made in the USA from sintered copper alloy like original pads for longer life and perfect braking.
Stainless steel radiator plates are fitted to reduce heat transfer into bikes hydraulics where required.
The unique double segment vented design improves braking under all riding conditions, keeping the pads cooler and preventing pad drag and overheat or fade.
EBC removed the iron powders commonly used in many sintered pads that cause the pad to weld to the disc under corrosion when the bike is parked and replaced it with stainless powder.
Uses EBCs SB101C friction material which completely eliminates brake noise, improves the pads heat cycling capability and improves feel at the lever.
...x with #2216 4-Channel Receiver. Battery: 7-Cell Hump 3000mAh NiMH with Traxxas High-Current Connector and iD Auto Battery Identification that Allows Traxxas iD Equipped Charg.
Includes: (1) Stampede Chassis with Oil-Filled Shocks (1) 550 Motor (1) XL-5 ESC (1) Body (4) Tires (4) Foam Inserts (4) Wheels (1) 19 Tooth Pinion Gear (1) 23 Tooth Pinion Gears (1) 86 Tooth Spur Gear (1) TQ 2.4GHz Radio with Waterproof Electronics (1) 7-Cell Hump NiMH 3000 mAh Battery (1) 4A DC Car Charger Illustrated Instruction Manual.
Specs: Length: 16.25" (413mm) Width: 13" (330mm) Height: 9.5" (241mm) Weight: 2.98lbs (1355g) Approx. Wheelbase: 10.75" (273mm) Front and Rear Tread: 10.5" (266mm) Side-to-Side at Wheel Centers Front and Rear Track: 12.75" (324mm) Side-to-Side at Wheel Edges Ground Clearance: 2.4" (60mm) Gear Ratio: 4.5:1 with Stock 19T Pinion Gear 3.7:1 with Optional 23T Pinion Gear.
Part number(s) included (in factory packaging): 36054-1.
Yukon Master Overhaul kits give you all the high quality parts you need to start and finish every differential job.
Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs.
This kit uses Timken bearings and races along with high quality seals and small parts.
Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, c-clip, crush sleeve,.
Yukon's Master Overhaul kits are the most comprehensive and complete kits on the market.
A1 Core - Sustainably harvested bamboo, aspen, and paulownia combine to deliver a snappy and responsive feel. Our A1 and S1 cores are backed by a 5-year warranty against breakage..
ICG 10 Triax Carbon Glass - Integrating Carbon Fiber stringers that run the length of the board into our fiberglass increases the snap of the snowboard without adding unnecessary rigidity..
Hybritech Sidewall Construction - A K2 exclusive. By transitioning from a P-Tex sidewall into a capped construction in the tip and tail of our snowboards, we can reduce waste while giving our snowboards better energy transfer and making them more durable than our competitors..
Sintered 4000 Base - Hard, fast, and durable, our Sintered Base material holds wax better than extruded materials increasing speed and glide..
Built for the intermediate-to-expert level rider and shaped and sized to be unisex, the Passport is directional in every way but remains switch and fakie friendly..
Yukon Gear & Axle (AK SET10) Replacement Axle Bearing & Seal Kit for Dana 44/Dana 20
Yukon Master Overhaul kits give you all the high quality parts you need to start and finish every differential job.
Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs.
This kit uses Timken bearings and races along with high quality seals and small parts.
Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, oil baffles and slingers, Thread locking compound, marking compound with brush, and gasket.
Yukon's Master Overhaul kits are the most comprehensive and complete kits on the market.
