Neewer 47.2 inches/120 Centimeters Carbon Fiber Camera Track Slider Video Stabilizer Rail with 6 Bearings for DSLR Camera DV Video Camcorder Film Photography, Load up to 17.5 pounds/8 kilograms
6 U-shaped Ball Bearings: U-shaped ball bearings under the slider part to ensure both smooth motion and minimum abrasion on carbon fiber tubes.
Flexible Uses: The track can be used on the ground or worked with tripod. It can be directly connected with camera, or indirectly connected with camera via ball head.
Multi-Angle Shooting: Available for vertical, horizontal and 45 degrees shooting by using the threaded holes in the slider.
Adjustable and Secured Legs: Height of legs could be adjusted from 8.5 centimeters to 10 centimeters.
Gear-shaped joint interface and locking knobs for better position locking for the legs.
Convenient Carrying Bag: Easy and carry, transport and store.
EXMAX 26cm/10.2in 2 Way Macro Shot Focusing Focus Rail Slider 1/4 Quick Screw Release Mount Camera Flash Support Plate with Standard 1/4 Screw
The rail adopts durable metal slider, and a geared drive system which enhances accuracy and speed of adjustment of the rail greatly.This rail with a....
This 2 way macro rail positioning adopts adjustable locking knob to assure rock-steady focus,a small knob to lock/unlock the current position, and a....
Macro focusing rail slider is essential accessories for macro photography,it helps macro photographers to position camera and focus on subject with....
1/4" male thread screw compatible with most DSLR or DC.
1/4" female thread screw can be attached to tripod head or other compatible devices..
If you purchase two piece macro focusing rail sliders, they can be combined into a 4-direction macro slider. And it can also be divided into two....
Neewer Camera Slider Carbon Fiber Dolly Rail, 19.7''/50cm with 4 Bearings, Compatible with 13 13 Pro 13 Pro Max 13 Mini & Android Cell Phones and Mirrorless Cameras, Load up to 2.2lbs/1kg
6 U-shaped Ball Bearings: U-shaped ball bearings under the slider part to ensure both smooth motion and minimum abrasion on high-grade carbon fiber tubes.
Flexible Uses: The track can be used on the ground or worked with tripod. It can be directly connected with camera, or indirectly connected with camera via ball head.
Multi-Angle Shooting: Available for vertical, horizontal and 45 degrees shooting by using the threaded holes in the slider.
Adjustable and Secured Legs: Height of legs could be adjusted from 8.5 centimeters to 10 centimeters.
Gear-shaped joint interface and locking knobs for better position locking for the legs.
Convenient Carrying Bag: Easy and carry, transport and store.
Neewer Camera Slider Support Arm Stabilizer, 2-Pack Adjustable Tripod Stability Arm for Increasing Stability in Aluminum Alloy, Extendable Poles for Camera Video Slider Rail with C Clamps and BallHead
003cp003e【Increased Stability】 These two camera slider support arms can increase stability when using a slider on a single tripod—no need for a second tripod. Maximum load is up to 7kg/15.5lb.
003cp003e【Extendable Slider Support Arm】 The slider support arm can be adjusted from 23.2”/59cm to 37.8”/96cm in length. Ideal for sliders of various sizes.
003cp003e【Wide Compatibility with C Clamp】 The support arm is attached to your tripod with the C-clamp. The maximum adjustment width of the C-clamp is 2”/5.2cm. The clamp also has non-slip rubber padding to increase friction and prevent scratches on the tripod legs. Compatible with a wide range of tripods with thin or thick tripod legs.
003cp003e【Quick Installation with Ball Heads】 There are two mini-sized ball heads on both ends for easy, time-saving multi-angle mounting.
003cp003e【Easy to Carry】 The adjustment knob is designed to help you quickly adjust the length and securely lock the arm during shooting. The support arm can be stored in a tripod bag (with a storage length of only 23.2”/59cm) so it’s easy to take on your journey.
Macro Focusing Rail Slider for DSLR MILC Camera Tripod Ballhead and Phone Portable Damping Video Stabilizer Track Mini Precision Focus Close-up Shooting Clamp Plate for Macro Photography and Video
The main body of the macro focusing rail slider is made of aviation aluminum, CNC precision machining, corner grinding, surface anodizing and laser....
The inside of the portable damping video stabilizer track used 12pcs 9mm diameter metal bearings and 2pcs 11.5mm diameter copper pulleys, equipped....
The outer part of the mini precision focus close-up shooting plate is about 210mm long, about 60mm wide and about 20mm high. The inner sliding track....
The max load of the rail clamp slider is about 3kg. The stainless steel wire is used to transmit power. The rail slider has an independent resistance....
The track is suitable for Camera MILC and lens, tripod ballhead and phone. Can be used for Macro Photography and Video..
Wyze Cam Pan Mounting Kit, 15 Foot Micro USB Cable Included
COMPATIBILITY: Wall Mount for Wyze Cam V3 & Wyze Cam V2 & Wyze Cam Spotlight, provides better viewing angle for Wyze Cam camera. Note: Wyze Camera is not included, bracket not included..
TWO INSTALLATION METHODS: The Wyze wall holder can be installed with 3M stick on or wall screws. It is very easy to install with 3M tape strong adhesive, no tools needed, no messy, no drilling. Another installation methods-wall screws holder are installed more firmly and the wall can be used wider range..
PLUG-IN DESIGN: The wall holder adopts a plug-in design, which is easier to install and not damage the camera. The Wyze camera only needs to be inserted into the bracket, no screws, no mess install, and will not affect the 360 -degree rotation of the camera..
SPECIAL DESIGN: The Wyze Cam V3 mount is designed with a slider auxiliary board. When the auxiliary board is removed, it is the Wyze Cam V2 bracket, providing a suitable choice for your Wyze Cam Camera..
Wide Applicability: The Wyze Camera bracket can be installed on glass, wall, cabinet, ceiling and any other place, including paint, outdoor, etc. Note: 3M tape cannot be installed on dirty, uneven and flat surfaces with water..
Ruth&Boaz Full Grain Leather Camera Strap, Camera Wrist Strap, Luxury Camera Strap (Black)
Safe and functional wrist strap that fits a wide range of equipment, from compact mirrorless to medium format cameras..
This handmade Italian leather camera hand strap is comfortable and soft. Designed to sit comfortably around your wrist while using your camera, you can adjust the slider for a tighter or looser fit..
We hand dye and bevel edges of the leather to ensure they are soft and comfortable to wear all day..
All straps contains protective leather o-ring strap bumpers to avoid any scratch on the surface of your camera..
Classic Leather Camera Straps are compatible with all round lug mount DSLR, film SLR, digital mirror less and rangefinder cameras. The straps are 0.79"/0.47" width and their length is 8.3". Loop size Maximum 7" Minimum 4.3".
NEEWER Pro 4 Way Macro Focusing Focus Rail Slider with 1/4" Arca Type Quick Release Plate Compatible with Canon Nikon Pentax Olympus Sony and Other DSLR Cameras and Camcordes Great for Close Up
DURABLE IN USE: The rail adopts durable metal slider, and a geared drive system which enhances accuracy.
Positive locking knobs assure rock steady focus.
4 DIRECTION SLIDING: It can be adjusted in 4 directions with 2 rails: forward, backward, left and right (Front Back Movement Distance: Max 2.56""/6.5cm.
Left right Movement Distance: Max. 2.95""/7.5cm).
Kindly please tighten the knobs after you adjust to keep the camera from slightly moving after you have set it up.
PROVIDE EXTREME FOCUSING: Speed of adjustment of the rail greatly with 2 knobs.
There are 8 pieces hexagon screws, which can be adjusted with the included wrench to control the sliding friction..
Focusing rails are essential accessories for macro photography, which requires precise distance modifications and a steady hand, as well as other situations where accurate camera positioning is crucial.
COMPATIBILITY: The rail is equipped with an integrated Arca type QR clamp and an included Arca type plate. The plate uses a 1/4"" screw mount compatible with Canon Sony Pentax Nikon Olympus Samsung and most cameras. The rail can also be mounted on most tripods by utilizing the bottom 1/4"" and 3/8"" tripod mounting threads.
