Best Slim Scope Mount

Ade Advanced Optics PS001C 30mm Offset Cantilever One Piece Rifle Scope Mount

  • This is a 30mm one piece riflescope rings. Mounting rings are pushed forward 2" for better eye relief..
  • ADE Cantilever Mount was designed by the experienced merchandise experts and ADE is able to get it from OEM manufacturer to sell at a fraction of cost compare to other brands where purchase this same mount and resale for a lot higher.
  • Our 3-bolt clamping systems with over 6,500 lbs of clamping force hold your scope firmly to the rail. Relief cuts designed into the scope tube bearing surfaces prevent scope pinching and ensure clamping forces are evenly distributed along the top and bottom of the scope body..
  • The Mount has no protruding levers, bolts, or knobs to rap your knuckles, or get caught on clothing, gear, and surroundings.
  • Height" 1.5". Weight 6oz. Screw Torque - 15 in-lbs. We are so confident in these mounts they are covered under our excellent Lifetime Warranty..
Check Stock

350 Yards Green Light Hunting Flashlight Rechargeable Predator Lights Coyote Varmints Green LED Tactical Flashlights Set with Pressure Switch Rails Mount and Charger

  • Super Bright Long Range Green Cree LED Light Flashlight Hog Coyote Varmints Predator Pig Foxes Bobcats Rifle Night Vision Hunting Light Spotlight....
  • Varmint Light with Spotlights for Hunting, with Single 1 mode and 1000 lumens, flood light at 350 yard, long distance. Made of high quality aluminum....
  • Predator Light with 2 mounts: 1 x Plastic scope Mount for 1inch to 30mm flashlight, scope, telescope, sight.
  • 1 x Sturdy Aluminum Rails Ring Mount w/....
  • Coyote Light Ultra Bright Long light throwing equiped on standard 20 mm Picatinny mount,equiped with Scope Mount. With Remote Pressure Switch for best....
  • Green Hunting Light Includes: 1 x Green Hunting Flashlight, 1 x Charger, 1 x 2 modes Remote Pressure Switch, 1 x 2 mounts(1 x Aluminum Rails Mount, 1....
Check Stock

FENTUK 1

  • 2 Pack FENTUK Scope Ring Adaptors With Picatinny Rail- 1 Inch & 30mm ring with picatinny top rail provides a solid mounting platform for adding an additional backup sighting tactical accessories to your rifle scope. Four screws on this ring ensure that the back-up sight will hold zero shot after shot, provide dependable long-lasting durability..
  • Fit for 30mm & 25.4mm Scope Tube- Our rifle scope ring adapter with picatinny style, each ring with circular hard gasket design, the diameter of the ring from 30mm/1.18 inch to 25.4mm/I inch, effectively switch between two sizes, perfectly meeting your different needs!.
  • 4 Slots Picatinny/Weaver Top Rails- Top 4 Slots 1.77" picatinny rail design, allowing you add on standard 21mm Picatinny or Weaver accessories, such as tactical flashlight, laser scope sight, red dot sights, micro red dot, backup/second laser sights, optics and other accessories..
  • High Quality Aluminum, Solid & Durable- Precision machining of aircraft grade aluminum alloy in black matte anodizing finish. Sturdy & durable, lightweight & compact construction, offer stable safe performance in the field. Item size: 1.77"L x 1.72''W x 1.70''H, item weight:1.38Oz/1 pcs..
  • Easy To Install & Remove- Our Scope Ring Barrel Mount is easy to install or remove ....
Check Stock

Monstrum Dual Ring Scope Mount for Savage Arms Axis/Edge Rifles | 1 Inch Diameter | Pre 9/2021 Models

  • Please note that as of 9/2021, Savage Arms has altered the drill hole pattern on newly manufactured Savage Axis rifles. Check the serial number on your rifle. For models manufactured before 9/2021 (Serial numbers below N936371), purchase the Pre 9/2021 compatible mount. For models manufactured after 9/2021 (Serial numbers above N936371), purchase the Post 9/2021 compatible mount..
  • Dedicated one piece dual ring scope mount built specifically for the Savage Arms Axis/Edge platform.
  • 1 inch in diameter for precision mounting of standard 1 inch tube rifle scopes.
  • Precision machined from 6061 grade aluminum, comparable in weight to most scope rings with the added rigidity of a unified one piece mount design.
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

ohhunt 30mm Scope Mount Cantilever Scope Mounts for 30mm Tube Rifle scopes (Tan)

  • 30mm scope mounts with Torx Screws and Square-shaped Integral,Recoil Stops for a Secure and Repeatable Zero Hold..
  • Square-shaped Integral Recoil Stops Perfect fit Picatinny Rail,Slots(Not suitable for Weaver Slots)..
  • The 2.6-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief..
  • Scope mount with a base of 3 inches and 2.36 inches of spacing between the rings..
  • The cantilever ring mount positions the center of the riflescope tube at a height of 1.57 inches (40 mm) from the base..
Check Stock

CBE Vertex Elevate Target Sight, Black

  • Center pivot 1st, 2nd, and 3rd axis adjustments.
  • Scope tube locating collar to ensure scope is placed in the exact same position after travel.
  • Enhanced quad track elevation support for smooth and stable adjustments.
  • Zero backlash .002" per click windage and elevation adjustments.
  • 24 turn / 20 click windage and elevation.
  • Interchangeable sight scales can be mounted on either side of the elevation bar.
Check Stock

CVLIFE 1’’ Dovetail Scope Rings for 3/8’’ or 11mm Dovetail Rails, High Profile Scope Mounts, 2Pieces

  • ✔Double dovetail rings for 3/8’’ or 11mm dovetail mount specialized scope mount for .22/Airgun..
  • ✔ The dovetail ring is for most scopes which are in 1''/ 25.4mm scope tube..
  • ✔ High profile, 20.4mm(0.8 in) from top of the dovetail rail to bottom of rings ( Item height: 1.9'')..
  • ✔ Built-In Tape Inside Per Rings To Prevent From Marring The Scope, Also Prevent Sliding and Holding Postion Accurately..
  • ✔ With two rail clamp screws and two scope clamp screws, Precision and Repeatable Alignment..
Check Stock

Fidragon Scope mounts Scope Rings QD Scope Mount Ring Riflescope Rings 1 inch Scope Mount 2 Pcs

  • A good set of Quick release rings. Riflescope Rings 1 inch Scope Mount 2 Pcs.
  • the quick release function on each ring as long as the scope stays mounted to the rings..
Check Stock

WestHunter Offset Cantilever Dual Ring Picatinny QD Scope Mount, 1 inch 30 mm Quick Release Scope Rings | Black

  • Position the center of the scope tube at a height of 1.42 in / 36 mm from the base.
  • The high profile QD cantilever scope mount fits for both 30mm and 25.4 mm (1 inch) tube optics with up to a 70mm outer objective diameter.
  • Scope mount with qick detach locks for Picatinny rail, can freely adjust the tightness of the base to ensure stability.
  • Precision CNC Machined from 6063 T5 aircraft-grade aluminum alloy and finished in anodizing.
  • Easy installation, perfect for shooters(Sold 1Pcs mount per package).
Check Stock

STARSCOPE Monocular G3 Phone Mount - Dual Spring-Loaded Telescope Phone Adapter Mount | Foldable Monocular Telescope for Smartphone Mount | Adjustable, Clip-On Monocular Telescope Phone Mount

  • NEW UPGRADED MINI TELESCOPE CELL PHONE ADAPTER MOUNT - With our new upgraded, adjustable monocular phone clip, you can take perfectly framed, next-level photos with your phone and Starscope monocular for iPhone and Android. Just clip on and enjoy ultra-stable photography!.
  • HIGHLY SECURE MONOCULAR TELESCOPE SMARTPHONE ADAPTER - The Starscope monocular phone adapter secures the 10x monocular scope for bird watching, letting you unleash the photographic power of the super clear Starscope monocular telescope. Designed for Starscope monoculars for adults with 44mm diameter eyecup..
  • USE AS CELL PHONE MOUNT ADAPTER FOR IPHONE, ANDROID, AND MORE - The brand new Starscope smartphone adapter for a telescope securely holds smartphones from 2.2” (57mm) to 4.3” (110mm) wide. The telescope smart phone adapter for every phone..
  • STARSCOPE PHONE ATTACHMENT UPGRADES YOUR PHOTOGRAPHY - The Starscope monocular telescope for smartphone mount works to maximize your telephoto mobile photography and videography for professional-quality content!.
  • DUAL SPRING-LOADED CELL PHONE TELESCOPE ADAPTER - The spring-loaded smart phone adapter for telescope and sturdy eyepiece keeps your phone secure when setting up and snapping the perfect shot..
  • PORTABLE MONOCULAR MOUNT FOR PHOTOS ON ....
Check Stock