SparkFun MicroMod LoRa Function Board - 1W 915M30S LoRa Module Frequency Range: 900 - 931MHz Transmit Power 28.5 - 30dBm (max) Modulation LoRa, FSK, GFSK, MSK, GMSK, OOK Antenna Impedance: 50Ω
The 1W LoRa MicroMod Function Board adds LoRa capabilities to your MicroMod project. It is intended to be used in conjunction with a MicroMod processor board and a MicroMod main board, which provides the electrical interface between a processor board and the function board(s)..
Utilizing the 915M30S LoRa module from EBYTE, which is a 1W (30dBm) transceiver based around the SX1276 from Semtech. There is a robust edge mount RP-SMA connector for large LoRa (915MHz) antennas.
with modification, a U.FL connector is also available. We've successfully tested a 12 miles line-of-sight transmission with this module (user results may vary)..
1W 915M30S LoRa Module Features: Based on SX1276 chipset from Semtech.
modulation: LoRa, FSK, GFSK, MSK, GMSK, OOK.
Data Rate: FSK: 1.2 - 300kbps, LoRa: 0.018 - 37.5kbps.
Note: A MicroMod Processor, Main Board, and antenna are not included with this MicroMod LoRa Function Board. These parts will need to be purchased separately.
Ep.#2.3 - "Resurrection" (The Frontiers Saga - Part 2: Rogue Castes Book 3)
✦Tracer-AN series support PC software, APP and MT-50 to monitor or set the parameters. Automatically identifying 12/24/36/48V DC system voltage, compatible with various battery options: Sealed, Gel, Flooded and Lithium..
✦Maximum input current: 100A. Maximum PV input power: 1250W/12V.
5000W/48V. Maximum input voltage(open circuit voltage): 150V. Common negative grounding..
✦Advanced MPPT technology & ultra-fast tracking speed, with tracking efficiency no less than 99.5%.
maximum DC/DC transfer efficiency is as high as 98.6%, full load efficiency is up to 98%..
✦With Battery temperature compensation function, real-time energy recording and statistical function. Hundred percent full load operation in working environment temperature range within charging & discharging..
✦The isolated RS485 interface with standard MODBUS communication protocol support up to 8 charging in parallel, so that can be widely used for various applications, e.g. solar RV, household system and field monitoring etc..
USB to RS232/RS485/TTL Industrial Isolated Converter with Original FT232RL Inside,ADI magnetical Isolation TVS diode,Industrial Equipment for high Communication Requirements or Applications
Support USB to RS232, USB to RS485, USB to TTL (UART) communication.
ADI board integrally coupled magnetically isolated, a signal can be isolated, high reliability, strong anti-interference, low power consumption.
High-quality USB-B and RS232 interface materials, smooth plugging and unplugging, firm and reliable.
Original FT232RL, high-speed communication is stable, reliable, and compatible.
Onboard TVS (transient voltage suppression tube), can effectively suppress the surge voltage and transient spike voltage in the circuit, lightning....
Logarithmic Amplifier Module ±0.4 DB RSSI Linearity with Limiting Output Can Be Used As FSK PSK Demodulation
AD8309 AMPLIFIER MODULE - AD8309 amplifier module, with limiting output, can be used as FSK PSK demodulation..
APPLICATION - Used for received signal strength indicator (RSSI) and phase detection in cellular base stations, radar and other radio transceiver applications..
16mA current, 20 mV/dB slope, ‑95 dBm intercede, SMA female, 5MHZ‑500MHZ frequency range, 100 dB gain..
±0.4 DB RSSI LINEARITY - ±0.4 dB RSSI linearity, RSSI scale does not change with temperature and feed voltage..
Logarithmic output of the logarithmic amplifier module is proportional to the logarithm of the input signal..
Waveshare USB to RS232 / RS485 / TTL Industrial Isolated Converter with Original FT232RL Embedded Protection Circuits and Aluminium Alloy Enclosure for Industrial Control Equipments
This is an industrial USB to RS232/485/TTL isolated converter with original FT232RL inside. It features embedded protection circuits such as power....
The USB TO RS232/485/TTL is very easy to use fully automatic transceiving without delay. Due to its fast communication stability reliability and....
Fully automatic transceiver circuit with no delay ensures the USB port communicates with different interfaces fastly and stably without interfering....
Onboard unibody power supply isolation provides stable isolated voltage needs no extra power supply for the isolated terminal.
High quality USB-B and RS232 connectors smoothly plug/pull.
5PCS HC-05 Wireless Bluetooth Receiver RF Serial Transceiver Module Master Slave Integrated Bluetooth Module 6 Pin Wireless Serial Port Communication BT Module
HC-05 Bluetooth Module is an easy to use Bluetooth SPP (Serial Port Protocol) module, designed for transparent wireless serial connection setup..
Default baud rate:9600, Button: Press the button.
the module enter the AT mode. AT commands are executed only in AT mode..
HC-05 is able to operate in both master and slave mode. Its communication is via serial communication which makes an easy way to interface with controller or PC. It's ideal replacement to your wired serial connection..
HC-05 Wireless BT Module: with this HC 05 Bluetooth module,You can quickly add the Bluetooth feature to your motherboard project, and then you can use your android phone to control some gadgets, such as: switch, LED..
Note: The module doesn’t suitable for IOS system..
Logarithmic Amplifier Module ±0.4 DB RSSI Linearity ‑95 DBM Intercede, Sma Female Can Be Used As FSK PSK Demodulation
16mA current, 20 mV/dB slope, ‑95 dBm intercede, SMA female, 5MHZ‑500MHZ frequency range, 100 dB gain..
APPLICATION - Used for received signal strength indicator (RSSI) and phase detection in cellular base stations, radar and other radio transceiver applications..
Logarithmic output of the logarithmic amplifier module is proportional to the logarithm of the input signal..
±0.4 DB RSSI LINEARITY - ±0.4 dB RSSI linearity, RSSI scale does not change with temperature and feed voltage..
AD8309 AMPLIFIER MODULE - AD8309 amplifier module, with limiting output, can be used as FSK PSK demodulation..
Goupchn N to RP-SMA Connectors Kit RF Coax Coaxial Reverse Polarity SMA Male Female to N Type Male Female Adapter Convertor for WiFi Antenna Extender Transceiver
N to RP-SMA coax connectors are made of high quality copper nickel plated which can achieve higher signal transmission and extremely low signal loss. Impedance: 50 Ohm..
Adapters are all made precisely. They will not fall off easily during use. It is easy to connect N to RP-SMA Type Device. Compatible with N type and RP-SMA connectors or extension cable..
Perfect for working with antennas, wireless LAN devices, RF coaxial connector, RF coaxial cable, Wifi, handheld radios, external antenna, broadcast, telecom, CCTV, LMR, microwave applications and digital communication system..
Come with 4PCS rp-sma to n adapters. You can purchase the most comprehensive products with the least cost..
Warranty: Hope you can be satisfied with our adapters. We provide guarantee of a 30-day replacement or refund for any problem and 1 year warranty. If you have any question, feel free to contact us..
Renogy Rover 40 Amp 12V/24V DC Input MPPT Solar Charge Controller Auto Parameter Adjustable LCD Display Solar Panel Regulator fit for Gel Sealed Flooded and Lithium Battery
Automatically detect 12V or 24V DC system voltages Innovative MPPT technology with high tracking efficiency up to 99% and peak Conversion efficiency....
Die-cast aluminum design for heat dissipation and The capability of measuring the battery's temperature and remote monitoring Customizable charging....
Compatible with various Deep Cycle battery options: Sealed, Gel, Flooded, and Lithium Electronic protection: Overcharging, over-discharging, overload,....
RS232 port allows the Rover to communicate with the BT-1 Bluetooth module, which can pair with the Renogy DC Home smart phone app.
