Best Small Centrifugal Pump

Husqvarna 16 Inch 130 Gas Chainsaw,Orange

  • Husqvarna 130 16 inch chainsaw is easy to start and easy to handle, making it a valuable tool for a variety of home and garden tasks—recommended for use with bar lengths between 14 inches (min) and 16 inches (max).
  • Effortless Start-Up: A fuel pump and combined choke/stop control allow for easier starting and reduce the risk of engine flooding, while the gas chainsaw 16 inch blade has an inertia-activated chain brake to reduce the likelihood of injury due to kickback.
  • Superior Performance: Gas powered chainsaw delivers superior performance with an efficient 38-cc, 2-HP X-Torq engine that reduces emissions (up to 60%) and increases fuel efficiency (up to 20%).
  • Air Injection Technology: Chainsaws equipped with a centrifugal air cleaning system that expels larger dust and debris particles before they reach the air filter for improved engine life.
  • Easy Handling: This cordless chainsaw features LowVib technology that uses dampeners to reduce vibrations and minimize operator fatigue for easier handling of recommended 14 to 16-inch chainsaw bars.
Check Stock

Ace Hydraulic Driven Centrifugal Pump 1.25" Suction x 1" Discharge USA Made Farmer Bob's Parts FMC-HYD-204

  • Suction 1-1/4" Discharge 1" 204 motor requires 4 GPM hydraulic flow on PC Closed and Open Center Systems Integral Needle Valve bypasses up to 9 GPM on Open Center Systems Standard with Viton Carbon/Ceramic Mechanical Seal Chemical Resistant Valox Impeller Cast Iron Pump Stainless Steel Shaft and Wear Ring Maximum Gallons Per Minute - 85 GPM Maximum PSI - 100 PSI Do Not Run Dry - Seal damage will result from running dry. Impeller damage may also occur if run dry for an extended period..
Check Stock

Centrifugal clutch Go kart clutch Predator 212 clutch 3/4" Bore 10 tooth with bolt Compatible Predator 212cc 196CC & GX160 GC160 Up to 6.5 hp Engine

  • Centrifugal Clutch 3/4" Bore 10 tooth Compatible whit 212cc 196CC 2hp-7hp Engines.
  • Centrifugal Clutch 3/4" Bore 10 tooth Compatible whit GC160, GC190, GX120, GX140, GX160, GX200 2hp-7hp Engines..
  • Centrifugal Clutch 3/4" Bore 10 tooth Compatible whit B&S Tecumseh 2-6.5 HP and with 3/4” with 3/4" Bar Shaft and 3/16" Key Way engines..
  • Centrifugal Clutch 3/4" Bore 10 tooth Compatible whit Single Wheel Belt Direct Drive Karts with Tires No Larger Than 15" Tall..
Check Stock

Centrifugal clutch Go kart clutch Predator 212 clutch 3/4" Bore 12 tooth with bolt Compatible Predator 212cc 196CC & GX160 GC160 Up to 6.5 hp Engine

  • Centrifugal Clutch 3/4" Bore 12 tooth Compatible whit 212cc 196CC 2hp-7hp Engines.
  • Centrifugal Clutch 3/4" Bore 12 tooth Compatible whit GC160, GC190, GX120, GX140, GX160, GX200 2hp-7hp Engines..
  • Centrifugal Clutch 3/4" Bore 12 tooth Compatible whit B&S Tecumseh 2-6.5 HP and with 3/4” with 3/4" Bar Shaft and 3/16" Key Way engines..
  • Centrifugal Clutch 3/4" Bore 12 tooth Compatible whit Single Wheel Belt Direct Drive Karts with Tires No Larger Than 15" Tall..
  • Go Kart Clutch kit:Clutch and bolt & hexagonal wrench.
Check Stock

Desktop Electric Lab Laboratory Centrifuge Machine Lab Medical Practice w/Timer and Speed Control,Low Speed,Capacity 20 ML x 6-110v,4000 RPMby CALU LUKY

  • Centrifuge Machine -Time Rang:0~60min or without limit. Maximum relative Centrifugal force: 1790×g. Electric current:AC110V 60 HZ. Capacity:20ml×6.
  • Maximum speed: 4000r/min.6 Tubes are provided in this lab centrifuge, the centrifugal capacity is 20ml per tube, benefitting your workflow efficiency.
  • Widely Used:Table-centrifugal machines are widely used in the laboratory or produce department for organisms、 medical、 chemistry etc. Our lower....
  • Lab Benchtop Centrifuges:Please insert the tubes into the machine symmetrically, or will not work properly in an asymmetric state.It has 3 adjustable....
  • Easy to Install:Centrifugal machine is easy to use with its clear control panel for controlling the speed and time. bench-top centrifuge is equipped....
Check Stock

Electric Centrifuge Machine Lab Centrifuge 8x20ml 4000rpm for Serum/Fat Separator PRP Extractor 110V US Plug

  • [PARAMETERS] Capacity: 8x20ml, speed: 0-4000rpm, relative centrifugal force: 1920xg, voltage: 110V, timing: 0-999min.The test tube capacity of this centrifuge is 20ml, and the actual centrifugal capacity should not exceed 80% of the test tube capacity. This is the best centrifugal effect..
  • [TIMING&SPEED CONTROL] 0-4000rpm speed is adjustable, 0-999min timing, please adjust the time and speed according to your needs..
  • [LCD DISPLAY] Real-time display of speed and time on the digital display screen, you can check the remaining time during work..
  • [TRANSPARENT COVER] The transparent cover is convenient for observing the centrifugal effect, and has the function of opening the cover. After the cover is opened, the machine will stop rotating immediately..
  • [Satisfactory service] We provide a one-year warranty period, if you have any questions after receiving the goods, please contact us directly. We will give you a satisfactory answer within 24h..
Check Stock

QWORK Centrifugal Casting Crucible, 2 Pack Zirconia Casting Cup Machine Crucible Hooded for Dental Lab, Over 200 Times of Use

  • High quality: QWORK Casting Cup made of fused silica and high-quality zirconia..
  • High efficiency: Can be used more than 200 times by centrifugal casting machine, can be used about 20 times by high-frequency casting machine..
  • Note: It is recommended that the melting temperature is not higher than 1371 degrees Celsius or 2500 degrees Fahrenheit..
  • Widely used: Suitable for replacing the ceramic crucible of the centrifugal casting machine..
  • Package include: 2 Pack Centrifugal Casting Crucible..
Check Stock

PRP Centrifuge - DEJUN 4000rpm Lab Benchtop Centrifuges with Aluminum Alloy Rotor 8 x 10/15ml and Digital Display Laboratory Low Speed Desktop Centrifugal Machine

  • The PRP centrifuge has an aluminum alloy rotor which can be disinfected in high temperature, adopts good laboratory-quality material, meets the needs of daily use, has a nice appearance, large capacity, high efficiency, small size. The electronic door lock ensures overspeed protection..
  • Our lab centrifuge machine is driven by a brushless motor not the carbon brush, which provides a longer life. It adopts microcomputer control with automatic RCF calculation and setting, and intuitive digital display..
  • The low speed benchtop centrifuges runs smoothly with low vibration and low noise. Using a PRP centrifuge to separate the PRP tube can achieve a better separation effect..
  • This desktop centrifuge can set up speed, centrifugal force and time on the lab centrifuge, the parameters can be modified during operation to achieve a satisfactory centrifugal effect, and the operating parameters can be automatically memorized for convenient operation..
  • It is widely used in plasma qualitative analysis of life sciences, beauty institutions, medicine, food, chemical and biological laboratories..
Check Stock

L20-202Y 20mm Electric Motor Centrifugal Switch, Electric Clutch Controller Parts 3000RPM

  • Motor centrifugal switch: Shaft diameter 20mm, 3000RPM..
  • Advantages: Helps to start the motor safely and quickly. Easy to install and easy to use..
  • Model: The number behind the model L of the centrifugal switch is the size of the large round hole and the size of the motor shaft. For example, L20-202Y, the shaft diameter is 20mm..
  • The difference: The centrifugal switch is divided into a centrifuge and a bottom plate, and the bottom plate is mainly at a different contact position..
  • Friendly Tips: There are two levels and four levels. The two levels are 3000RPM, the numbers are 2.
  • the fourth level is 1500RPM, and the number ends with 4..
Check Stock

PRP Centrifuge Lab Desktop Centrifuge with 12x10ML Place Rotor, 110 V Variable Speed 500-4,000 RPM Benchtop Centrifuge,90 Min Timer

  • [Automatic protection function]: Automatic protection functions such as over-speed rear door cover ensure safety, proprietary air-guiding design, low temperature rise, and effective protection for samples.
  • [Microcomputer control]: This machine adopts brushless motor, microcomputer control, with RCF automatic calculation and setting. With a variety of program protection, the operation is simple. Touch screen, intuitive digital display, can set speed, centrifugal force and startup time, and can modify the parameters during operation to obtain satisfactory centrifugal effect.
  • [Good quality]: The desktop centrifuge is made of hard, laboratory-quality materials and can handle hard daily use year after year. High-performance motors are quiet and maintenance-free. This laboratory centrifuge has a beautiful appearance, large capacity, high efficiency, small size, and meets international safety regulations.
  • [Stable operation]: The low-speed desktop centrifuge runs smoothly, with low vibration and low noise. Using a PRP centrifuge to separate PRP tubes can achieve better separation results.Suitable for 2- 5-7-10ml collection tube(do not order this item for uses with other sizes of tubes if you do not know whether it fits).
Check Stock