Gateron KS-9 RGB Mechanical MX Type Key Switch - Clear top (120 Pcs, Green)
SMOOTH – Gateron Switches are a favorite among enthusiasts for their smooth and satisfying typing experience as well as their lightning-fast gaming performance. They are available in 10 PCS, 65 PCS, 90 PCS and 120 PCS making them the ideal fit for 60%, TKL and full size keyboards..
GATERON GREEN – Clicky switches have a small bump on each keystroke and an audible click sound. The Blue Switches have 4mm of total travel and an actuation force of 60g. The satisfying click sound make these a perfect switch for a typist..
TRANSPARENT – The clear design is SMD compatible and lets light shine through the switch making them perfect for RGB LED keyboards..
DURABLE – Gateron KS-9 Switches have a lifetime rating of 50 million keystrokes, making them extremely durable and reliable..
COMPATIBILITY – The plate-mounted mechanical switches are compatible with Cherry-Style Hotswap Keyboards such as Cherry MX, Kailh, Otemu and other mechanical Gateron Switches. The Gateron Switch is based on a 3 Pin PCB Design which is also compatible with 5 Pin PCB hotswappable Keyboards..
Gateron KS-9 RGB Mechanical MX Type Key Switch - Clear top (90 Pcs, Brown)
SMOOTH – Gateron Switches are a favorite among enthusiasts for their smooth and satisfying typing experience as well as their lightning-fast gaming performance. They are available in 10 PCS, 65 PCS, 90 PCS and 120 PCS making them the ideal fit for 60%, TKL and full size keyboards..
GATERON BROWN – Tactile Switches have a small bump on each keystroke with a moderate noise level. The Silent Brown Switches have 4mm of total travel, an actuation force of 55g. The sound level and feeling make these an ideal switch in the office..
TRANSPARENT – The clear design is SMD compatible and lets light shine through the switch making them perfect for RGB LED keyboards..
DURABLE – Gateron KS-9 Switches have a lifetime rating of 50 million keystrokes, making them extremely durable and reliable..
COMPATIBILITY – The plate-mounted mechanical switches are compatible with Cherry-Style Hotswap Keyboards such as Cherry MX, Kailh, Otemu and other mechanical Gateron Switches. The Gateron Switch is based on a 3 Pin PCB Design which is also compatible with 5 Pin PCB hotswappable Keyboards..
Aoicrie MKS Gen L V1.0 3D Printer Integrated Mainboard Controller PCB Board Compatible Ramps1.4/Mega2560 R3 with A4988 Motor Driver for 3D
...ent to 1/4 that slove the Mosfet heat problem efficiently and power shortage..
Support a variety of stepper drivers: A4988,DRV8825,TMC2208 and TMC2100, and available to work with LCD2004,LCD12864,MKS TFT24/28/32/35 & Available to connect external large stepp drivers, A4988 driver board widely used in 3D printers and small CNC machines..
Support functions: Non-trace resumption after power off, run out filament ,and auto shut down, XTZ axis with different color terminal controls the motors and end stop,which is convenient to wire.Use high-quality 4 layer PCB&Use special power chip.Retail Servos,AUX-1 and AUX-2 interface of Ramps1.4 provide three 5V output and three 12V output interfaces..
Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step.Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor's rated voltage toachieve higher step rates.Use the configuration file to set the driving current mode, avoid manual adjustment of the current to cause the burned drive, convenient, safe and reliable..
37 Pieces Hand Drill Tool Set Include Pin Vise Hand Drill with Miniature Drill Micro Mini Twist Drill Bit and Bench Vice for Craft Carving Resin Keychain Jewelry Making(0.3-1.2 mm PCB Drill)
Pin vise: made of quality aluminum alloy, durable and firm, adopt 3 claws chuck and 0.3 - 3.4 mm range of adjustable clamp which is sturdy and convenient for you to operate, its tail can be rotated, easy for you to use.
Bench vise: made of aluminum alloy and plastic, its light weight and small size make it suitable for you to hold and carry, designed with 4 plastic clips for clamping square, round and irregular objects of 0 - 57 mm size.
Twist drills and tiny drills: the drill bits are lightweight, won't take up extra spaces, can be applied for handling wood, plastic, rubber, PVC, walnut, model, bone, angle, amber, olive, fiberglass, and other materials.
Fit dimension: the pin vise is approx. 3.54 x 0.6 inches/ 9 x 1.4 cm, bench vise is approx. 4.3 x 2.4 x 1.4 inches/ 11 x 6.1 x 3.5 cm, can be appropriate for you to put in your bag or pocket.
Package content: comes with 1 x pin vise, 10 x PCB mini drills, 1 x bench vise and 25 x twist drills in 17 different sizes, sufficient quantity and adequate styles for you to carve your favored craft or DIY sculpture.
OLLGEN Auto Car OBD2 16 Pin Connector 16 Pin Male Connector Adapter Standard 16 Pin Male Plug OBD Shell OBDII PCB Diagnostic Tool Blue
Male Adapter with PCB: It can connect circuit board or weld line with PCB board.The shell is easily four inches long, plus a spring strain relief. you....
The soldier pads inside the shell do not have all the pins broken out, but you can just solder to the pin connections directly for odd pin outs. Note....
Used to build a breakout box:Lots of cars do not have 16 pin connector,such as some old cars. However now lots of diagnose tool is 16 pin connector,so....
Notice:It is just a small connector,do not have any accessory or software.Has a circuit board you could tack connections..
FDSF USB 3.1 Type C to Type C Extension Cable 90 Degree FPC FPV Ribbon Flat USB C Cable 3A 10Gbps EMI Shielding, 30cm
The PCB is made of high-quality materials with high frequency and low resistance. The PCB is made of precision. The PCB uses high TG plates. The thickness of the copper material is thickened to 1oz. The PCB power circuit is strengthened and the use of 2 5V power core wires is strengthened, so that the transmission current is more powerful. Support up to 3A..
The differential signal has no via hole design, the signal is pure, there is no signal attenuation interference problem of parasitic capacitance and parasitic inductance, and there is no CAF short circuit phenomenon, and the product is durable..
Product application: GPS navigator, storage device, imaging device, for Pi 4 for MCU development board, built-in USB device to extend the use of , convenient for USB power supply and USB signal transmission of SLR handheld pan/tilt, etc..
Cable length Description: The length of the wire refers to the part of the visible wire. It does not include the PCB and the connector..
Package Included:Plastic Case + Feet + Stabilizers + GK64x Hotswap Type C PCB + Plate + Cable + Removal Tool + Space Module.
Pls note:GK64x is wired kit.The PCB is fully programmable with GK software,the Fn key is the last key at the bottom and can't change place.If some keys not working after plugging,please check whether your switch pin is bent or not.Make sure plug in 90 degree above plate.
This kit support 6.25u space and split double space.This plate is screwed to case directly.So if you want to replace normal GH60 case,you need to replace a non -replacable GH60 size plate is ok..
PCB has RGB presoldered,it's under per switch.This kit need to use Cherry MX switches and clones,optical switches is not supported.
There is no switches in the kit,you can order Cherry Gateron Kailh SMD Box switches etc yourself.Just put in switches in PCB is ok,no need soldering again.3 pin 5 pin both are ok.
Gateron V2 Clear Stabilizers PCB Mount Screw in Stabilizer Customized Distance No Dropping Wire for Mx Mechanical Keyboard PCB (Gateron Stab V2 Clear 1+4)
This is Gateron PCB Mount Screw In Crystal Stabilizer，.
Package Included：1x6.25u +1x7u +4x2u PCB Mount Screw-in Stabilizers + pad + Screws For 60% 68 75 84 87 Keyboard.
The plastic inserts and boat only has 10 pcs each. There is extra wire presented, but no plastic insert boat presented.
If your keyboard is 96 or 104 108 layout,need to buy 2 set.
This stabilizers are PCB screw-in stabilizers which is directly mounted on PCB.V2 stabilizers is designed to prevent the wire from dropping off.It's more stable than old edition..
YMDK Aluminum Brush Finish ANSI Anodized Positioning Board Plate Plate-Mounted for GH60 PCB GK61 GK61x Hot Swap PCB
Package Included: 1x plate.There is no screws and copper stand included..
Pls note: Original GK61 GK61x GK61xs plastic case can't use this plate directly.Need to replace a GH60 compatible case.
This plate is anodized brush finished.It can only use with plate mounted stabilizers.
If you use with GK61 /GK61x PCB,can just mount 4-5 switches into the plate corner and then plug to PCB socket totally.After the plate PCB fixed,then mount other switch in 1 by 1 is ok.At last screw plate PCB togehter to GH60 size case is ok with the screws in your case..
