Massive Audio EX44 - Car Audio 800 Watt, 200w x 4 RMS, Nano Edge Series, 4 Channel Car Amplifier, Bass Boost
... One of the best values you will find for a car amplifiers for cars in the market! This 12v car amplifier features: 100w x 4 RMS @ 2/4 Ohm / 400w x 2 MAX, Freq: 10Hz - 25KHz, 0~12dB, .
PRODUCES POWERFUL, CLEAN, FULL SOUND | Don't settle for weak sounding or underperforming car amplifiers. Your car audio system would not be complete without our multi-channel Massive amplifier. This car audio amplifier features: Built-in OEM line converters with RCA inputs that can take a high level speaker signal at up to 10 Volts directly in. Input Level 0.4V - 10V Hi Inputs or Low Inputs..
QUALITY TESTED AND GUARANTEED TO ALWAYS REACH ITS RATED POWER | Get more wattage and quality sound for less money! That is our guarantee! You don't need to set the gains to low to avoid distortion. These car amplifiers provides high power with low efficiency. Also, by sensing the DC offset of a factory radio it can activate the ATO (Auto Turn On) feature and Next Generation Advanced 5 Way Protection Circuitry..
No more Hum/Buzz/Noise, No More Rolling Line.With this unit,you can eliminate audio hum/buzz/noise and horizontal scrolling bars caused by ground loops..
Product shows superior RF performance operating at a frequency range of 5 - 1,000 MHz. Maximum insertion loss is 1.5 dB. at 1 GHz..
Perfect design with a metallic housing that provides excellent RFI shielding of 003e 85 dB. The Housing is environmentally sealed against moisture and humidity..
Each end of the isolator is a nickle-plated 75 OHM machined female F connector.
Note: If your cable by pass the DC current, it will not work. Normally the signal from the antenna or coax cable belongs to low voltage AC current and our Isolator will work with it..
Application - As a damping element for welding machine and other equipment for vibration, shock and noise control.
Compact & Stable - Made of Natural rubber and steel.
Simple geometrical design supports dynamic performance and stability under lateral (sideways) forces.
Damping Element - Protect the body's normal work and get good surroundings, damping noise reduction and the effect is obvious.
In the radio equipment, instruments, protect machine vibration interference, having a good buffer.
Suitable For - This rubber isolator mounts mainly used for air compressors, diesel engines, gasoline engines, water pumps, office facilities, aviation, construction, automobile, etc.
FEATURES - USB isolation 5000V DC between USB host and USB device. USB 2.0 compatible, 1.5Mbps low speed and 12Mbps full speed Bi-directional communication. Isolated power supply in device through a DC-to-DC converter. Transfer Rate 1.5 / 12 Mbps.
APPLICATION - Medical and Industrial Application USB to USB Single Port Isolator up to Full Speed 12Mbps. USB isolator is USB bus powered and can provide 5V 320mA to your USB device with built-in isolated DC to DC converter. This is possible when the isol.
COMPATABILITY - With support on multiple OS platforms this makes ours very versatile. Supported OS platforms are Windows 7, 8 and 10 as well as Linux and MacOS 10.X.
WHY Cablemax? Your Trusted Partner based in the USA, Providing Advanced Engineering, Highly Reliable and Superior Built Products to handle the most demanding industries for over 20 years. Reach out to us for CAD, Mechanical Drawings and, Data Sheets..
Supports Windows 7, 8, and 10. Mac & linux with no driver required..
Ground Loop Noise Isolator for Car Audio/Home Stereo System with 3.5mm Audio Cable Black
COMPACT AND PORTABLE : Being so mini and light-weight (2.01*0.59*0.59 IN, 0.99 OZ), this little gadget does not take much space and can be easily....
COMPATIBLE MODELS : Works with any portable device that has 3.5mm audio jacks, for your Car Audio System/Home Stereo, when grounding issues persist.....
ELIMINATING BUZZING NOISE : Eliminating the buzzing noise, caused by ground loops which happens when the audio source and the speaker use the same....
NOTE: The Ground Loop Isolator connect to the AUX Jack in car to eliminate noise.You will enjoy good quality sound when use it with Ground Loop Noise....
WORKING PRINCIPLE : The working principle of this noise isolator is to achieve a clear speech/music by eliminating the current noise in some car....
Ground Loop Isolator RCA,ZDMYY Noise Filter for Car Audio Systems,Car Stereo Noise Suppressor for Eliminate Buzzing Noise
【Ground Loop Isolator】It is designed to help with a humming noise and or engine noise for radio's with no to connect to an amplifier that requires.
【Product Dimensions】Compact sized: cm/ inch.Working Voltage : AC 115/250V, 50/60Hz.
【Easy to install】The ground loop noise isolator is easy to install, plug and play when the wiring is correct, and isolate current noise..
【Scope of Application】Professional power filter for most of DC 12V devices. Effectively resolve the noise problem of audio. Widely used in car amplifiers, active subwoofers,computers, players,recording studios, conference room amplifiers,and other equipment..
Rubber Mounts M6 M8 Cylindrical Rubber Isolator Mounts Shock Absorber Anti Vibration Mount 1/4 Shock Absorption Mount w/Threaded Stud Vibration Isolator Silentblock Car Boat Bobbins, M6 Pack of 4
Deflection range: 0.05 in to 0.20 in, Lower Rod penetration: 1 1/4 in, Max. rod dia., 3/8 in.
LDS (low dynamic stiffness) rubber hanger vibration isolator helps reduce noise transmission and vibration from equipment, running over 1000 rpm.
General purpose double deflection for ceiling-suspended mechanical equipment and pipping. Double deflection LDS rubber element with projecting bushing helps steel to steel contact.
Package included: 2 x Hanger mount vibration isolator. Color Mark: Green.
Sinkr USB Isolator Module ADUM3160 USB to USB Voltage Isolator Module Support 12Mbps,Used to Isolate Noise in Circuit System
The ADuM31601 is a USB port isolator, based on Analog Devices, Inc., iCoupler technology. Combining high speed CMOS and monolithic air core transformer technology, this isolation component provides outstanding performance characteristics and is easily integrated with low and full speed USB-compatible peripheral devices..
In the noise sensitive scene, we can isolate the USB interface through this device. Such as high-precision USB data acquisition system and HI-FIaudio system..
USB isolator can be used in industrial environment. This equipment can effectively reduce the crash and damage probability of these equipment in industrial environment..
Only USB2.0 Full-Speed compatible.USB 2.0 High Speed Devices are Not Supported.
Support USB control transfer, bulk transfer, interrupt transmission, synchronous transmission/etc..
Rubber Cylindrical Vibration Isolator Mount with 2 Threaded Studs, Inch Size,3.15\Diameter, 1.97” Height, M12 Thread for Pump,Generator,Engine,Compressor, Motors,etc.
【Metric System】 Since the stud size of this product ls metric units when assembling the nut to the stud of this product,be sure to use M12 nut(M12xP1.75),not inch nut..
【Quality】 100% Virgin natural rubber is used in the production process..
【Used for multipurpose】Vibration Isolator is used for vast fields such as garage door opener,pump,blower,engine, generator,motor,fans,compressor, and more.
【Vibration absorption】Vibration Absorption Vibration Isolator significantly reduced unwanted vibrations and noise transmitted to living environment..