Best Smd Rgb 5050 Strip

48 LED RGB Knight Rider Scanner DRL Multi Color Flash Car Strobe 7 Color Universal Light Kit Strip 22 Inch

  • Content: 1Pc 22 Inch 48 LED 5050 SMD Chip RGB Strip with Module / Remote.
  • 7 Color Function with Flashing Color and Speed Control Functions.
  • Colors: Red Blue White Yellow Pink Purple Green and Mix Colors.
  • Water Resistant for Any Driving Conditions. Wireless Remote Range 60FT.
  • Stark Trusted 1 Year Warranty any defect will be replaced just contact us first!.
Check Stock

TRUECOLOR USB-Powered LED Light Bar – Easy to Install LED Light Bar with Frosted Cover, 3M Tape Included, Powered by Any USB Port – Lasts up to 100,000 Hours (White, 8\), 6000K Daylight, Bracket Kit

  • USB strip lights decorate your indoor space, such as dining room, kitchen, bedroom, tent, etc..
  • 24 Keys Remote with 16 Color Changing, dimmable 4 modes..
  • RGB SMD 5050, Super adhesive backing tape.
  • Each led strip lights have 60 lamp beads, and each led can be cut..
  • Led strip lights is 5V low voltage, energy saving and touchable, safe to use..
Check Stock

RGBZONE RGB LED Strip Controller, RF Wireless Wall-Mounted Touch Panel Dimmer Switch, DC 5-24V 30A RGB LED Strip Controller for 5050 3528 2835, Sensitive Touching (RGB)

  • RGB LED Strips Dimmer Switch: Compatible with most 5v-24v 30A RGB LED lights fixtures. Touch panel dimmer switch controller for RGB LED strips lighting. For SMD 5050 3528 RGB LED Strip Lights. Package includes: 1 x Touch switch panel, 1 x Iron shell controller, 2 x Double sided adhesive blocks..
  • Wall-Mounted Touch Panel Dimmer: Capacitive stable touch screen. High-end leading-edge LED dimmer with touch panel, smooth to touch. Control dimming ring, give a quick and easy way to control led strip light. Switch Type: Touch Switch. Mounting Type: Wall Mount..
  • Pulley Color Switch Key: Sensitive contacts on the panel for easy to adjust brightness and control dynamic modes for RGB led strip lights, such as fade, Fade + Flash, Strobe, Flash. Save user setting when power off..
  • Two installation methods: The panel provides two easy ways to Installation.1. Paste installation: Package Include 2pcs double -sided tape, Suitable for paste on a flat and smooth wall. Easy to install, remove and use. 2. Screw installation: You can also prepare the screws by yourself, the screw can be installed on the back of the panel. (The screw is not included in the packaging). Classic Ultra -thin panel, it is a perfect decorative wall switch..
  • RF Wireless Remote LED Controller: Wireless....
Check Stock

TATUFY LED Strip Lights,16.4FT/5M 300 LED Smart Led Lights Strip SMD5050 Music Sync Color Changing RGB Lights APP Bluetooth with 24 Keys Remote Controller for TV, Bedroom, Kitchen, Desk Decoration

  • 16.4FT Lights All in One Kit2020 new kit includes RGB led strip lights, IR remote controller with 24 keys, power adaptor and connectors. No other accessories are required. But please note here: please dont load it more than two strips. We suggest one power adapter for two strips.When the strip still on the spool, you want to test it, please be careful not to exceed 2 minutes, otherwise it will accumulate heat and cause the strip to overheat..
  • Colorful Lighting EffectThe LED strip lights can be set to automatically change color and speed periodically through the remote control. In the case of monochromatic light, the brightness of the light can be adjusted freely. In the mode of automatic light conversion, the pause button can select a color to stop the light changed. Led Strip Lights with 24 Key IR Remote Controller, provide RGB (red, green, blue), and also 16 multicolored options to DIY your favorite color to decorate your room..
  • Strongly Viscous & CuttableThe multi-color changing led strip lights can be cut every 3 LEDs along the cutting mark without damaging the rest strips.Due to the flexible material and strong double-sided tape strips can be easily placed on any clean, dry and flat surface with good adhesion such as paint, glass, plastic, metal, ....
Check Stock

Nelyeqwo 2 Pack 5M 16.4ft RGB Extension Cable LED Strip Connector 4 Pin Solderless Strip Jumper Cables Kit with 4 Pack 4 Male Pin Connector for 5050 3528 RGB LED Strip Light

  • High Quality: The LED strip light extension cable insulation made of PVC material, anti-corrosion, wire contains 4 strands of tin-plated pure copper, which is resistant to oxidation, flexible and tough, durable and longer life.
  • Easy to Install: Solderless, installation without tools, save time. Make sure arrow to arrow, plug and play.
  • Operating conditions: The RGB LED strip light connectors support maximum wattage of 72W , and 0-24v voltage input. Suitable for most families.
  • Function: The RGB extension cable can connect between IR/RF Controller and 5050/3528 LED strip light, extend strips to the ideal location. Or connect between 2 RGB LED strips, convenient and practical.
  • What You Get: Cost-effective, 2 x 5M 16.4ft RGB Extension Cable and 4 x 4 male pin connector for 10mm 5050/3528 RGB Waterproof and non-waterproof LED strip light.
Check Stock

LED Strip Solderless Connector Adaptor for 10mm Wide 5050 RGB Waterproof Led Strip Light 4 Pin RGB Strip Connector Pack of 10

  • Easy-clasp solderless connectors, only work for 10mm wide Waterproof (IP62/65 silicone or PU on the PCB surface, not for IP67, IP68 type) 5050 RGB LED....
  • Easy to use, no soldering required. Just clasp 10mm Waterproof RGB 5050 led strip section into the connector to get connected..
  • Please check the width of your LED strips, these connectors are not suitable for 8mm or other sizes of waterproof LED strip light..
  • Note: it is not recommended to connect the Non-waterproof led strips, because the Non-waterproof light strips are too thin and the connection is not....
  • Package Content: 10 pcs 4 Pin led strip lights connectors for waterproof (IP62/65) 10mm width RGB led strip..
Check Stock

5 Pin RGBW Led Connector Extension Wire with 5 Pin Conenctor, SIM&NAT 15 cm / 5.9 inch RGBW RGBWW Connector Plug Weld Line Male Female Plug Cable for SMD 5050 Led Strip

  • 5 Pin RGBW RGBWW female connector Plug Cord with bare wire terminal, ideal for soldering.
  • Length of RGBW extension Cable: 5.9 inch / 15cm.
  • RGBW / RGBWW Extension Cable for 5050 SMD RGB Warm White led strip light.
  • Can be welded to RGBW / RGBWW led strip light..
  • Package content: 10* 5 pin Female Connector Cord, 10* 5 Pin male Plug Connector.
Check Stock

Qiuko RGB Multi-color LED Angel Eye Light Halo Ring Demon KIT Headlight For Dodge Challenger 2008-2014 2021

  • Made with high quality 3-Emitter 5050 RGB SMD LED lights.
  • 4 pieces LED Rings, in total 120 pieces 5050 SMD LED lights.
  • Comes with newly upgraded Radio Frequency remote control with 60 ft range.
  • 7 Colors includes Red/Green/Blue/Amber/Magenta/Cyan/White.
  • All necessary brackets and clips are included.
Check Stock

Led Strip Lights,WLtoeoo 32.8ft Flexible Color Changing Led Lights,RGB Led Wall Lights with Remote 44 Key, DIY Colors, Led Lights Strip for Bedroom,Kitchen, Party Halloween Christmas Decoration

  • Halloween Decorations Multicolor Changing & DIY:This led strip light, with 20 basic colors, 6 diy colors, and 8 light modes by 44-key remote.The color changing Led lights are long enough to place anywhere you want in your house and add a snazzy touch..
  • Easy Installation:Simply attach the Led wall lights to a clean, dry surface using the adhesive. It is recommended that fixing clips be used on the head, tail and bends of the LED strip to ensure that RGB LED lights bars are firmly fixed..
  • Customize Your Lighting:This Led lights strip has 300 5050 SMD RGB Leds in 32.8ft with dimmer and brightness controls. You can adjust the light brightness. It can be used for decorating bedroom, TV backlight, kitchen, living room, desk, stairs, bar..
  • Wide Application: Led lights strip for bedroom, working voltage 12V, low heat, touchable.You can cut every 3 LEDs along the cutting marks without damaging the rest strips.It is a great DIY decoration gift for home decoration, bar or party..
  • What’s In Your Order: Fully equipped accessories, it comes with 2 reel of 16.4 feet led light strip, an ac power adapter, an ir remote control, a controller box, instruction manual.
  • please read the User Manual carefully before using..
Check Stock

5050 4Pin LED Strip Connector Kit with 2 Way RGB Splitter Cable, 2X Strip to RGB Controller Jumper, 2X LED Strip to Strip Jumper, 5X Cuttable L Shape PCB, 10x Gapless Connectors, 20x LED Strip Clips

  • Hassle Free: 24 months return policy for all iCreating 5050 4Pin LED strip connector kit, 90 days full refund policy, 24 hours online customer service.
  • Package Includes: 1x 2 way RGB splitter cable, 2x strip to RGB controller jumper, 2x LED strip to strip jumper with wire, 5x Cuttable L Shape PCB, 10x gapless connectors, 20x LED Strip Clips, 10x 4 Pin Male Connector, 2x Pry opening tool.
  • Application: 10mm 4 wire LED light strip connector kit for waterproof and non-waterproof 5050 RGB Color Changing LED strip lights.
  • Operating Condition: These LED tape connectors support 0-4A current and 0-24V voltage input, heat resistance level from -20 ~ 100 degree.
  • Note: When connecting waterproof LED strip lights with these LED strip connectors, silicon gel on the surface of soldering area must be peeled off.
Check Stock