Best Smooth Bore Cylinder Tube

NEW WILWOOD GO KART BRAKE SET WITH CALIPER PADS MASTER CYLINDER & LINE KIT FOR 1/8 ROTORS GREAT FOR KARTING JR DRAGSTER ETC SOUTHWEST SPEED

  • Wilwood Karting Kit with Brake Caliper & Pads, Master Cylinder, 5' of Nylon Line, & 90 Degree Fitting to use with Caliper if necessary. (Wilwood Part #120-5498, #260-5520, #928-503, & #928-560)..
  • Wilwood Karting Kit with Brake Caliper & Pads, Master Cylinder, 5' of Nylon Line, & 90 Degree Fitting to use with Caliper if necessary. (Wilwood Part #120-5498, #260-5520, #928-503, & #928-560). Kit Includes: Wilwood Go-Kart Caliper for .125" Rotors Fits 0.125" Thick rotors Features Two 1.00" Pistons Weighs only 1.2 lbs. Comes with high friction brake pads..
  • Wilwood Go-Kart Master Cylinder with a 1/2" Bore 1/2" Bore Weighs only .55 lbs. This super lightweight aluminum master cylinder designed specifically for kart & jr. dragster racing applications incorporates an adjustable lever ratio with a remote mount clear fluid reservoir for easy monitoring The assembly comes ready to install and includes billet bracket, lock-wired drilled hardware, & fluid line fitting ..
  • 5 Feet of -3 Nylon Brake Line 3/16" Nylon tubing 5' Should equip most karts with some left-over..
  • 90 Degree Fitting for Caliper Depending on how everything is mounted, the line might run to the caliper at a bad angle for the straight fitting. This 90 degree fitting instal....
Check Stock

Can Crusher, Pneumatic Cylinder Can Crusher for Soda Beer Eco-friendly Recycling Tool (Silver)

  • Robust cylinder and metal frame for any aluminum can crushing.
  • Plug and Play air fitting for you to connect to your compressor, easy to operate.
  • 90 to 120 PSI working pressure to crush all kinds aluminum can.
  • Bore ID of Cylinder: 2.48 inch Stroke of Cylinder:7.9 inch.
Check Stock

SLAIR Can Crusher, Pneumatic Cylinder Can Crusher for Soda Beer Eco-friendly Recycling Tool (Black)

  • Robust cylinder and metal frame for any aluminum can crushing.
  • Plug and Play air fitting for you to connect to your compressor, easy to operate.
  • 90 to 120 PSI working pressure to crush all kinds aluminum can.
  • Bore ID of Cylinder: 2.48 inch Stroke of Cylinder:7.9 inch.
Check Stock

YOTOO Engine Cylinder Hone Deglazer Adjustable 1-1/4\ to 3-1/2\ Diameter with 3-Piece 2\ Long Stones 220 Grit

  • Engine cylinder hone for deglazing engine cylinders 1-1/4" to 3-1/2" in diameter.
  • Flexible shaft for easy use and self centering.
  • Knurled wheel adjusts spring pressure of stones against cylinder bore.
  • Cylinder Hone features 3 replaceable 2-Inch long 220 grit stones.
  • WARRANTY&SUPPORT: One year warranty. Any problem, please feel free to contact us..
Check Stock

Air Cylinder Can Crusher Heavy Duty Efficient Soda Beer Smasher, Eco-Friendly Recycling Tool for Aluminum Cans… (Manual Button Valve)

  • Strengthful air cylinder to smash all kinds of aluminum cans easily..
  • Cylinder Stroke: 7.9 Inch(200mm). Provide sufficient force to crush the cans..
  • Sturdy & Durable: Metal material for the Frame and Piston, Coating and Oxidizing surface treatment for corrosion resistance..
  • Safety: The flush press valve is used to activate the cylinder to prevent damage to kids..
  • Application: Maximum Can to be crushed: OD 2.8 inch, Height 7 inch..
Check Stock

6 Pcs 5/16\ to 6\ Telescopic Gauge Bore Gauge Telescoping Gage Set High Precision T Bore Hole Gauge Bore Measurement Tool

  • 【Easy to Adjust】This telescopic bore gauge set allow the most pinhole gauge on the retractable gauge to enter, can quick check holes, slots and recess up to 6" deep..
  • 【Bore Gauge Material】 The bore gauges are made of carbon steel with chrome plating on the surface.Telescoping Gage Set has nickel-plated finished and good side arc so that the product has a long service life..
  • 【Bore Gage Packing】Total 6Pcs cylinder bore gauges in a ethylene plastic bag, range: 5/16" - 6" (8mm to 150mm), (1 gage: 5/16 - 1/2" range x 4.20" overall.
  • 1 gage: 1/2 - 3/4" range x 4.40" overall.
  • 1 gage: 3/4 - 1-1/4" range x 4.40" overall.
  • 1 gage: 1-1/4 - 2-1/8" range x 5.85" overall.
  • 1 gage: 2-1/8 - 3-1/2" range x 5.85" overall.
  • 1 gage: 3-1/2 - 6" range x 5.85" overall)..
  • 【Peration Method】 Use the small hole gauge to expand in the hole to be measured, lock it in place, and then take it down, and measure with bore micrometer or caliper to determine the final hole size..
  • 【Unique Design】 The spring tension of bore measuring tool ​gives uniform contact pressure, can detect the inner diameter in a hole (or groove).Spring of telescopic gauge loads with knurled locking knob and knurled holding area..
Check Stock

YOTOO 2-Piece Engine Cylinder Hone Set Deglazer Adjustable 1-1/4\ to 3-1/2\ and 3/4\ to 2-1/2\ Diameter with Stones 220 Grit

  • Engine cylinder hone for deglazing engine cylinders 3/4" to 2-1/2" and 1-1/4"-3-1/2" in diameter. 2-Piece Packed.
  • Flexible shaft for easy use and self centering.
  • Knurled wheel adjusts spring pressure of stones against cylinder bore.
  • 1-1/4" to 3-1/2" cylinder hone features 3 replaceable 2-Inch long 220 grit stones. 3/4" to 2-1/2" cylinder hone features 3 replaceable 1-1/8-Inch long 220 grit stones.
  • WARRANTY&SUPPORT: One year warranty. Any problem, please feel free to contact us..
Check Stock

YOTOO Engine Cylinder Hone Tool Adjustable Deglazer 2\-7\ Diameter with 3-Piece 4\ Long Stones 220 Grit Kit

  • Engine cylinder hone for deglazing engine cylinders 2-Inch to 7-Inch in diameter.
  • Durable flexible shaft for easy use and self centering.
  • Knurled wheel adjusts spring pressure of stones against cylinder bore.
  • Cylinder Hone features 3 replaceable 4-Inch long 220 grit stones. And includes additional 3-Piece replacement stones for long time use..
  • WARRANTY&SUPPORT: One year warranty. Any problem, please feel free to contact us..
Check Stock

LAUNCH CNC-603A Ultrasonic Fuel Injector Cleaner and Tester 110V Automotive Fuel Injection Systems Cleaning Machine for All Petrol 6 Cylinder [Update of LAUNCH CNC602A]

  • ...ent, only LAUNCH TECH produces this portable and multi-functional automobile fuel injector cleaning and testing machine, and it has obtained a special patent..
  • [Why Need It]: Due to the fuel quality, the injector cannot work normally, causing serious carbon deposits in the cylinder, accelerating the cylinder bore and piston ring, causing unstable idling, increased fuel consumption, weak acceleration, difficulty in starting, excessive emissions, and complete blockage of the injector, cause damage to the engine, so the injector should be cleaned regularly..
  • [Easy to Operate]: When cleaning or testing, fix the car injector in the socket of the washing tank, add an appropriate amount of cleaning fluid, and the cleaning can be completed after power on.
  • when testing, fix the car injector in the oil separator and add it to the glass tube industrial alcohol, the test or clean can be completed after power on..
  • [Safety Guarantee]: Its working voltage range is 110V. When the machine is short-circuited, the fuse inside will automatically trip to shut down the running machine to prevent electric shock..
Check Stock

Cylinder Piston Gasket Set Fits Yamaha Blaster 200 YFS200 1988-2006

  • Bore 66.00 mm x Stroke 57.00mm / Cylinder Displacement is 195cc / Compression 6.6:1.
  • This product includes Piston Kit, Gasket Kit, OE Type Cylinder.
  • THIS ITEM HAS TO BE INSTALLED BY PROFESSIONAL MECHANICS SPECIALIZED IN ATV AND UTVs.
Check Stock