Best Snap in Conduit Clamps

Whirlpool 4396010RP 6-Feet Dryer Secure Connect Vent

  • Standard 4-Inch diameter clamps needed for attachment to standard fittings.
  • Snap two or more pieces together to obtain needed lengths.
  • Metal, crush resistant, flexible dryer venting.
Check Stock

Leviton 42777-1WA Surface Mount Backbox, Single Gang, White, Box Depth Is 1.89 Inches

  • For use with conduitDescriptionThomas & Betts 583611/2-30 Single Gang Utility BoxThomas & Betts 583611/2-30 Single Gang Utility Box Features:Three 1/2" each side conduit knockoutsOne 1/2" each end conduit knockoutsTwo 1/2" bottom conduit knockoutsFactory provided raised ground screw locationSteel13.0 cubic inch capacity1-7/8" deep with conduit knockouts.
Check Stock

Rectorseal 55996 Quart Gray Pvc Conduit 633L Low Voc Pvc Solvent Cement

  • PVC Electrical Conduit Cement 633L is specially formulated for use on PVC conduit Types I and II.
  • It is a medium body cement in clear or gray to match conduit color.
  • Medium fast setting allows corrections before setting up.
Check Stock

AMZCNC 8 Ton 1/2 Inch to 2 Inch Hydraulic Knockout Punch Driver Tool Kit with 6 Dies Hole Complete Tool Electrical Conduit Hole Cutter Set (8T（1/2"~2"）)

  • Labor-Saving & Hydraulic 10T: It is a knockout punch set with a separable hydraulic pump. The maximum crimping power is 10 T. It features a good tightness and no oil leakage..
  • Durable Dies & Punches Set:Actual hole diameter is 0.89" for ½" conduit. Actual hole diameter is 1.11" for ¾" conduit. Actual hole diameter is 1.36" for 1" conduit. Actual hole diameter is 1.7" for 1¼" conduit. Actual hole diameter is 1.95" for 1½" conduit. Actual hole diameter is 2.42" for 2" conduit fully meeting your needs. Two draw bolts are solid and built to last. Max thickness for steel: 1/8".
  • Max thickness for stainless steel: 1/16"..
  • Convenient Operation: The knockout set is fast and easy to operate. With the excellent cooperation of a drill bit and a driving bolt, you can easily get a clean and uniform hole. And the long plastic handle ensures zero sliding and effective force transfer, improving work efficiency..
  • Portable Carrying Case: The stud punch tool is stored in a durable plastic toolbox that is not easily broken, saving space. It is compact, light-weigh....
Check Stock

Flexible PVC Non Metallic UL Liquid Tight Electrical Conduit Kit with 2 Straight and 2 Angle Fittings Included (1/2\ Dia. x 50 ft)

  • Non Metallic Flexible Liquid Tight Conduit with 2 Free Straight and 2 Free Angle Fittings.
  • Conduit is Flexible - Can be used in extremely Tight Quarters, Light Weight - Lower Installed Costs.
  • Liquid Tight Conduit Resists Corrosion, Oil and Water, Smooth Inside for Easier Wire Pulling, Resists Crushing and Stretching,Outdoor Sunlight Resistant.
  • These Non-Metallic connectors are molded of Type Nylon 6, O Ring and Steel Lock-nut included, for Indoor and outdoor use.
  • No Threading of Conduit Required to Install, No Disassembly Required (Just Push Tubing onto Fitting).
Check Stock

(2\ Dia x 50 ft) HydroMaxx® Flexible PVC Non Metallic UL Liquid Tight Electrical Conduit Kit with 2 Straight and 2 Angle Fittings Included

  • Non Metallic Flexible Liquid Tight Conduit with 2 Free Straight and 2 Free Angle Fittings.
  • Conduit is Flexible - Can be used in extremely Tight Quarters, Light Weight - Lower Installed Costs.
  • Liquid Tight Conduit Resists Corrosion, Oil and Water, Smooth Inside for Easier Wire Pulling, Resists Crushing and Stretching,Outdoor Sunlight Resistant.
  • These Non-Metallic connectors are molded of Type Nylon 6, O Ring and Steel Lock-nut included, for Indoor and outdoor use.
  • No Threading of Conduit Required to Install, No Disassembly Required (Just Push Tubing onto Fitting).
Check Stock

(1\ Dia x 50 ft) HydroMaxx® Flexible PVC Non Metallic UL Liquid Tight Electrical Conduit Kit with 2 Straight and 2 Angle Fittings Included

  • Non Metallic Flexible Liquid Tight Conduit with 2 Free Straight and 2 Free Angle Fittings.
  • Conduit is Flexible - Can be used in extremely Tight Quarters, Light Weight - Lower Installed Costs.
  • Liquid Tight Conduit Resists Corrosion, Oil and Water, Smooth Inside for Easier Wire Pulling, Resists Crushing and Stretching,Outdoor Sunlight Resistant.
  • These Non-Metallic connectors are molded of Type Nylon 6, O Ring and Steel Lock-nut included, for Indoor and outdoor use.
  • No Threading of Conduit Required to Install, No Disassembly Required (Just Push Tubing onto Fitting).
Check Stock

Southwire - 63029840 Tools & Equipment FTSP45-75NCT Simpull Electrical Fish Tape with Non-Conductive Tip, Large Case, 4.5mm x 75 Feet

  • Works great in either filled or empty conduit.
  • TWO LEADER OPTIONS: comes with either a 360° swiveling flexible metal leader (580 lb. strength) or a non-conductive glow in the dark leader (380 lb. strength).
  • FASTER, EASIER PULLS: low friction design allows the tape to easily glide through the conduit without binding at turns, joints or couplings.
  • SPIRAL EXTRUDED POLYMER design does not rust and reduces the amount of effort required to push or pull the fish tape through EMT, IMC, rigid, or PVC conduit.
  • EXTREMELY FLEXIBLE: Combining the strength of steel fish tape with greater -flexibility than fiberglass fish tapes, this fish tape will not break when folded.
Check Stock

Southwire FTSP45-125NCT Simpull Electrical Fish Tape with Non-Conductive Tip, Large Case, Two Leader Options, Spiral Extruded Polymer, Extremely Flexible, 4.5mm x 125 Feet

  • Works great in either filled or empty conduit.
  • TWO LEADER OPTIONS: comes with either a 360 swiveling flexible metal leader (580 lb. strength) or a non-conductive glow in the dark leader (380 lb. strength).
  • FASTER, EASIER PULLS: low friction design allows the tape to easily glide through the conduit without binding at turns, joints or couplings.
  • SPIRAL EXTRUDED POLYMER design does not rust and reduces the amount of effort required to push or pull the fish tape through EMT, IMC, rigid, or PVC conduit.EXTREMELY FLEXIBLE: Combining the strength of steel fish tape with greater -flexibility than fiberglass fish tapes, this fish tape will not break when folded..
Check Stock

Klein Tools 85091 Power Conduit Reamer with Improved Bit Retention, 1/2-, 3/4- and 1-Inch

  • Power Conduit Reamer reams 1/2-Inch (13 mm), 3/4-Inch (19 mm) and 1-Inch (25 mm) conduit and install fittings in a fraction of the time.
  • Reduce time on projects with large quantities of conduit runs.
  • Designed to fit into power drill chucks and quick release adapters with improved bit retention.
  • Includes precision engineered replaceable reaming blade.
  • Replacement blades (SKU #19353) are available and the only approved blade for use in our tool.
  • Designed to be used on Electrical Metallic Tubing (EMT).
Check Stock