Best Socket Welding Fitting

uxcell 17pcs DIP IC Chip Socket Adaptor Round 28 Pin 2.54mm Pitch Dual Row 15.24mm Row Pitch

  • Row to Row Distance(Approx):15.24mm/ 0.6".
  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock

RX WELD Argon CO2 Regulators Gauges Gas Welding Regulator cutting Regulator CGA580 With 6.6Ft Gas Hose

  • 1.VERSATILE APPLICATIONS FOR CGA-580 Tanks: This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet).
  • 2.Features: 2" dual-gauges for easy reading..
  • 3.Safe Design: Accurate measurement of gas. Internal safety pressure relief design..
  • 4.Specifiction:Brass regulator body,CGA580 fitting, FEMALE 5/8" Outlet.
  • 5.Hose Included: RX WELD 6.6Ft Hose Quick Connect Fitting enable your tanks at a safe distance from your welding projects.Plastic adjustment knob for smooth "easy touch" flow settings..
Check Stock

POHIR Pressure Washer Adapter Set Quick Connect Kit,M22 14mm X 3/8 Male Plug Female Socket Brass Pressure Washer Quick Connect Fittings Quick Coupler for Pressure Washer Gun or Hose

  • ♛【Quick Connect Kit for Pressure Washer】:1 coupler M22 14mm female + 3/8 inch male plug, 1 coupler M22 14mm female + 3/8 inch female socket,....
  • ♛【Universal Pressure Washer Adapter】 : Fittings apply on universal gun, hose and pump connection. Use for most brands of pressure washeres.....
  • ♛【M22 to 3/8 Quick Connect】:2 pcs quick disconnect kit, can quickly connect & disconnect water outlet of pump to pressure washer hose or connect....
  • ♛【General Pressure Washer Adapter Accessories】:M22 14mm fitting 3/8 inch male plug female socket is compatible, M22 14mm female thread to M22....
  • ♛【Great Gift for Car Wash】:Quick disconnect plug high pressure brass fitting quick coupler, fits perfectly with power washer, pressure washer....
Check Stock

Wideskall® 2\ x 1\ inch Heavy Duty Malleable C Clamp (Pack of 10)

  • Versatile clamp secures parts for assembly, fastening, gluing, and welding.
  • Cast malleable iron frame with I-beam design provides sure strength.
  • Chrome plated Acme-threaded screw glides smoothly without sticking or binding.
  • Swivel jaw pad floats in a low-resistance ball-and-socket joint to apply pressure evenly.
  • Sliding handle bar offers multiple hand positions for best leverage.
Check Stock

Tillman 1414 Unlined Drivers X-Large Gloves, 12 pairs

  • This pair of welding gloves is made from premium split cow leather from Italy. The soft, supple, top-grain leather offers comfort and pliability. The gloves are form-fitting, which increases comfort and safety. The liner of the glove is soft and comfortable. The inside will not slip when wet with sweat. Custom colors and sizes can be requested..
  • These gloves reduce your risk of burns or scratches from coming into contact with hot coals or embers, grinding debris, and sharp objects. This product is suitable for welding, gardening, construction, and other heavy-duty activities. Heat resistant..
  • MULTI-PURPOSE GLOVES: Unibody cow split leather back till the cuff. Use large pieces of cowhide, as few seams as possible, and a simple and more reliable structure. Not only for welding, protection against rough objects, heat, sparks, and flames, but also useful for any other work and home tasks, Such as grill, barbecue, stove, oven, fireplace, cooking, pruning flowers, gardening, camping, campfire, etc.
  • SUPERIOR LEATHER & COTTON INNER - Made of premium cowhide split leather, a double-layer of reinforcement on the fingers, palms, and back of hand areas with a thumb wing for excellent protection, these will help you to reliably and safely handle heat operations....
Check Stock

uxcell 20pcs DIP IC Chip Socket Adaptor Solder Type 2.54mm Pitch Dual Row 8 Flat Pin 7.6mm Row Pitch

  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock

KSP Rear Lowering Shackle Kit 1 -2 Adjustable Solid Steel Drop kit for Silverado 1500 1999-2019 2WD 4WD 4x4 6-Lug

  • 【Fitment】The adjustable shackle kits will drop 1" to 2" for 1999-2019 Silverado 1500 2WD 4WD (6-Lug only). If you want to buy the shackle for your....
  • 【Solid Quality】Replaceable and greaseable polyurethane bushings for driving performance and longer service life;TIG welding supply better....
  • 【Tapped Zerk Fitting Holes】The holes for zerk fittings are tapped/threaded for more firm and the zerk will not to fall off. Please note that....
  • 【Easy Installation】The install is pretty straight forward and no welding is required. According to different years of Silverdo 1500, lowering kits....
  • 【Sincere Service 】Include 2x Rear Lowering Shackles, 2x grease zerks,Pro Installation Instructions. We offer “30-day refund, 24-month free....
Check Stock

TOOLIOM 200M MIG Welder 3 in 1 Flux MIG/Solid Wire/Lift TIG/Stick Welder 110 / 220V Dual Voltage Welding Machine

  • Synergic Control: The welding parameter is built-in with precise data. It will choose the voltage, amperage and feeding speed that is needed based on welder data, making it much easier for new welders..
  • Multi-functions in one machine: Suitable for MMA, Lift TIG, flux MIG, gas MIG.
  • Powerful Machine: Up to 200A output current that can weld mild up to 5/32 inch (4.0mm) plate..
  • Big enough to apply to 2 and 10 pounds rolls of wire. Ready to feed .030"(0.8mm) with solid core wire, and .035" (0.9mm)with flux core wire.Can Handle E7018 basic electrode..
  • Dual voltage input design: Welding machine can be plugged into 110(120)V / 220(230)V dual voltage (Automatic fitting)..
Check Stock

SPARC Inert Gas 5/\8-18RH Flare to 1/8\ NPT Welding Hose - 12FT

  • QUALITY ✔ Premium 12FT Rubber Hose - 200psi working pressure, 800psi burst pressure. Great for when your bottle or dewar is far away!.
  • CONNECT ✔ Crimped 5/"8 UNF-18RH inert gas fitting on one end, 1/8" NPT male on the other. Brass material. This hose will thread into most Miller, Lincoln, ESAB, Harbor Freight, and many more welders with a standard inert gas fitting..
  • COMPATIBLE ✔ with argon, CO2, helium and any other welding gases.
  • GREAT FOR ✔ our flowmeters SP00005 and SP00006.
  • WE'VE GOT YOUR BACK ✔ Backed by our rock-solid 1 year warranty against manufacturing defects. We are based out of Denver, CO and offer customer service and support via phone, text, and e-mail..
Check Stock

RX WELD Argon Mig Tig Flow Meter Gas Regulator Gauge with Gas Hose Welding Weld

  • 1.VERSATILE APPLICATIONS FOR CGA-580 Tanks: This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet).
  • 2.Accurate Gas Flow Gague:Adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube..
  • 3.RELIABLE QUALITY - Our argon flow meter's body is made of high-quality brass, which can withstand harsh environments..
  • 4.OUTPUT:Will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting..
  • 5.Hose Included: RX WELD 6.6Ft Hose Quick Connect Fitting enable your tanks at a safe distance from your welding projects..
Check Stock