Best Socket Welding Flange

TEKTON 1 Inch Malleable Iron C-Clamp | 4009

  • Versatile clamp secures parts for assembly, fastening, gluing, and welding in woodworking, metalworking, and automotive applications.
  • Cast malleable iron frame with I-beam design provides sure strength.
  • Acme-threaded screw glides smoothly without sticking or binding.
  • Swivel jaw pad floats in a low-resistance ball-and-socket joint to apply pressure evenly.
  • Sliding handle bar offers multiple hand positions for best leverage.
Check Stock

USB Female Type-B Port 4-Pin Right Angle PCB DIP Jack Socket-White 10 Pack by MUZHI

  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock

uxcell 17pcs DIP IC Chip Socket Adaptor Round 28 Pin 2.54mm Pitch Dual Row 15.24mm Row Pitch

  • Row to Row Distance(Approx):15.24mm/ 0.6".
  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock

Wideskall® 2\ x 1\ inch Heavy Duty Malleable C Clamp (Pack of 10)

  • Versatile clamp secures parts for assembly, fastening, gluing, and welding.
  • Cast malleable iron frame with I-beam design provides sure strength.
  • Chrome plated Acme-threaded screw glides smoothly without sticking or binding.
  • Swivel jaw pad floats in a low-resistance ball-and-socket joint to apply pressure evenly.
  • Sliding handle bar offers multiple hand positions for best leverage.
Check Stock

53pcs Cable Clamps Assortment Kit, 304 Stainless Steel Rubber Cushion Pipe Clamps in 6 Sizes 1/2'' 1'' 1.25'' 1.5'' 1.75'' 2''

  • The New Pipe Alignment Clamp with Quick-Acting Screw is a fast, accurate fit-up clamp with a rugged frame for use in the shop, or at the job site..
  • Get a well-balanced hold on the Pipe Alignment Clamp with the two wide Grip Plates while pressing the Quick-Acting Button. The threaded screw smoothly glides up and down for fast jaw opening and clamp removal after welding..
  • The long life clamp is made of double-walled powder coated steel. Align pipe for joining pipe to elbow, pipe to tee, or pipe to flange..
Check Stock

uxcell 20pcs DIP IC Chip Socket Adaptor Solder Type 2.54mm Pitch Dual Row 8 Flat Pin 7.6mm Row Pitch

  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock

8020 3320 15 Series Bolt Assembly 5/16-18 x 0.687 Flanged Button Head Socket Cap Screw FBHSCS with Slide-in Economy T-Nut T-Slot Hardware Fasteners Combo 100 Pack

  • Includes 100pcs of 3330 - 5/16-18 x 0.687 11/16 inch flanged button head socket cap screw and 100pcs of 3278 - 5/16-18 slide-in economy t-nut offset thread..
  • Both the flanged button head socket cap screw and economy t-nut is made out of steel with a black zinc finish..
  • The bolts comes with a 0.66 inch diameter flange head and full thread length of 0.687 inch with a 3/16 allen hex drive. Thread size is 5/16-18..
  • The hardware nuts measure .638 x .222 x .984 inches long with an offset 5/16-18 thread. Works perfectly with 15 Series 80/20 aluminum extrusions..
  • Used to mount your brackets or plates to the t slot track of the 15 Series or standard 1.5" based aluminum extrusion. Perfect for any DIY machinist!.
Check Stock

Honeywell V5011N2089 1 2\ 2-Way F-NPT Globe Valve

  • Class 800 inline globe valve with non-rising stem and bolted bonnet for on/off actuation and flow control (throttling) in a pipeline.
  • Carbon steel valve body for tensile strength and hardness.
  • Bolted bonnet for tight assembly and reduced risk of leakage.
  • Socket-weld ends for welding to unthreaded pipes.
  • Maximum working pressure of 200 pounds per square inch (psi).
Check Stock

B&W Trailer Hitches 1067 Chevrolet and GMC Gooseneck Hitch

  • Fits: 2001-2010 Chevrolet and GMC 3/4 Ton HD Long and Short Bed Trucks.
  • Fits: 2007-2010 Chevrolet and GMC 1 Ton (1 bed crossmember over the axle).
  • Bolts to existing holes in the frame with no drilling or welding.
  • solid, one-piece machined receiver socket.
  • Flexible latch pin handle attached to a spring loaded, 5/8" steel locking pin that goes completely through the ball.
Check Stock

VELLEDQ Field Assembly Sensor/Actuator Panel Mount Connector M12 5-Pin Male A-Coding Rear Flange Joint

  • Connector locking system: M12, Panel locking system: M16, Coding: A-coding interface, Contacts: 5 pins layout, Gender: Male, EMV compliance: Unshielding, Type: Rear flange panel mount..
  • Core material: Cu(Gold)+Zn, Core diameter: 26AWG / 0.25mm², Crimp range: 0.14-0.75mm², Termination: Welding, Tightening torque: 0.4Nm, Shell Meterial: Metal, Sealing: O-ring..
  • Rated voltage: 125V AC/DC, Current per contact ( 40 °C ): Max 4A, Volume resistivity: ≤3mΩ, Ambient temperature: -20℃~+80℃, Mehcanical operation: 003e100 mating cycles..
  • Standard: IEC 61076-2-101, Flame Retardant Rating: UL94-HB, IP Rating: IP67, Certification: CE / ISO 9001..
  • Perfect for the application on automated terminal connection, process control, and commercial electronic, can be easily connected to proximity switches, photoelectric barriers, flow monitoring devices, sensor devices and ctuator devices and field bus components..
Check Stock