LDEXIN 3\ / 75mm Cutting Dia. Tungsten Carbide Hole Saw Heavy Duty Thick Metal Sheet Wood Steel Cutter Drill Bits
❤3" / 75mm Hole Cutters, The gears is made from tungsten carbide steel,specially used on metal and steel plate, with carbide tipped teeth for extra long lifespan..
❤The optimized tooth design allows for fast drilling speed, and also offers an optimized pilot bit for long life in metal.
❤It has an ejection spring for easy plug ejection, along with a raised shoulder helps prevent break through. Come with a hex wrench, make your job more convenient and easier.
❤Suitable For Pistol Drill, Bench Drill,Vertical Drilling Machine Etc.Widely Used In Plate Hole, Home Wood, Galvanized Pipe, Fire Pipe, Plastic, Gypsum Board And Other Opening Operation.
HLOFIZI 2-1/2 Inch Carbide Grit Hole Saw Diameter 2.5\ Cutting Through Stucco, Brick, Plaster, Cement Board, Drywall, Hardie Board, Hardwood, PVC with 1-1/2\ Depth, Up to 6X Faster
2.5” hole saw constructed with long-lasting tungsten carbide grit edge, easy and fast cuts thick wood, plaster stucco ceiling & wall. Cutting depth 1-1/2 inch.
Drilling holes through lots of abrasive materials, stucco, old plaster, drywall, hard wood, plywood, sheetrock, cement board, plastic, PVC.
Clean and smooth cutting, slot for easy plug removal. Comes with arbor and carbide-tipped pilot drills. Arbor: 7/16" shank, fit 1/2" chuck.
Not recommended for cutting metal sheet, concrete block, cement tile.
100% SATISFACTION GURANTEED: If you are dissatisfied with our 2-1/2” carbide hole saw for any reason, return your order within 90-Days for full refund, we will always go above and beyond to ensure you are happy with your customer experience. We appreciate all your remarks and comments. They are the key tools to develop and improve our hole saw.
Recessed Light 6-3/8 Inch Carbide Hole Saw Cutter with Extra Gift for 6” Light Cutting Drywall, Ceiling Tile, PLG2SUPT
This recessed light Carbide grit hole saw cutter Install kit includes: 1 of 6-3/8" 162mm hole saw bit(Black or Red), 1 of 0.43”(11mm) hex shank arbor, 2 of 3.5"(89mm) pilot HSS drill bits. Extra 8 of 1” CrV Screwdriver bits,1 of Magnetic bit holder, 1 of 3M tape measure..
This recessed light carbide grit hole saw bit kit is your ideal choice For 6” recessed light with electric tool, cutting through abrasive materials, Wood, Drywall, Wood & Plaster, Corn Hole Board, Hardie Board, Acoustical Tile, Ceiling Tile . Max cutting depth: 1” (25mm)..
The carbide grit hardness over 70HRC.It is more hard, sharp . It’s a longer life in abrasive material..
The specially designing edge cuts more clean ,smooth . It is more fast than tradition bi-metal hole saw up to 80%. The specially designing back removes the plug easily. It’s fast than bi-metal hole saw 2 times..
Can not cut the wood with nail. Be Careful: Look for Hidden electrical circuits before your drilling..
ACTOOL 1-1/4\ Diameter × 2\ Depth of Cut HSS ANNULAR Cutter with 3/4'' Weldon Shank
CARBIDE TIPPED CUTTER- Premium carbide is brazed for superior strength, durability and wear resistance. 1-15/16’’ Diameter x 2’’ Depth of Cut annular cutter include free Pilot Pin..
EFFICIENT & PRECISE- Cut holes in steel quickly, precisely and safely. It can cut holes in steel up to 10X faster than standard twist drill bits..
EXCELLETN DESIGN- Triple-Cut geometry provide efficient cutting, fast feed rate, less vibration, smooth hole surface and long tool life..
WIDELY USE- For smooth and easy cutting almost all types of steel, including materials that are extremely difficult to cut such as stainless steel, titanium, hardened steel and rail steel..
UNIVERSAL FIT- 3/4" Weldon shank with 2 flats - fits most major brands of magnetic drills, can also be used with machine tools such as mills and large drill presses with tool holders..
Vipbhtool 1/4 Inch Shank Spiral Flush-Trim Router Bits Milling Spiral Flush Trim Bit Router Bits Pattern Bit Solid Carbide Flush Trim CNC Down Cut Spiral Router Bits
1/4 Inch Spiral Flush Trim Router Bits. Shank: 1/4 inch.
Spiral Flush-Trim Router Bits Solid Carbide Flush Trim Router Bit 1/4-Inch Shank Spiral Flush Trim Down Cut. The design down-cut sharp flutes would eject chips more quickly from the routing materials..
Can be used with handheld, table-mounted and CNC routers. Flush trim all types of material for a perfect finish. Cut half-round grooves for fluted moldings, columns, millwork and signs using a core box bit. The bit features high quality carbide for more efficient material removal. Each bit is manufactured from high quality steel for added durability and long life..
Made of Solid Carbide, Premium C3 micro-grain solid tungsten carbide for a high-performance industrial quality tool, provide precise, efficient cuts and offers extreme durability. Precison finish and micro-grain carbide could assure of good performance and long tool life..
Our Down Cut Spiral Router Bits Redesigned with permanent bearing retaining collar to reduce trimming mishaps. For use with soft & hard woods, ply-woods, composites, laminates, plastics and some non-ferrous metals. Perfect for edging, trimming, veining and grooving in all woodworking projects for both professional carpenters and hobbyists..
Hilitchi 300Pcs Brass Knurled Nuts Threaded Heat Embedment Nut for Printing 3D Printer and More Projects (Assortment Kit)
... sizes for your choice to meet all your needs. Assortment kit or one specific size, we have it all. Smooth surface with no burr, standard circular, firm and uniform, easy to install..
✅【STRANDARD AND COMPLETE THREAD】Deep thread, neat and clean, not easy to strip during rotation, stable and reliable. No need to counterbore or countersink the boss hole because the insert has guide pilot..
✅【A MUST HAVE】These heat set inserts can be widely used on the injection moulding for tightly fixing. Can be installed by ultrasonic or heat into thread tapered hole, or molded in during injection. Also apply to circuit board assembly and in the field of electronics. The plastic is formed around the brass insert. It would be better to put something in the threads to keep plastic from melting into the center. Using a normal soldering iron, you could easily set them into 3D printed holes..
✅【QUALITY AFTER-SALE SERVICE】If you do not satisfy with our products or if you have any questions, please come to us for help. We would work out a satisfactory solution to your problem. 12 hours response service!.
QWORK Twin Blade Adjustable Hole Saw - Cutter with ABS Dust Shield for Recessed Lights Speakers Cornhole Boards Cuts Plywood Sheetrock Plaster Fiberglass Plastic, 1-5/8\ to 8\ ( 40-200mm )
Professional Cutting - Hole saw cuts smooth and even 8" diameter holes through wood, drywall, plaster and plastic.
Cutting depth up to 3/4"(19mm) from one side, 1-1/8"(30mm) from two sides..
Safe & Clean - Ball bearing mounted ABS dust shield with soft silicon rubber gasket to trap the dust and shavings to prevent them from going airborne and making mess in your furnished home. It is also safe to use as protection equipment for hole cutting application..
Easy to Use - Includes everything you need to do-it-yourself, mandrel and drill bit work with any 3/8" drills & up..
Complete Set - This kit includes one professional grade adjustable hole cutter with two replaceable pilot drill bits (1x auger type Self-Feed pilot bit + 1x HSS pilot bit), two sets of replaceable cutting blades (1 set of high speed steel blades + 1 set of tungsten carbide blades), one ABS dust shield, one adjustment hex wrench, 5 Pcs brad-point wood drill bits and 5 Pcs Masonry drill bits 5/32.
Yonico 33209q Top Bearing Ultra-Performance Compression Flush Trim Router Bit 1/4-Inch Shank
This Top Bearing Ultra-Perfomance Compression Flush Trim Router Bit is constructed from solid carbide and has a 1-1/8" cutting length and a 1/2" diameter with an overall length of 2-3/4" and a 1/4" shank..
Flush trim endgrain of any direction for a perfect finish.
High performance C3 micro-grain solid carbide sleeve, polished to a mirror finish.
For use on table mount and handheld router.
Bit is contructed from a solid carbide sleeve welded to a hardened steel core.
7 Pcs TCT Hole Saw Kit, Tungsten Carbide Tipped Hole Cutters Set Heavy Duty for Stainless Steel Hard Metal Wood Plastic, Dia Size 3/4” 7/8” 1” 1-1/8” 1-1/4” 1-3/8” 2”, with Extra Pilot Drill Bits
Cutting Holes in 7 Different Sizes: Package includes 7 Hole Saws in most popular sizes - 3/4” (19mm), 7/8” (22mm), 1” (25mm), 1-1/8” (29mm), 1-1/4” (32mm), 1-3/8” (35mm), and 2” (50mm), cutting perfect holes for conduit and pipes.
TCT Hole Saw Kits for Hard Materials: This Set of Tungsten Carbide-Tipped Hole Cutters can cut precise holes in a lot of materials, such as stainless steel, mild steel, copper, iron, FRP, aluminum, wood and plastic with thickness up to 1/5” (5 mm).
Double Pilot Drill Bits for More Holes: Each hole saw kit includes 1 Hole Saw, 1 Hex wrench and 2 Pilot Drill Bits.
Starting with lower torque and lower speed, using cutting oil as lubricant will ensure clean holes and also prevent bit from getting burnt or broken.
Designed for Tough Jobs: All the Hole Cutters built with carbide tipped teeth and 3/8” 3-Flatted Shank, allowing a strong and steady chuck grip for heavy duty hole cutting applications.
compatible with drills, impact drills and CNC drilling machines.
Well Organized and Rust-Resistant: Each hole cutter kit is oiled and packed in a Semi-Transparent plastic carrying case for rust-resistant & well-organized storage and easy access.
Please feel free to contact us if you have any problem in using the Hole Cutte....
