Best Solid carbide

marddpair 6 Pcs 0-6 Outside Micrometer 0.0001 Carbide Standards Micrometers

  • Complete with calibration standards and wrenches.
  • Micrometer Ranges: 0-1, 1-2, 2-3, 3-4, 4-5 And 5-6.
  • Crisp, clear, easy-to-read graduation, accurate to 0.0001.
  • Hardened and ground spindle with carbide anvil ensure durability and accuracy.
  • Ratchet handle for precise application of force.
  • Includes adjustment wrench and calibration standards.
Check Stock

uxcell 1.75mm Solid Carbide Drill Bits Straight Shank for Stainless Steel Alloy Hard Steel, Hardened to 50 HRC, 2 Pcs

  • Specification: Diameter: 1.75mm / 0.07″.
  • Made of Solid Carbide (Tungsten Steel), Hardened to 50 HRC.
  • Applications: Widely Used on cast iron, non-ferrous alloys, high silicon aluminum, copper, plastics, hard rubber etc..
  • For Abrasive Materials: Designed for drilling abrasive materials when drilling accuracy must be maintained. Can be used in high temperature drilling applications.
  • Solid Carbide Tool: Offering long tool life and faster cutting speeds than other substrates, but is more brittle.
  • Please Note: Must be used with a rigid tool-holding systems. Fine grinding drill obtain accuracy and fine finish than other substrates.
Check Stock

uxcell 3.25mm Solid Carbide Drill Bits Straight Shank for Stainless Steel Alloy Hard Steel, Hardened to 50 HRC, 2 Pcs

  • Specification: Diameter: 3.25mm / 0.13″.
  • Made of Solid Carbide (Tungsten Steel), Hardened to 50 HRC.
  • Applications: Widely Used on cast iron, non-ferrous alloys, high silicon aluminum, copper, plastics, hard rubber etc..
  • For Abrasive Materials: Designed for drilling abrasive materials when drilling accuracy must be maintained. Can be used in high temperature drilling applications.
  • Solid Carbide Tool: Offering long tool life and faster cutting speeds than other substrates, but is more brittle.
  • Please Note: Must be used with a rigid tool-holding systems. Fine grinding drill obtain accuracy and fine finish than other substrates.
Check Stock

ASZLBYM 2PCS 5/8\ MGIVR2016-2 MGIVL2016-2 Lathe Boring Bar Grooving Cut-Off Tool Holder with 2PCS MGMN200-G NC3020 Insert

  • Sclcr Boring Bar 5/8" Shank Diameter, Overall Length 8”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree，negative 5 degree end & side cutting angle.
  • Packing:1 pc 5/8'' x 8'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5).
Check Stock

MCJ TCT Tools Hole Saw Set of 6 Electrician Tungsten Carbide Tipped Hole Cutter Set with Titanium-Plated Pilot Drill bit for Metal, Stainless Steel, Iron, Wood, and Plastic Sizes 7/8", 1-1/8", 1-3/8", 1-3/4", 2", 2-1/2

  • Industrial grade high-quality T.C.T. Carbide ( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust-proof, sturdy, and durability.
  • Tungsten carbide tipped hole cutters are ideal for drilling steel plate, stainless steel, iron, aluminum, copper, cast iron, fiberglass, and plastic.
  • Manufactured with premium high-grade solid carbide tips for added strength and durability. Tipped teeth for extra lifespan with tip: up to 1/4" cutting depth for stainless steel with a hand drill, 1" depth with a drill press.
  • Designed for use in a chuck - can be used with drill press or a hand drill.
  • Includes Sizes: 7/8",1-1/8",1-3/8",1-3/4",2",2-1/2" Set comes with customized casse for portability and designated slots to keep everything in place.
Check Stock

SpeTool 5PCS 2 Flutes Square Nose End Mill Set Power Milling Machine Carbide Upcut CNC Router Bits Tiain Coated, 1/4 inch Shank, 2 1/2 inches Long Overall

  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
  • Flat Top with 2-Flute, Material: Solid Carbide with TiAlN Coated for HRC 55.
  • For CNC Machine.Cutting Steel, Metal, Inconel, Stainless Steel, Titanium Alloy etc.
  • The Endmill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

Whiteside 6700A Slotting Cutter 1-7/8CD 1/16CL 5/16Bore 3Wing by Whiteside

  • Whiteside Slotting Cutter 6700A: 5/16"B, 0.062"CL, 3-WING.
  • Slotting cutters create a small slot in your project for various uses..
  • Made from solid alloy steel and micro-grain carbide..
  • Precision ground for proper balance at high RPM..
  • 6700A Whiteside Carbide Tipped Slotting Cutter 1-7/8CD 1/16CL 5/16Bore 3Wing.
Check Stock

Kodiak Cutting Tools KCT133263 USA Made Ball Nose Premium Carbide End Mill, AlTiN Coated, 4 Flute, 1/8\ Shank, 1/2\ Length of Cut, 1-1/2\ Overall Length, 1/8\ Diameter

  • Solid Carbide Spiral Router Bit with 5/16 inch Shank and 5/16 inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
  • Round Top with 4-Flute, Material: Solid Carbide with TiAlN Coated for HRC 55.
  • For CNC Machine.Cutting Steel, Metal, Inconel, Stainless Steel, Titanium Alloy etc.
  • The Route Bit Suit for CNC Router and the Brand Plunge Router with 5/16" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

EANOSIC 60 Degree V Groove Router Bit 1/4 Inch Shank 3-Flute Nano Blue Coated Solid Carbide V Router Bit for CNC Engraving and Chamfering

  • INDUSTRIAL GRADE CNC V Groove Bit: 1/4” shank.
  • SOLID CARBIDE AND NANO BLUE COATED: The 60 degree v groove router bit is made of solid carbide. And nano Blue Coating with high hardness and heat....
  • 3 Flutes Designed V Bit to make cutting more efficiently and clean surface..
  • This 1/4 shank 60 degree v bit is perfect for creating beautiful v-groove engraving artwork, CNC lettering and signs and chamfering end..
  • Used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic and etc..
Check Stock

LEATBUY Router Bit Set 1/4-Inch Shank 2 PCS Tongue and Groove Floor V-Notch Wainscotting Flooring Matched Router Bits Set with Edge Banding 1/4-Edge

  • ※※【Premium Size】--45 degree Router bit 1/4 "X 1-1/8". 1/2" Shanks.Create tongue and groove joints for wood flooring. This set will cut....
  • ※※【Smooth & Sharp Cutter】--Carbide cutters,featured with double flutes, straight shank, Solid hardened steel bodies with Anti-Kickback Design,....
  • ※※【High Quality】--Using high-grade YG6X original alloy. High abrasion resistance, high-precision grinding technology. Strong and durable.....
Check Stock