EC Buying AD620 High Accuracy Low Power Programmable Instrumentation Amplifier Module Voltage Amplifier Module Differential Amplifier Single-Ended/Differential Small Signal/Small Amplifiers Module
... range of 1 to 10,000. Ideal for portable (or remote) applications. With high accuracy, low offset voltage, and low offset drift, the AD620 is ideal for precision data acquisition systems such as electronic scales and sensor interfaces. Also features low noise, low input bias current, and low power consumption. The module has a fixed voltage output..
♥Basic Features: ✭Module Name AD620 Instrument Programmable Amplifier ✭Module size:50mm * 50mm ✭Module power supply: 5V-24V ✭Module input signal type: single-ended signal or differential signal ✭Module signal input and output range: the input signal range is within 100 microvolts of the power supply, and the output signal range is within the power supply ✭Module bandwidth: AD620: 120KHz (G=100), AD623: 800KHz (G=1), AD620/623 is lower than 50KHz at high gain, and higher than 1MHz at low gain.
♥ Other Features: ✭Module gain: When there is no solder slip, the AD620 will zoom by 10 times by default, and the AD623 will zoom by 20 times by default. During welding slip, AD620: G=1+50K/Rg, AD623: G=1+100K/Rg ✭Maximum magnification of the module: more than 2000 times (actual measurement), due to the large gain of the waveform frequency band, it is recommended to use multi-stage amplification wi....
This is the "momentary" variety of the touch sensor - touch and it turns on, release and it turns off..
Positive and negative can be used as a touch surface,can replace the traditional touch button..
Four M2 screws positioning holes for easy installation.Module can be installed in such as surface plastic, glass of non-metallic materials..
In addition to the thin paper ( non-metallic ) covering the surface of the module , as long as the correct location of the touch , you can make hidden in the walls, desktops and other parts of buttons..
The module is based on a touch-sensing IC (TTP223B) capacitive touch switch module. In the normal state, the module output low, low power consumption.
When a finger touches the corresponding position, the module output high, if not touched for 12 seconds, switch to low-power mode..
uxcell BWL100 100 mm Pull Rod Linear Position Displacement Sensor for Printer
Shipping list: AC 220V vibration sensor delay module, with ultra-high sensitivity vibration sensor..
AC 220V power supply ultra-high sensitivity vibration delay module plus relay module plus delay three-in-one module, vibration switch module Alarm trigger, with 1 vibration sensor. Relay does not have B1 normally closed end..
AOICRIE 2PCS DS3231 Real Time Clock Module RTC Clock Memory Module 3.3V/5V for Raspberry Pi (2PCS Yellow)
The RTC clock module is of complete clock calendar functions include seconds, minutes, hours, day, date, month and year timing , provide valid until the year 2100 leap year compensation.
The RTC clock module is of ±3℃ digital temperature sensor, and the timing accuracy kept at ± 5ppm (± 0.432 sec / day).
The RTC clock module has the characteristic of low power consumption, with 1 Hz and 32.768 kHz output.
The RTC clock module itself can be adapted to 3.3 V and 5 V system, with -40 ° C to +85 ° C temperature range, easy and convenient to use.
for Raspberry pi highest precision clock module DS3231, note board can also use this module..
DSD TECH HM-18 CC2640R2F Bluetooth 5.0 BLE Module Compatible with HM-10 for Arduino
Original HM-18 module: DSD TECH brand guarantees and we accept refund without any excuse..
Bluetooth 5.0 BLE Module: The chipset is CC2640R2F from TI,Compared to the Bluetooth 4.0 module, this BLE module has a faster transfer rate and a larger MTU..
Compatible with HM-10, if you are using HM-10 now, you can quickly upgrade your board to Bluetooth 5.0 BLE..
Free APP: DSD TECH offers a free app that you can get this module into work in 5 minutes. Please search "DSD TECH Bluetooth" in Google Play App store..
DSD TECH back this HM-18 Bluetooth 5.0 BLE module with ONE Year WARRANTY and lifetime technical support. If you meet any question, please contact us, we will fix your issue within 24 hours.
EQUIPMENT INTERFACE MODULE(EIM): All HVAC equipment is wired to the module. Module receives communication from the wireless devices.
RETURN AIR SENSOR: Works with the Equipment Interface Module to maintain safe indoor temperatures if power is lost at the wireless thermostat. Maintains 62 F for heating and 82 F for cooling.
Module receives communication from the wireless devices.
Maintains 62 F for heating and 82 F for cooling.
THERMOSTAT: Same great features of the FocusPRO thermostat - now wireless..
DSD TECH HM-19 Bluetooth 5.0 BLE Module with CC2640R2F Chip Compatible with iOS Devices
Original HM-19 module, DSD TECH brand guarantees and we accept refund without any excuse..
Bluetooth 5.0 BLE Module: The main IC is CC2640R2F from TI,Compared to the Bluetooth 4.0 module, this module has a faster transfer rate and a larger MTU..
Fully compatible with HM-11,HM-17, if you are using HM-11 or HM-17 now, you can quickly upgrade your board to Bluetooth 5.0 BLE..
DSD TECH offers a free app that lets you quickly integrate this module into your project.Please search "DSD TECH Bluetooth" in Google Play and the Appstore..
DSD TECH back this HM-19 Bluetooth 5.0 BLE module with ONE Year WARRANTY and lifetime technical support. If you meet any question, please contact us, we will fix your issue within 24 hours.
