Best Spindle Collet

CNC Router Machine 2.2KW 4 Axis 6090 USB CNC Router Kit 3D Engraving Machine + VFD Water-Cooling Spindle Motor +Control Box + Handwheel, Ball Screw, with Limit Switch, US STOCK

  • ✅ [Powerful Performance] Spindle Speed: 24000RPM. Spindle motor: 2200Whigh-speed variable frequency spindle motor, ER20 chuck, matching 6mm collet. Working Speed :50-1500mm/min. Drive of Stepping motor: 0-3.5A adjustable four-axis drive. Variable-frequency Drive(VFD): AC110V, 0-400Hz(built-in Control box ) (Tips: The spindle motor must connect with the VFD. It cannot directly connect with the supply voltage (AC110V).).
  • ✅ [ROUTER 6090 Parameters] Model: CNC6090GZ. X,Y,Z Working Area: 900(Y) x 600(X) x 140mm(Z). Outside dimension: 1150x970x650mm(LxWxH). Working platform size: 1045x720mm(LxW). Frame Material：The whole machine used 6061 aluminum profiles. Max. Feeding height: ≤140mm(From base of Z axis to platform). X/Y/Z axis--- Ball Screws. Stepping motor: 57 Two-phase 3A 150N.cm..
  • ✅ [High Quality and Durable] Water Cooled Spindle Motor Can Work Longer Time Than Air Cooled Motor. Has Higher Stability And Better Concentricity Than Air Cooled Motor. High quality accurate ball Screws drive make the engrving more precision. Anti-blackflash, high precision, long life circle. (Note: Please don’t change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor.).
Check Stock

Zhong Hua Jiang Spindle Motor Air Cooled Spindle 110V 2.2KW 2200W 4 Bearings 24000RPM 400HZ CNC Motor for CNC Router milling Machines Factory Direct Sales

  • 【TECHNICAL PARAMETERS】-3HP, 2 Poles, Collet ER20(compatible with bits between 1/25" and 1/2" ),Diameter： Φ80mm，Voltage: 110V ,Power: 2.2 KW,....
  • 【ADVANTAGE 】- Authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer than ordinary spindle motor.
  • 【EASY AND FAST TO INSTALL 】-We offer pre-soldered wire with aviation connector, it will take just 3 minutes to connect spindle motor to VFD..
  • 【APPLICATION】:Wood/ PVC/PCB/PMMA/Plastic/Aluminum carving/engraving machine, advertisement engraving machine,CNC router machine, small sized....
  • 【WARRANTY ASSURANCE】-We have 20 years manufacturing experience in this field, any question or problem , pls contact us ,we will get you satisfied....
Check Stock

2.2KW Water Cooled Spindle Motor ER20 24000rpm 400Hz+2.2KW VFD Inverter Variable Frequency Driver 110V+80mm Clamp+80W Pump+6m Pipe+14pcs Collet CNC Kit for CNC Router Engraving Milling Machine

  • ♞【2.2KW Water Cooled Spindle Motor】Operating Speed:0-24000rpm.
  • ♞【2.2KW Inverter VFD 110V】Input Voltage: 110V(+/-15%).
  • ♞【80mm Clamp】Diameter: 80mm Material: Aluminum,Cast aluminum.
  • ♞【80W Water Pump+6M Pipe】Pump length:3.2m.
  • ♞【14Pcs ER20 collet】Full set including 1mm, 2mm, 3mm, 3.175mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm.
Check Stock

Test Indicator 0.0005\ 0-15-0 and Holder Quill Clamp for Bridgeport Mill Cenral Locking 3D Arm 1-7/8\ Anytime Tools

  • Clamp to the Bridgeport standard 1-7/8" quill without removing the tooling from the collet..
  • 3 Dimensional central locking arms. Extend your indicator up to 7"(14" Dia) from the spindle center.
  • Suitable for Test Indicators with Dovetail or Dial Indicators with 3/8" collar.
  • ALL METAL construction. Adapts immediately for positive and fast indicating.
Check Stock

Zhong Hua Jiang CNC Spindle Motor Kits 110V 2.2KW Air Cooled Spindle Motor+110V 2.2KW VFD+Φ80mm Clamp Mount + ER20 Collet kit+ Drill bits+ wire+ wrenches for CNC Router machine

  • 【PACKAGE INCLUDE】-1pcs 110V 2.2KW air Cooled Spindle Motor +1pcs 110V 2.2KW VFD inverter+ 1pcs Φ80mm Clamp Mount +13pcs ER20 Collet(1mm-13mm)....
  • 【ADVANTAGE 】- Authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer than ordinary spindle motor.
  • 【EASY AND FAST TO INSTALL 】-The VFD had been pre-programmed for basic parameters , you don't need to make extra setting up.We offer fully complete....
  • 【APPLICATION】-Wood/ Copper/Brass/Aluminum/PVC/Plastic/ carving/engraving machine, advertisement engraving machine,CNC router machine, small sized....
  • 【WARRANTY ASSURANCE】-We have 20 years manufacturing experience in this field, any question or problem , pls contact us ,we will get you satisfied....
Check Stock

Comgrow 775 DC Motor DC 12V - 24V Max 10000RPM - 20000RPM Ball Bearing Large Torque High Power Low Noise Gear Motor Electronic Component Motor

  • Strong Compatibility: Suitable for ROBO CNC series engraving machines.
  • Reliable Quality: Double ball bearing design, stronger engraving ability..
  • Great Collect: High-quality collet chuck can be more stable..
  • Quick Installation: It can be directly installed on the spindle of the engraving machine.
Check Stock

DEWALT Die Grinder with No Lock-On, Brushless, Variable Speed, Paddle Switch, 2-Inch (DWE4997NVS)

  • Brushless motor for long motor life and no brush changes for the die grinder.
  • The electric die grinder features no-load speed of 7500 to 25000 RPM for speed range during all types of applications.
  • Spindle lock button of the DEWALT die grinder is made for quick accessory change.
  • Precision 1/4-inch collet with 1/8-inch reducing sleeve for gripping strength, allowing user to operate both 1/4-inch and 1/8-inch shaft accessories.
  • AC/DC capacity works off welding machines and generators for productivity and versatility.
Check Stock

Bosch PR004 Offset Base With Roller Guide for the Bosch Colt PR20EVSK & PR20EVSNK Palm Routers

  • Offset base designed to work with Bosch palm routers PR20EVSK and PR20EVSNK.
  • Permits routing of near-vertical surfaces such as laminate applied to the top of a countertop backsplash.
  • Quick-Clamp System allows motor to be easily moved from base to base.
  • Includes base, base cover, phenolic sub-base, 1/4-inch self-releasing collet, drive gear, roller guide for PR004, wrench..
Check Stock

Astro Pneumatic Tool 78835 Exhaust Pipe Stretcher Kit

  • Impact driven Heavy-Duty expander allows for fitting smaller exhaust piping and making exhaust seals.
  • 28mm size bolt head drives the tool and collet sets to expand pipes from 1-5/8" to 4-1/4".
  • Apply included grease to threads before use, impact wrenches rated for 800 ft-lbs tightening and above recommended to do most jobs.
  • Includes: Steel expander 1 5/8" - 2" Collet Steel expander 2" - 2 1/2" Collet 2 3/8"- 2 3/4" Collet 2 3/4" - 3 1/8" Collet 3 1/8" - 3 1/2" Collet 3 1/2" - 3 7/8" Collet 3 7/8" - 4 1/4" Collet.
Check Stock

uxcell 1/4\ Shank T Slot Router Bit 1/8\ Cutting Depth, 2 Flutes Carbide Tipped T Track Router Cutter (Beige, Gray)

  • overall length: 35mm. Tungsten carbide T slot router bit.
  • Applications: Widely used for processing softwoods, hardwoods, chipboard, plywood, and MDF etc. Designed for creating T-slot wall panels and radius edges on the T-slots.
  • Features: Industrial quality T type slot router bit. Carbide Tip with sharp cutting edge, high hardness and long life. Solid hardened steel body with anti-kickback design.
  • How To Use: Use on electric router, carving machine, edge trimmer, CNC and other automatic routers. Shanks of all bits must be inserted in the collet in full length.
  • Warm Tips: Cannot be used to cut ferrous metal and non wood materials. suggested feeding speed: 8-12M/Min.
Check Stock