Best Spindle For Filament

Grizzly Industrial G0709-14 x 40 Gunsmithing Gearhead Lathe

  • 2 MT#3 dead centers (1 carbide tipped) 1 MT#3 live center 1 MT#5 - MT#3 sleeve 1/2" drill chuck w/ MT#3 arbor.
  • Dimensions 51-3/4"H, 71-3/4"L, 30"W Approximate shipping weight 1550lbs 11" face plate.
  • Motor 2 HP, 110/220V, single-phase, 20/10 Amps, 60Hz, 1725RPM Number of speeds 8 Range of speeds 70-2000RPM.
  • Spindle bore 1-9/16" Spindle nose taper MT#5 Spindle nose D1-5 Camlock D1-5 spindle nose (6 pin) 1-9/16" spindle bore.
  • Swing over bed 14" Swing over gap 19-3/4" Swing over cross slide 8-3/4".
Check Stock

Kidco Y Spindle 2 Pack

  • For installation of a pressure-mounted gate on a staircase with balusters on both sides, you will need to use a K100 Installation Kit..
  • On all Gateway Models, the Y Spindle can be used on either side of the gate. Simply swap out the included padded spindles for a Y spindle on as many corners as is needed..
  • Many homes have staircases that aren’t bordered by a wall. In this situation the Y Spindle aids installation of the pressure mounted gates to these types of staircases..
  • The Y Spindle wraps around the baluster to provide a secure installation.
Check Stock

SOUTHWEST WHEEL 5-Hole, 4.5\ Bolt Circle Idler Hub for 2,000 lb. Axles (BT8 Spindle) 1\ Spindle

  • Round R30484X 84 Spindle & 6-5.5" Bolt Circle Trailer Hub..
  • 6 studs 5.5" Bolt circle using L68149 inner and L44649 outer bearing hub..
  • Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts..
  • 84 Spindle, Spindle width =1 3/4" Spindle length=4" Overall length =8 7/8" Capacity (pair) 3,000 lbs..
Check Stock

3D Printer Filament Bundle, PLA Filament Silk Shiny PLA Filament 1.75mm +/- 0.02mm, 3D Printing Filament 200g x 4 Spools

  • PLA FILAMENT SILK SHINY 4 PACK – Pack of Gold Black Red, Gold Red, Silver Blue, Green Blue filament. New design pla filament come with silk and shiny, excellent gloss. Color change very fast, so you can get both colors in a small object..
  • SMOOTHLY PRINTING – With greater toughness, 3d printer filament feeding will be smoother and will not break in the tube. The dimensional accuracy of the PLA filament 1.75mm is +/-0.02mm, so that print will be smoother without jamming nozzles..
  • EASY TO PRINT FOR BEGINNERS – High Purity PLA filament with good viscosity between layers and no warping, 100% no bubble, less stringing filament, good shape, easy to remove support..
  • HIGH PURITY PLA FILAMENT – PLA raw material is made of corn starch and safe for kids. Perfectly 3d printing with 99% FDM 3d printer and 3d pen..
  • PROFESSIONAL PACKAGE – Vacuumed sealed with high quality desiccant to keep the PLA filament dry and keep out dust. 【In case of any quality problem, please feel free to contact us for after-sales service – return or refund fully.】.
Check Stock

Bessey EKT55 One-Handed Edge Clamp, red & black

  • Outer spindle acts on the clamping jaws – inner spindle applies pressure to the front edge.
  • Two large non-slip, opposing, gentle jaws for positive grip.
  • Large swivel pressure plate with protective plastic cap.
  • Lightweight, corrosion-resistant aluminum housing designed for high static stress load.
Check Stock

YOUSU Carbon Fiber PLA Filament 1.75 mm for 3D Printer & 3D Pen 1 kg (2.2 lbs) Black

  • [Premium PLA Filament] Carbon fiber filament Compared with PLA, stronger toughness, higher strength and rigidity, brittle feel, low shrinkage, high fluidity, suitable for printing industrial products.
  • [Problem Free & Easy to Print ] Yousu Carbon fiber PLA filament has better dimensional stability for warp free printing, excellent layer adhesion,clog-free, bubble-free and easy-to-use, and easy support removal..
  • [ Cost-effective and Wide Compatibility ]Our Yousu Filament is Compatiable for Most FDM 3D Printers in the market,Such as Creality Ender,Ender 3,Anycubic,Flashforge, Makerbot,Aquila,Etc..
  • [Vacuumed Sealed Package] The Filament Net Weight: 1KG. Yousu PLA filament comes in a sealed vacuum bag with a desiccant bag, keep your 3d printer filament in a good condition to be printed. NOTE:Please pass the filament through the fixed hole to avoid tangles after use..
  • [Recommended printing conditions]: 195°C-220°C (depending on the printer model), Printing speed: 50-100mm/s. Hot bed temperature: 50 – 60°C.
Check Stock

CDMZJJ PLA 3D Printer Filament, 1.75mm 3D Printing Consumables Bundle 1KG/2.2lb, 0.25KG/Spool 4 Colors Pack - Black, Blue, White, Red

  • 4 in 1 Bundle 3D Printer Filament: Comes with 1KG/2.2lb 3D printer filament with 4 most popular colors: blue, black, white, red. 4 spools in one package, packed in vacuum sealed bag, each spool filament net weight is 0.25KG/0.55lb..
  • Dimensional Accuracy & Consistency: PLA 3D Printer Filament, 1.75mm in diameter, Minimum demission tolerance +/- 0.02mm to ensure consistent feeding and smooth printing..
  • Premium PLA Filament: Eco-friendly and low odor, tangle-free, clog-free, bubble-free, melt well and feed smoothly, perfect 3D Printer PLA filament for smooth and stable 3D printing experience, provides excellent surface finish of printed parts..
  • Wide Compatibility: 1.75mm diameter printing filament, works perfectly with diverse 3D printers and 3D printing pens that use 1.75mm filament on the market..
  • 3D Printer PLA Filament Using Tips: Recommended printing temperature: 200?-230?. Recommended printing speed: 50-100mm/s for better printing results..
Check Stock

Geeetech PETG Filament 1.75mm, Upgrade Stronger Toughness Printing Consumables, Diameter Tolerance +/- 0.03 mm, 1 KG (2.2 LBS) Spool Fit Most FDM 3D Printer, Black

  • 【PETG FILAMENT BUNDLE】- 250g petg filament,250g black petg filament, 250g white petg filament, 250g red petg filament, 250g blue petg filament..
  • 【PREMIUM QUALITY】 : Good shaping, strong toughness, no bubble, no jamming, no warping, melt well, feed smoothly and constantly without clogging the nozzle or extruder. Amolen petg filament, which have premium quality, print Much More Smoothly..
  • 【HIGH COMPATIBILITY 】-Works and harmonizes perfectly with most common 1.75mm FDM 3D printers, thanks to the high quality standards in terms of manufacturing accuracy and the small tolerance in diameter of +/- 0.03mm. Stable diameter accuracy offer you a smoothly feeding experience..
  • 【VACUUM & REUSABLE BAG】 - Vacuum packaging with desiccant to keep it dry and keep out dust.The bag has a sealing strip,the petg filament can be put back into the bag after use and sealed for storage..
  • 【WARRANTY & AFTER-SALES SERVICE】--Amolen is focus on high quality 3D petg filament, defective filament can be reissued or refunded fully.We provide professional 3D printing technical guidance and good 24/7 customer service..
Check Stock

TPU Filament 1.75mm TPU 3D Filament TPU Flexible Filament 0.5KG Spool for 3D Printing TPU Black

  • 【Soft And Elastic Filament】TPU filament is thermoplastic polyurethane that is soft and elastic like rubber. Easy obtain prints for seals, plugs,....
  • 【Diameter & Tolerance】High quality raw materials without no impurities ensures high precision diameter 1.75mm+/-0.03mm. Keep 1.75mm TPU filament....
  • 【Recommend Setting】Printing Temp, 205-230℃.
  • Printing Speed:0-40MM/s. The printing speed of TPU filament is lower than normal 3d filament..
  • 【TPU 3D Printer Filament Features】1.75mm TPU filament is easy to print thanks to excellent bed adhere and low-wrap. It is wear-resistant,....
  • 【Vacuum Packing And After-sale 】: Enotepad 1.75mm 3D printer filament is carefully vacuum packed with desiccant to keep dry. We are 24/7 hours....
Check Stock

AMOLEN 3D Printer Filament, Metal PLA Filament 1.75mm with Magnetic, Contains 20% Metal Iron Powder, Apply to Polishing, Matte Black PLA 3D Printing Filament +/- 0.03mm, 1kg/2.2lbs

  • 【Metal PLA Filament with Magnetic】 -- High quality 3D Printer Filament with magnetic, special matte black texture, contain 20% Metal Iron powder. This PLA filament is multifunctional with strong magnetic. Ideal for printing all kinds of little parts, screw, screw cap, chain, they can all be attracted by magnets. The matte black finish with magnetic filament is more widely applicable..
  • 【Apply to Sanding and Polishing】-- 3D Printer Metal PLA Filament are made of high quality raw materials, high density and tough. The matte finish print will show the different polishing effect by sanding with different grits of sandpaper to get a smooth and shiny print. Good shaping, odorless, no bubble, no jamming, no warping. NOTE: Please pass the filament through the fixed hole to avoid tangles after use..
  • 【Multifunctional PLA Filament】-- This Metal Iron Black PLA filament print smoothly and easy to print, with magnetic and suitable for Sanding and Polishing, with heat resistance quality, and corrosion resistance. Extrusion temperature range: 200 - 220℃.
  • Printing Bed (Optional)0-50℃;Printing speed: 30-60mm/s..
  • 【High Compatibility】-- AMOLEN PLA Filament is Perfectly compatible with most of the FDM 3D Printer, MakerBot, LulzBot, FlashForge, UP, Pri....
Check Stock