Best Spiral Flute Point Taps

HORUSDY 6-Piece NPT Pipe Tap Set, Sizes Includes 1/8\

Carbon steel pipe taps are designed to clean and/or rethread to damage or block pipe threads..
Right-hand cutting tool has a clockwise cutting function..
NPT Pipe taps sizes includes:1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14NPT, 1"-11.5NPT. Equipped with special storage box..
Round shank, square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts..
Uncoated tools have only the base material and do not need any additional treatment or coating, so they can be widely used..

Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carbon steel, abrasive steel, malleable cast iron, and other difficult to machine metal materials.
EASY STORAGE: Heavy-duty 17” x 2.25” x 12.75” inch (43.2cm x 5.7cm x 32.4cm) plastic blow-molded carrying case with 2 side latches and built-in handle for easy transportation, safe storage, and quick organization.
Each compartment is labeled with sizing for simple identification.
PACKAGE CONTENTS: Combination set contains both metric taps and dies.
Tap die set metric tap die metal threader package includes 35 taper taps, 35 plug taps, 35 dies, 2 tap holder wrenches, 2 die holder wrenches, 1 T-bar type tap wrench, and 1 carrying case.
(Thread pitch gauge not included, but we recommend using these taps to light up threads from the bolt).

...ns in shallow cuts. Upgrade your pipe threading game today with our composite steel pipe taps set..
Uncoated Tools for Versatile Use: Uncoated tools feature just the base substrate without any additional treatment or coatings. Our uncoated Pipe Taps Set are suitable for a wide range of applications, and the straight flute design allows chips to collect in the flutes as they cut..

There are total 6 pieces of taps in different sizes from M3 to M10 that you can use for tapping various threads.
They are taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them.
These taps are used on a machine to do the tapping, generally more accurate because human error is eliminated.
Taps are designed with spiral flutes and the chip clearing process would be better.
These taps are made from high speed steel and surface finished by nitriding for high hardness and rust resistance.

Tap Size: M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1, M8 x 1.25. Straight flute design, clear threads with no burrs. Provide downward chip removal, and fast tapping with accuracy..
Applications: Can make new threads or re-thread damaged or jammed threads. Tap most materials in through or blind holed conditions..
Material: High-speed steel hand taps are with high hardness and toughness for wear resistance, well suited for general purpose applications..
Coating: Uncoated taps feature just the base substrate without any additional coatings, and fit a wide range of applications..
Tips: Hand taps are operated by tap wrenches. Suitable for drilling or tapping aluminum, die steel, mild steel, copper, hard plastics, etc...

This tap and drill bit set produces a thread that is strong and easy to tap.
High-carbon steel plug taps are great for general-purpose threading.
135° split-point drill bits give fast, precise drilling.
Set pieces: 6 – 32 NC, 8 – 32 NC, 10 – 24 NC, 10 – 32 NF, 12 – 24 NC and 1/4″ – 20 NC plug taps and 7/64″, 13/64″, #29, #25, #21 and #16 drill bits, plus a T-handle tap wrench.

Carbon steel Pipe taps are designed to clean and or re-thread damaged or Jam Pipe threads.
Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
Round Shank with square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts.
Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.
NPT Pipe taps, sizes 1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14 NPT carbon steel Pipe taps in plastic pouch case.

- These taps are made from high speed steel 6542 and surface is coated with titanium for high hardness and rust resistance..
- There are total 9 pieces of taps in different sizes from M2 to M12 that you can use for tapping various threads..
- Taps are designed with spiral flutes is conducive to remove crumbs, not easily broken tap..
- They are used to cut new threads or repair damaged threads, you will have a smooth tapping experience with them..
- These HSS taps are great tools used to create screw threads, to cut or form the female portion of the mating pair..

Designed to remove broken studs, bolts, socket screws, and fittings.
Aggressive left hand spiral design for extra gripping power.
Easy out style spiral flutes embed themselves to increase grip as resistance increases.
Extractor size and recommended drill bit size are etched on each tool.
Set includes spiral flute screw extractors sizes EX-1, EX-2, EX-3, EX-4, EX-5, and EX-6.

High Speed Steel: These taps are made of high speed steel, which has high hardness and rust resistance, and is more accurate.
Spiral Grooves Design: The tap adopts a spiral grooves design, which has a better chip removal effect and a tapping experience..
6 Different Sizes: From M3 to M10, there are 6 different sizes of 1/4in hex shank taps for you to tap various threads.
Application: Used for drilling, tapping, chamfering, drilling holes in wood, copper, brass, aluminum, metal plates and plastics.
Fast Change Chuck: The pops up fast change chuck can be matched with the tap to work in hard reaches scenes. The installation is simple, convenient and practical.