Best Spiral Flutes

Drill America - DWTG5/16-18LH 5/16\-18 High Speed Steel Left Hand Spiral Point 2 Flute Tap, DWT Series

  • Tap shoots chips ahead of the cutting action reducing loading and clogging in the flutes.
  • They are recommended for use in through or blind holes.
  • Allow for chip accumulation in the bottom of the hole.
  • Ideal for threading a wide variety of ductile materials, copper and copper alloys, brass and non-metallics.
Check Stock

Yakamoz 10-Pack 1/8" Shank Upcut Spiral Router Bits 3-Flute 7/8" Cutting Length CNC Router Flat End Mill Bits for MDF Acrylic Wood PVC 7/8" Cutting Length

  • Type: Spiral (Upcut), Cutting Type: 3 Flutes with Flat End, Shank: 1/8" (3.175mm), Cutting Diameter: 1/8" (3.175mm), Cutting Length: 7/8" (22mm), Overall Length: 1-33/64" (38.5mm).
  • Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut groove and slots, mortises, cycles and dados with clean edge and bottom, better than straight bits..
  • The unique flute design makes cutting process easier and faster, smooth cutting without 2nd polishing process..
  • Great for carving, cutting, engraving, milling in materials like density board, plastic, PCB, PVC, PP, MDF, nylon, resin, plywood, hardwood etc..
  • Built with tungsten steel, the CNC router mill has the superiority of high hardness, high-temperature resistance, and wear resistance..
Check Stock

HOZLY 1/8 Inch Shank Carbide End Mills(3.175x17mm) Up & Down Cut CNC Spiral Router Bits 2 Flutes Milling Cutter for Engraving Milling 3D sculpturing Roughing Composite Multilayer Pack of 5

  • Up Down Cut,1/8″ Shank X 1/8″Cutting Dia, 17mm Flute Length with 2 Spiral Flutes, Total length 38 mm, 5 pieces per pack.
  • The Unique Flute Design makes cutting process easier and faster, Smooth Cutting Without 2nd polishing process, ALTIN-Coated Improved the bits service life.
  • Due to the Great hardness of solid Tungsten carbide, it provides excellent abrasive and wear-resistance, Bits Stay Balanced during High Speed rotation process.
  • Fast Chip-Removal volume and Speed, Non-stick With bits, Suitable For Composite multilayer board, hard wood, polywood, acrylic.
  • Double Flute Spiral Solid Carbide Up-Down Cut End mill Router bits are widely used For CNC Engraving, Milling, Roughing, Hollowing, 3D sculpturing purposes.
Check Stock

SDS Plus Hammer Drill Bit 50Pcs 1/4 in. x 6 in. Masonry Concrete Rock Drill

  • ✔️ 【SDS DRILL BIT DIMENSION】: 1/4" (Diameter) x 6" ( Overall Length).
  • ✔️ 【APPLICATION】: SDS Plus Drill Bit Is Ideal for Drilling In Concrete, Masonry, Stone, Bricks and Other Construction Projects.
  • ✔️ 【SDS DRILL CARBIDE TIP】: YG8C Tungsten Carbide Tip Ensure Quick Easy Drilling with Long Cutting Life.
  • ✔️ 【SDS PLUS HAMMER DRILL DOUBLE FLUTE】:S4 SDS Double Spiral Flutes Keeps Fast Easy Chips Removal with Fast Cut Speeds.
  • ✔️ 【SDS PLUS SHANK】: Made of Premium Quality of Crv Steel to Ensure the Long Cutting Life..
Check Stock

HQMaster CNC Router Bits 1/8" Shank CNC Bit End Mill Flat Nose Carbide Endmill Two Flute Spiral Upcut Milling Cutter Tool Set for Wood PVC MDF Hardwood 10Pcs (3.175 mm)

  • RANGE OF PROCESSING: For carving/cutting/engraving/milling/slotting/sculpturing in materials like MDF, ABS, PVC, acrylic, nylon, resin, plastics, density board, wood, plywood, hardwood etc. Ideal for three-dimensional sculpture, surface machining, 3D relief sculpturing, etc.
  • DIMENSIONS: Shank Dia=1/8" (3.175mm). Cutting edge diameter=1/8" (3.175mm). Cutting edge length/flute length=17mm. Overall length=38.5mm.
  • HIGH EFFICIENCY: These bits own sharp edge which is able for fast engraving that makes high efficiency, durable, high precision and not easy to break. It is smokeless and burr-free while processing.
  • PERFECT CUTTING: The design of flutes, larger spiral chip space of CNC Router Bit makes non-stick crumbs, smooth cutting and fast chip-removal.
  • PACKAGE CONTENTS: 10pcs solid carbide spiral upcut bits assorted in storage case.
Check Stock

uxcell Spotting Drill Bits 5mm Dia 5mm Shank 60 Degree Solid Carbide AlTiSin Coated 2 Flutes Round Shank Drilling Cutter

  • Spotting Drill Bits: Cutting Edge Diameter: 5mm / 0.2".
  • Total Length : 50mm / 2.0". Large spiral flutes provide neat and smooth cuts. Spiral groove facilitates the export of metal chip..
  • Wide Applications: Widely used for drilling steel below HRC60, such as stainless steel, carbon steel, die steel, alloy steel. The AlTiSin composite coating has high hardness, high wear resistance and high thermal stability..
  • Carbide Tool: Made of fine-grained tungsten carbide, the drill bit has good toughness, high hardness (HRC92), wear resistance and heat resistance. With good cutting strength and drilling effect, carbide tool offers long tool life and faster cutting speeds than other substrates..
  • Easy to Use: Universal chamfered round shank, easier clamping, stable cutting process. Suitable for CNC machining centers, CNC machine tools, precision engraving machines and other equipment. The longer the length of the tool clamped by the chuck, the better..
  • Tips: If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life. Select an appropriate feed rate and cutting speed to improve the tool life and obtain better processing accuracy and performance..
Check Stock

Wolfride 6PCS Tapping Drill Bit Set Metric Drill Tap Combination Bit Set M3 M4 M5 M6 M8 M10 Spiral Tap Drill Bit

  • High hardness, rustproof, solid and durable..
  • Drilling and tapping at the same time, save you time and effort..
  • Taps are designed with spiral flutes and the chip clearing process would be better..
  • There are total 12pcs of taps in 2 different standards that you can use for tapping various threads..
  • Their specifications are marked clearly on the surface, convenient to choose..
Check Stock

RorAem Champagne Flutes - Hand Blown Champagne Flutes Set of 4 Modern Champagne Glasses Crystal Champagne Flute Gifts for Wedding Birthday Party 8oz

  • MODERN CHAMPAGNE FLUTES SET OF 4: Roraem champagne flutes comes with champagne flutes set of 4, modern and elegant, brilliant clarity, pleasant to drink from, with a light and airy bowl formed at just the right angle to showcase champagne visual appeal, preserve the bubbles, and really allow the chamapgne to open up for the drinker to properly enjoy all of the aromas and flavors in the champagne flutes..
  • PREMIUM HAND BLOWN CHAMPAGNE FLUTES: These champagne flutes are made from 100% lead-free crystal glass, masterfully shaped and hand blown by experienced artisans using traditional 23 procedures. The outstanding finishing touches and crystal-clear design of these champagne flutes outline the natural color of the champagne for a new experience. Craftsmanship spirit makes Roraem glass unique and elegant..
  • CHAMPAGNE FLUTES GLASS DESIGN: Roraem champagne flutes set of 4 feature a reinforced stems for added stability, a narrow base to release bubble, and a large diameter at the bowl’s widest point to develop aromas. A skillful champagne flutes design silhouette that tapers towards the rim to help retain flavor and fizz. Leaving you with nothing to do but enjoy the bubbl....
Check Stock

Klein Tools 25950 Step Drill Bit Set Spiral Double Fluted Titanium Nitride Coating 1/4-Inch Impact Shank Rugged Case 4-Piece

  • 4 COMMONLY USED STEP BITS sized 1/2, 3/4, 7/8, and 1-3/8-Inch for cutting holes in wide variety of DIY applications and materials (up to 16 gauge steel, plastic, aluminum, wood).
  • TWO SPIRAL FLUTES on each step drill bit remove chips and help pull the bit through material for faster cutting.
  • TITANIUM NITRIDE COATING to help dissipate heat for longer bit life.
  • 1/4-INCH HEX SHANK for firm, positive grip in standard drills and impact drivers.
  • SPLIT POINT TIP starts hole cuts quickly and prevents drifting when pressure is added.
Check Stock

Klein Tools 25951 Electrician s Step Drill Bit Set Spiral Double Fluted Titanium Nitride Coating 1/4-Inch Impact Shank Case 3-Piece

  • 3 STEP BITS sized 7/8, 1-1/8, 1-3/8-Inch are perfect for hole cutouts in panels and j-boxes to accommodate most commonly used conduit sizes.
  • TWO SPIRAL FLUTES on each step drill bit remove chips and help pull the bit through material for faster cutting.
  • TITANIUM NITRIDE COATING to help dissipate heat for longer bit life.
  • 1/4-INCH HEX SHANK for firm, positive grip in standard drills and impact drivers.
  • SPLIT POINT TIP starts hole cuts quickly and prevents drifting when pressure is added.
Check Stock