Best Spiral Flutes Bits

DeWalt DT0109 Screwdriver and Drillbit Set (109 Pieces)

  • Designed to remove broken studs, bolts, socket screws and fittings.
  • Aggressive left hand spiral design for extra gripping power.
  • Spiral flutes are designed to embed themselves deeper into the metal as you turn the tool, so as the fastener resistance increases, the extractor's grip increases.
  • Extractor size and recommended drill bit size are etched on each tool..
Check Stock

Yougfin Cobalt Drill Bits, M35 HSS Metal Jobber Length Twist Drill Bit Set for Hard Metal, Stainless Steel,21PCS

  • 【High Quality Material】：Made from M35 high speed steel with cobalt for added durability, the Yougfin jobber twist bits are friction and heat resistant.
  • 【Dual Flutes】:Drill bits are rotary cutting tools that have two cutting edges and two flutes which are grooves formed in the body to provide cutting lips, to permit the removal of chips and to allow coolant or cutting fluid to reach the cutting action.
  • 【135° Split Point】：These bits have a small point angle of 135° and require less pressure when centering in the material. The point starts drilling at contact, reducing friction, pressure, and heat. The larger the point angle, the higher the contact pressure and the centering in the material requires more pressure.
  • 【Product Feature】: Twist drills are indicated in sizes. Assortment comes with a combined 21 sizes added：1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", 15/64", 1/4", 17/64", 9/32", 19/64", 5/16", 21/64", 11/32", 23/64", 3/8".
Check Stock

Center Drill Bit Set - 5Pcs Countersink Lathe Mill HSS 60 Degree Combined Center Drill Bit Mill Tooling Set for Wood Metal Alloy

  • PREMIUM QUALITY - The center and spotting drills are made of durable high speed steel for providing wear resistance and remove chippings clearly and long service life..
  • PRODUCT FEATURE - The bits with the 60°countersink angle have double ended design.Center drill bit can be used to process the centering hole and countersink of general material..
  • SPIRAL FLUTE - The combined center drill bits are design with spiral groove, decreasing friction and heat, which can help clear chips and debris away from the bit quickly. It is a useful tool for DIY amateur..
  • EASY TO USE - Easy to install and change bits fast.5pcs bits for you to choose a match type to drill 10 different countersinks..
  • WIDELIY USE - These center bits are used for producing center holds in components or work pieces with require machining between centers. Suitable for guiding twist drill for processing hole to reduce error..
Check Stock

Greenfield Threading 330133 GT/VTD SPGP D5 2FL GP Plug Spiral Point Tap, M8 x 1.0 mm

  • Greenfield Threading Plug spiral point tap: M8x1.0: Limit D5 number of flutes: 2. HSS substrate, bright finish..
  • Made from Premium High Speed Steel and Bright finish.
  • Made to Table 302A. 1.0 Threads Per Inch.
Check Stock

EANOSIC Spiral Router Bits Up Down Compression Bit 1/4 inch Cutting Diameter with Nano Blue Coated, 1/4 inch Shank Solid Carbide CNC End Mill for Wood Carving Engraver Milling Cutters for Mills Machines

  • UP & DOWN cut spiral router bit with 1/4 inch shank and 1/4 inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length.
  • SOLID CARBIDE AND NANO BLUE COATED: The up and down cut spiral router bit is made of solid carbide. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Clean surface, neat, no glitches..
  • Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut and downcut groove and slots, mortises, cycles and dados with clean edge and bottom, better than straight bits..
  • The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. And also for carbon steel, soft alloy steel, tool steel, cast iron, aluminum alloy..
  • The router bit suit for CNC router and any plunge routers with 1/4" collet..
Check Stock

Topline USA M42 Cobalt #44 Drill Bits 6-Pk

  • Jobber length bits designed for drilling stainless and hard steel, plastic and wood, Premium Swift Bore (Registered Trademark).
  • Hardened and tempered M2 high-speed steel bits fall between standard fractional drill sizes.
  • Precision ground, bright finish with polished flutes that increase chip ejection.
  • 135-degree split point for fast penetration and accurate starting with no center punch.
  • Wire Gauge Diameter: No. 44, Decimal Inches Equivalent: 0.0860, Tap Size: 4-36 NS, Overall Length: 2-1/8-inch.
Check Stock

BOSCH MP500T Drill Bit Set, 5 Piece

  • Upgraded multi-grind heads – deliver up to 85% faster drilling in metal than standard bits.
  • Hex shanks and impact rated – allows use in impact drivers and hammer drill/drivers for added versatility.
  • Sharp ground cutting edges – designed for advanced performance.
  • Steep flutes with ribs – deliver fast material removal in multiple materials.
  • Multi-application design – offers drilling in masonry, brick, block, tile, metal, wood and plastic.
  • Long-life construction – provides up to 9x life in multi-material applications than standard bits.
Check Stock

EANOSIC Spiral Router Bits Up Down Compression Bit 1/2 inch Cutting Diameter with Nano Blue Coated 1/2 inch Shank Solid Carbide CNC End Mill for Wood Carving Engraver Milling Cutters Extra Long 4”

  • UP & DOWN cut spiral router bit with 1/2 inch shank and 1/2 inch cutting diameter, 1-1/2 inch cutting length, 4 inch for total length.
  • SOLID CARBIDE AND NANO BLUE COATED: The up and down cut spiral router bit is made of solid carbide. And Nano Blue Coating with high hardness and heat....
  • Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut and downcut groove and slots, mortises, cycles....
  • The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. And also for....
  • The compression router bit suit for CNC router and any plunge routers with 1/2" collet..
Check Stock

Hanson 52402 Extractor Ex-2 Spiral, for Tap Die Extraction

  • Screw extractor set is designed to remove broken studs, bolts, socket screws and fittings.
  • Screw extractors feature an aggressive left-hand spiral design for extra gripping power.
  • IRWIN screw extractor size and recommended drill bit size are etched on each tool.
  • Spiral flutes are designed to embed themselves deeper into the metal as you turn the tool, so as the fastener resistance increases, the extractor's grip increases.
  • Recommended for use with TR-88 tap wrenches and 7/64-inch drills.
Check Stock

Spetool 90 Degree Carbide V Bits with Tiain Coated 4 Flutes Chamfer End Mill for Caving V Groove and Sign

  • Chamfer End Mill With 90 Degree, 1/4" Shank Diameter, 2" Overall Length..
  • The Router Bits Are Super for Carving V Groove, CNC Lettering And Signs, And Chamfering End..
  • 4 Flutes Designed Chamfer Bits to make Cutting More Efficiently And Clean Surface..
  • Solid Carbide Material With Tiain Coated, Applicable for Hard wood, Plywood, Soft wood, OAK, MDF And Metals Under HRC 55..
  • V Groove Router Bits Can Be Used in CNC,X Carve,Router hand and Table Mount, And Most Brand Handheld Routers with 1/4 Inch Collets..
Check Stock