HDMI ARC Audio Extractor 192KHz, HDMI ARC Adapter with 3.5mm Audio and L/R Stereo Audio for HDTV Soundbar Speaker Amplifier
【HDMI ARC function】 (The TV must have an ARC port, otherwise it cannot be used). Extract audio from your TV to Soundbar or Amplifier via the TV's ARC port. Use HDMI cable or Micro cable to connect one end to TV ARC port, one end to HDMI ARC Converter, then connect L/R or 3.5mm to sound bar, speaker, home theater, A/V receiver, etc..
【2 Ways to use】1. Insert the HDMI cable into the ARC port of the TV, plug the other end into the HDMI ARC adapter, connect the power supply, connect the R/L or 3.5mm to the audio device, and finally set the TV audio output. 2. Using the matching Micro cable, insert the USB port of the Micro cable into the TV, insert the other end into the ARC adapter (also power supply), connect the R/L or 3.5mm to the audio device, and finally set the TV audio output. (USB sound card function).
【192KHz sampling rate】Built-in CEC volume control protocol, the TV remote control can adjust the volume. Effectively solve the defects of similar products. Support 32, 44.1, 48, 96, 192KHz sampling rate, 24-bit left and right channels. (HDMI 2.0 cable recommended)..
【USB sound card function】It can be inserted into the computer device through the USB end of the micro cable, and the other end is connected to the ARC box, and the audio o....
165Amps Mig Welder, Dual Voltage Mig Welding Machine, Mig/Stick/MMA/Lift TIG Welder Machine, Gas Gasless Flux Wire Core Welder (MTS-165D)
...ultiple welding mode]: MTS165D adopts dual-voltage(110/220V) design, which can automatically read and indicate after power-on. Using IGBT inverter technology, it has high output efficiency, good dynamic performance and good load adaptability. The welding machine is an integrated design welding machine for Stick/MMA/ARC Welding/Lift TIG/2T/4T..
[Synergic Function]: One intelligence control system automatic compensate and adjust current/voltage.10 levels precise adjustment from -5V to +5V, Coordinate control mig wire feeder’s speed and current, which makes the machine easy to heat arc and instantaneous Increase the current convenient for striking the arc..
[Smooth Arc]: This MIG welding machine can work in conjunction with hot arc and arc forces and achieve smooth arc. Internal pre - set splash less and anti - adhesion, makeing a better arc starting effect. Very friendly for green hand and DIY users..
[Automatic Protection Function]: Automatic voltage and current control, built-in energy-saving fan automatically regulates the temperature and prevents overheating and dust enter.VRD against electric shock design makes welding workers safer..
[Easy to Use]：Friendly operation interface, front panel detailed identification with precise digital display. Frie....
Amico ARC-200 200-Amp Stick Arc & Lift-TIG Combo Welder 100-250V Wide Voltage 80% Duty Cycle Compatible with all Electrodes E6010 E6011 E6013 E7014 E7018 etc.
ARC-200 is a professional Stick Arc and Lift-TIG combo welding machine with an industrial level design. It is compatible with all electrodes: E6010,....
Automatic selection feature detects input voltage automatically, allowing you to easily switch between 100~250V/50~60Hz input power. Almost all of the....
Incorporates advanced IGBT inverter technology with superior arc characteristics and has excellent arc stability. 80% duty cycle at 200 amps ensures....
ARC-200 has very powerful functions, making it easy to start and use. The machine has a built-in hot start function, anti-stick function, thrust....
ARC-200 Stick Arc with Lift-TIG can achieve the perfect weld. It is a welding machine of the highest level.
Amico ARC-180DC 180-Amp Stick Arc & Lift-TIG Combo Welder 100-250V Wide Voltage 80% Duty Cycle Compatible with all Electrodes E6010 E6011 E6013 E7014 E7018 etc.
ARC-180DC is a professional Stick Arc and Lift-TIG combo welding machine with an industrial level design. It is compatible with all electrodes: E6010,....
Automatic selection feature detects input voltage automatically, allowing you to easily switch between 100-250V/50-60Hz input powers. Almost all of....
Incorporates advanced IGBT inverter technology with superior arc characteristics and has excellent arc stability. 80% duty cycle at 180 amps ensures....
ARC-180DC has very powerful functions, making it easy to start and use. The machine has a built-in hot start function, anti-stick function, thrust....
ARC-180DC Stick Arc with Lift-TIG can achieve the perfect weld. It is a welding machine of the highest level.
Amico ARC-200, 5-200 Amp Stick Arc Lift-TIG Combo Welder, 100-250V Wide Voltage Welding, 80% Duty Cycle, Compatible with all Electrodes: E6010 E6011 E6013 E7014 E7018 etc.
ARC-200 is a professional Stick Arc and Lift-TIG combo welding machine with an industrial level design. It is compatible with all electrodes: E6010, E6011, E6013, E7014, E7018, etc. The machine has an excellent Lift-TIG arc welding function.
5-200A comfortably welds thin stainless steel and other various metals..
Automatic selection feature detects input voltage automatically, allowing you to easily switch between 100~250V/50~60Hz input power. Almost all of the voltages and frequencies can be used. Adjustable arc force settings allow you to meet your custom welding needs..
Incorporates advanced IGBT inverter technology with superior arc characteristics and has excellent arc stability. 80% duty cycle at 200 amps ensures long time welding and the machine can still work normally with an extended power cord up to 700 feet. The power cord can resist power fluctuations and cable attenuation at any length..
ARC-200 has very powerful functions, making it easy to start and use. The machine has a built-in hot start function, anti-stick function, thrust adjustment function, current-intensity control function, and automatic compensation for voltage fluctuations: over-voltage protection, under-voltage protection, over-current protection, and over-load protection..
