OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches.
Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines.
Rugged construction will easily support the weight of heavy clutch discs.
To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec.
NexADD Fan Clutch Wrench Set 32mm & 36mm Water Pump Holder Tool Fit for BMW Ford GM Chevrolet,Fan Clutch Nut Wrench Set,Fan Clutch Removal Tool,Water Pump Pulley Holder,Clutch Fan Removal Tool Kit
REMOVE & REINSTALL AUTOMOTIVE FAN CLUTCHES ★- The NexADD 32mm & 36mm Fan Clutch Wrench Kit with Fan Pulley Holding Tool removes lock nuts on temperature-dependent thermo-viscous fans. The holder bar keeps the water pump pulley in place while loosening the radiator fan. It is a direct replacement and completely fit, wich could help you save much money..
FITS YOUR VEHICLE★-The NexADD Fan Clutch Wrench Set is compatible with BMW vehicles, including, but not limited to,the following applications: fan clutch wrench tool is kit compatible with BMW M4 M10 M20 M30 M40 M44 M50 M52 M52TU M54 M56 M60 M70 M73 S14 S38 S54 S50B30 S50B32 and compatible with Ford.Also compatible with some Ford, GM, and Chevy models..
BUILT TO LAST★- The 15" fan clutch wrench and holder are specially lengthened to provide extra leverage with sure grip when working on hard-to-get-to fan clutch nuts on metric thermo-viscous fans, letting you service your timing or water pump quickly and easily. The rubber handle covered in the middle helps prevent hand fatigue during prolonged us..
EASY TO USE ★- Attach the pulley holder bar with your bolts inserted through the holes, lock into place on water pump face, place wrench on fan clutch nut, and loosen the fan clutch nut by turning clock....
Xth-Nth 11\ Heavy Duty Pop Rivet Tool, Rivet Gun 360-Degree Pivot Head, Hand Riveter with 4 Interchangeable Rivet Heads, 200Pcs Rivets and BMC Case
【Sizes Commonly Used In Daily Life】 SAE And Metric Packages Are Available, Which Include 6 Mandrel (10-24,1 / 4,5 / 16, M5, M6, M8) , 30 Nuts (5 Rivet Nuts Per Mandrel).
【Usage】 Fix The Hexagon Rivet Head With A Wrench And Turn The Screw (Driven By Hand Or Electric Drill) To Achieve The Function Of Riveting The Rivet Nut.
【Firm And Durable】 The High-Quality Manual Electric Riveting Nut Tool Is Made Of Chromium Steel, Which Increases The Durability And Strength Of The Tool. The Surface Of The Product Is Treated To Prevent Corrosion And Has A Longer Service Life. The Rivet Nut Gun Is Equipped With A Suitcase To Facilitate Storage And Prevent Loss. The Size Of The Bolt Is Ordinary Hexagon Bolt, Which Can Be Matched Locally After The Bolt Is Worn..
【Wide Application】 The Rivet Nut Kit Provides Customized Fastener Solutions For A Wide Range Of Riveting Applications. The Rivet Tool Set Is Very Suitable For Connecting Various Metal Plates And Pipes, And Can Be Widely Used In The Riveting Of Light Industrial Electrical Products Such As Automobiles, Ladders, Furniture, Decoration, Etc..
【Remarks And Warranty】 We Offer You A 30 Day Refund And Half Year Warranty To Ensure Your Satisfaction. If You Have Any Problems, Please Send Us Your Order Num....
Dorman 14505 Clutch Alignment Tool Compatible with Select Models
OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches.
Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines.
Rugged construction will easily support the weight of heavy clutch discs.
To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec.
2 inch O.D. shaft, 1-1/4 inch pilot, 10 splines, splines are 3.6 inches long.
Avhrit Cordless Rivet Tool, 2-in-1 Electric Rivet Nut Gun for Rivets(1/8'', 5/32'', 3/16") & Rivet Nuts (1/4",5/16",3/8"), Automatic Rivet Gun with Memory Mode
Riveter＆Rivet Nut : Avhrit cordless rivet tool with replaceable nose, support rivet mode and rivet nut mode. You can choose different functions according to different needs.
2 in 1, more efficient. Rivet Mode: 1/8'' 3.2mm.
Larger-capacity Battery - It equipped with a 4.0Ah battery, the battery is designed with 10 cells. With over-voltage protection, over-current protection, over-temperature protection. Not only can prolong the service life of the battery, but also the safety is excellent. You don't need to worry about battery life when you use it outdoors for a long time..
Smart Rivet Mode - Built-in high-performance memory chip, can turn on smart mode. After completing the setting, release the switch after the riveting is completed, and the rivet will automatically exit. Or you can just press a button in the rivet nut, and it will do it automatically, doing your job more efficiently and accurately..
Cordless Operation: No cable restrictions, you just need to plug in the battery, you can use it anywher&#....
Muzata Hand Rivet tool Nut Setter Kit,Thread Blind Riveting Tools,Wrench Nut Sert,5pc Metric Mandrels and 130pc M3/M4/M5/M6/M8 Rivnuts,Rugged Carrying Case RK01
DURABLE RIVNUT TOOL - Muzata rivnut tool is made from thick carbon steel with heat treated, black phosphating finish which protect against corrosion....
This rivnut tool kit provides a customizable fastener solution for wide riveting applications:body panels,bicycle attachments,furniture and....
The rivnut tool /rivet nut tool is built with an ergonomic, arc-shaped and anti-slip handle. These handles allow you to generate more torque with less....
The rivnut tool is completed with 5 interchangeable mandrels (Metric M8, M6, M5,M4,M3) and 130pcs rivet nuts includes M3(1/8")....
This hand riveter rivet tool nut setter kit is easy changing of mandrels and nose pieces by hand,Includes wrench to hold handles and adjust mandrels.
Weaver Leather Heritage Rivet and Burr Setter, #12
[Unbelievable! 40 Set Solid Copper Rivets and Burrs for Leather] Totally 40 rivets and burrs set: 15 x copper rivets and burrs(11mm x 4mm x 19 mm), 15 x copper rivets and burrs(11mm x 4mm x 14.5 mm), 10 x copper rivets and burrs(10mm x 3.4mm x 19 mm), 1 x 2 IN 1 rivet and burr setter is used for both size 9 and size 12 burrs rivet. 2 x leather hole punch cutters(Dia. 3.5mm and Dia. 4mm)..
[Stunning Size 9 and Size 12 Copper Rivet Fastener Install Setting Tool and Extra Dia. 3.5mm and Dia. 4mm Precision Round Leather Hole Punch] 2 IN 1 Stainless steel heavy duty setter, one tool can install the rivets in No. 9 Size, No. 12 Size. Bigger convenient and higher efficient. Size: 4.7"x 0.79" x 0.43"(L x W x H).
2Pcs Heavy-duty permanent round hollow hole punch cutters, quenching treatment, more rigid and durable..
[In Less Than Few Mintues, Make A Nice Finished Rivet, Enjoyed The Happiness Brought By Leather Craftsmanship] Whether you are a hobbyist of leather crafts or a professional, it is worth having the copper rivets kit, which is EASY to operate and QUICK to install. Don't worry about installation failure..
[More Quantity & It Is Far More Cost-effective, 40 Set, 2 Lengths, 2 Sizes Copper Rivets for Leather] 40 x Rivet and burr set, more quantity tha....
QISF 2Pcs Magneto Flywheel Puller 24mm & 27mm and 20mm & 24mm Clutch Lock Nut Spanner Tool for Motorcycle ATV Dirt Bike Scooter Repair Tool
【Function】-- Clutch plate hub nut spanner tool designed to loosen and tighten the lock nut for the removal and installation of a motorcycle clutch.Another Used for removal of the flywheel or rotor if applicable..
【Fits】 Flywheel Puller for GY6 50CC 125CC 150CC Yamaha Honda Suzuki KTM ATV scooter dirt bike.
Clutch lock tool for 50cc-125cc Honda Motorcycle ATV Dirt Bike Go Kart Pit Bike 4 Wheeler.
Flying Horse 2-Stroke Motorized Bicycle Clutch Lever – Gas Bike Clutch Handle Replacement
DIRECT REPLACEMENT: The Flying Horse Motorized Bicycle Clutch Handle is used on most standard two stroke motorized bicycle engine kits and is used to engage and disengage your engine..
SPRING LOADED LOCK: This clutch lever features a spring loaded button that will lock your clutch lever in the disengaged position. That way when you choose to ride your bike with out the engine you no longer have to hold the clutch lever pulled in.
EASY INSTALLATION: Installation is a breeze: install the beaded end of your clutch cable in to the lever arm. Mount the lever to your handlebars and adjust your clutch cable tension as needed- now you're ready to ride.
UNIVERSAL FIT: Designed to work with most standard 48cc, 60cc, 66cc and 80cc 2 stroke motorized bike engines..
PACKAGE INCLUDES: 1x Flying Horse 2-Stroke Bicycle Clutch Clever. Color & Appearance May Vary.
