Best Springfield Taper Lock Bushing

TB Woods Type QT QT15/16 Sure-Grip Bushing, Inch, 0.9375\ Bore, 1.625\ OD, 1.25\ Length, 1750 lbs/in Torque, Standard Design, Standard Keyway

  • Quick disconnect bushing with a torque capacity of 1,750 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Steel for greater strength and shock resistance than cast iron.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with quick disconnect bushings from various manufacturers.
Check Stock

TB Woods Type JA JAM14MM Sure-Grip Bushing, Metric, 14 mm Bore, 34.9 mm OD, 25.4 mm Length, 198 lbs/in Torque, Standard Design, Standard Keyway

  • Quick disconnect bushing with a torque capacity of 198 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with quick disconnect bushings from various manufacturers.
Check Stock

TB Woods Type SH SH118 Sure-Grip Bushing, Cast Iron, Inch, 1.125\ Bore, 1.871\ OD, 1.25\ Length, 3500 lbs/in Torque, Standard Design, Standard Keyway

  • Quick disconnect bushing with a torque capacity of 3,500 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Cast iron for resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Lifstar 2-1/2-inch Diameter Nylon Pulley, Rope Pulley for Outdoor Clotheslines - Fits 1/4-inch Rope, 4 Pieces

  • 5.95" OUTSIDE DIAMETER , FITS 1-1/8" SHAFT DIAMETER. 1/4 KEYWAY IS STANDARD FOR 1-1/8" SHAFT, 182T & 184T FRAME MOTORS. KEYWAY NOT INCLUDED..
  • THIS CAST IRON DOUBLE GROOVE PULLEY TAKES 2 BELTS AND INCLUDES THE " H " STYLE TAPERED BUSHING..
  • GROOVES WILL FIT THE FOLLOWING V-BELT TYPES ( 3/8" TOP WIDTH 3L / 3LK) (1/2" TOP WIDTH 4L / 4LK / A / AK / AX ).
  • THE TAPERED BUSHING LOCKS ONTO YOUR MOTOR SHAFT AS YOU SCREW DOWN THE LOCK SCREWS, RESULTING IN A SUPER TIGHT INDUSTRIAL TAPERED LOCK..
  • MOTOR PULLEY IS MADE OF CAST IRON, THE H BUSHING IS MADE FROM C45 STEEL WITH BLACK OXIDE FINISH..
Check Stock

Clarostat 100K OHM MODPOT Linear Taper Potentiometer 1W 1 Watt 10%

  • .25″ “Flat D” shaft diameter, .35″ (9.5mm) length to allow for a knob if desired.
  • Shaft Length: 22mm (7/8″), Bushing Length:12.5mm (0.50″), Total Shaft Length 1.50″.
  • Body is .63″ square, Mounts in a .375″ hole.
Check Stock

Wilmad-LabGlass LG-9444-106 10mm PTFE Stirrer Bearing, Standard Taper 34/45

  • Complete assembly includes PTFE stirrer bearing, PTFE bushing, saddle O-ring, threaded heavy wall glass adapter, and top cap. See LG-9501 for polished stirrer rods or LG-9502 for stainless steel rods.
Check Stock

Set of Four (4X) Bourns 500K SHORT Split Shaft Audio Taper Low Friction Potentiometers

  • SET of 4 500K Split Shaft Audio Taper Pots - 3/8" bushing.
  • Each pot comes with hardware - 1X Hex Nut and 2X Washers.
  • NOT FOR IMPORT GUITARS!! These pots are sized for use in U.S. made guitars..
Check Stock

Monroe Shocks & Struts Magnum Light Truck 550064 Shock Absorber

  • Robust hydraulic lock-out: Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly - on most applications.
  • PTFE coated bearing: Reduces friction during operation between the rod and rod guide, improving durability - on most applications.
  • Tenneco shouldered bushings: Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability - on most applications.
  • Nitrogen gas-charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration.
  • Loop welding technique: Provide up to 14,100 lbs. (6,395 kg) tensile strength for maximum durability.
Check Stock

Monroe Shocks & Struts Magnum Light Truck 550061 Shock Absorber

  • Robust hydraulic lock-out: Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly - on most applications.
  • PTFE coated bearing: Reduces friction during operation between the rod and rod guide, improving durability - on most applications.
  • Tenneco shouldered bushings: Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability - on most applications.
  • Nitrogen gas-charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration.
  • Loop welding technique: Provide up to 14,100 lbs. (6,395 kg) tensile strength for maximum durability.
Check Stock

Anvil 8700129854, Cast Iron Pipe Fitting, Hex Bushing, 2" NPT Male x 1" NPT Female, Black Finish

  • Hex bushing for connecting two pipes of different sizes.
  • Male National Pipe Taper (NPT) threads on the outside and female NPT threads on the inside for creating tighter seals than straight threads.
  • Made from cast iron for compressive strength and resistance to wear.
  • Hexagonal head for increased leverage and use with a wrench during installation and disassembly.
  • Black finish for corrosion resistance in oil and gas applications.
Check Stock