Remflex 3003 Exhaust Gasket for Ford V8 Engine, (Set of 2)
1-1/8 inch width x 1-1/2" height Stock Square Port.
Ford V8 - 302 ('81-'95), 351 ('69-'97) Windsor, 1-1/8" x 1-1/2" Square Port, Manifold or Headers, 2/Set.
Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
Remflex exhaust gaskets fill those gaps permanently.
There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Upower Dual Exhaust Tips 2.25 inch inlet 3 inch outlet 9.2" Long Vacuum Plating Blue 304 Polished Stainless Steel Weld on Staggered Exhaust Tailpipe Tips 2.25" to 3"(Pack of 2)
【Design】2.25 ID Weld On - Double Wall Angled Cut - Rolled Edge-Staggered-Offset Exhaust tips.
【Wide Application】Universal fits trucks pickup car with 2.25" INLET Exhaust Tailpipe Tips system. NOTICE: Before purchasing, Pls kindly check the size of your factory exhaust tip..
【1 Year Warranty】Pack of 2 dual exhaust tips.
No instruction is included. Professional installation is highly recommended..
J2 Engineering J2-CBE-035 Cat Back Exhaust System [Compatible with 90-99 Mazda Miata]
【FITMENT】Compatible with 1990-1999 Mazda Miata.
【Quality Construction】Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability. TIG welded CNC machine flange for resistance against pressure and corrosion..
【Enhance Performence】Dyno proven to instantly increases 15 – 25 horsepower / low end torque. Aggressive deep and smooth tone while ensures smooth exhaust gas flow, increase engine output and efficiency..
【Muffler & Diameter】Muffler tip type: rounded tip. Tip diameter (in): 4.5″. inlet/ outlet size (in): 2.25″. silencer included.
【Design】The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on your vehicle: lower auto exhaust back pressure and a much better sound..
AUTOSAVER88 Universal Black Exhaust Tip, 1.5'-2.5' Inlet 4' Outlet 9' Overall Length Stainless Steel Exhaust Tips Powder Coated Finish Tailpipe, Fit Pipes Diameter 1.5 - 2.5 Inch
Notice: Please measure the outlet diameter of your pipe prior before purchase this exhaust tip and it should not be larger than the inlet diameter of the exhaust tip (2.5 inches).
Dimension: Standard 1.5"-2.5" x 4" x 9" inlet,outlet, and overall length respectively. Universally compatible with vehicles which have exhaust pipes with an outlet diameter of 3 inches.
Not Just Make it Louder: Thicker inner wall design makes your vehicle sounds rumble and crackle, enjoy the driving pleasure brought by the sounds. Also the bolt-on design make it super easy to fastens to your exhaust pipe without any hassle..
Stylish Look: Stainless steel material made with powder coated black finish provides a stylish look for your vehicle instead of the rusted old tailpipe. Effective protect your tailpipe from dust, rain and rocks, also Prevent it from deformation and damage..
Daily Maintenance: To make this exhaust tip has a long-life service - Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).
AUTOSAVER88 Adjustable 1.5-2.0 Inch Inlet Exhaust Tip, 1.5'-2.0' Inlet 3.5' Outlet 9' Long Stainless Steel Exhaust Tips for 1.5'/1.75'/2' Outside Diameter Tailpipe, Bolt/Clamp On, Chrome
Notice: Please measure the outlet diameter of your pipe prior before purchase this exhaust tip and it should not be larger than the inlet diameter of the exhaust tip (1.15-2.0 inches).
Dimension: Standard 1.15"-2" x 3.5" x 9" inlet,outlet, and overall length respectively. Universally compatible with vehicles which have exhaust pipes with an outlet diameter of 1.5-2 inches.
Not Just Make it Louder: Thicker inner wall design makes your vehicle sounds rumble and crackle, enjoy the driving pleasure brought by the sounds. Also the bolt-on design make it super easy to fastens to your exhaust pipe without any hassle..
Stylish Look: Stainless steel material made with powder coated black finish provides a stylish look for your vehicle instead of the rusted old tailpipe. Effective protect your tailpipe from dust, rain and rocks, also Prevent it from deformation and damage..
Daily Maintenance: To make this exhaust tip has a long-life service - Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).
AUTOSAVER88 Adjustable 2.5 Inch Inlet Exhaust Tip, 1.0'-2.5' Inlet 3.5' Outlet 6' Long, Stainless Steel Exhaust Pipe Tips for 1.5'/1.75'/2'/2.25'/2.5' Outside Diameter Tailpipe, Bolt On, Chrome
Notice: Please measure the outlet diameter of your pipe prior before purchase this exhaust tip and it should not be larger than the inlet diameter of the exhaust tip (1-2.5 inches).
Dimension: Standard 1.0"-2.5" x 3.5" x 6" inlet,outlet, and overall length respectively. Universally compatible with vehicles which have exhaust pipes with an outlet diameter of 1-2.5 inches.
Not Just Make it Louder: Thicker inner wall design makes your vehicle sounds rumble and crackle, enjoy the driving pleasure brought by the sounds. Also the bolt-on design make it super easy to fastens to your exhaust pipe without any hassle..
Stylish Look: Stainless steel material made with chrome-plated finishing provides a stylish look for your vehicle instead of the rusted old tailpipe. Effective protect your tailpipe from dust, rain and rocks, also Prevent it from deformation and damage..
Daily Maintenance: To make this exhaust tip has a long-life service - Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).
Qiilu Tail Throat 2.5in Stainless Steel Tail Throat Luminous Exhaust Tip with LED Universal Auto Modified Parts Red
[ 304 Stainless Steel ] --- 100% high quality material.This exhaust tip is made of 304 stainless steel, which is more resistant to high temperature....
[ High Temperature Resistance ] --- Tail Throat is a brand-new high-quality after-sales product, more stable operation under high temperature....
[ Wide Application ] --- 63mm / 2.5in inlet, 89mm / 3.5in outlet, red and blue optional LED light color, universal exhaust end pipe, wide application,....
[ Illuminated Exhaust Tip ] --- Fashionable and dazzling, high temperature resistant LED lamp, there will be a blue flame effect after installation,....
[ Easy Installation ] --- ①Install theluminous tail throat with a buckle on the exhaust pipe of the original car②Adjust the position, tighten the....
