Metal Threaded Star Type Insert - Provided with a zinc plated finish. Metal star type inserts are designed to insert inside steel tubular legs.
Square Tubing Threaded Insert - As the threaded insert gets inserted into the tube, the star washer/clip flexes normally to bend in the direction of....
Threaded Inserts for Square Tube - External edges fit flush with the outside edge of the tubing for a clean, finished appearance.
Ruedamann 3'L x 28.3\ W,Holds up to 600 lbs,Wheelchair Ramp with Non-Slip Surface,Portable Aluminum Wheelchair Ramp,Folding Ramps for Wheelchairs,Home,Steps,Stairs,Handicaps,Doorways
【Size】Unfolded size: L35.8"(90cm) x W28.3"(72cm) x H2"(5cm). Folded size: L35.8"(90cm) x W13.8"(35cm) x H2.8"(7cm). It is suitable for putting in the trunk of the car, storing at home and carrying out. When using use vehicle or walk on only one side of our folding ramp, the other side will be lifted up a little. There are bolts with this ramp. You can fix the ramp with bolts through the holes on the extension plate of the ramp to the ground to avoid moving..
【Lightweight & Portable】Lightweight portable folding wheelchair ramp that make sure wheelchairs access over any stairs,steps,curbs,handicaps,doorways,etc. Aluminum alloy has high hardness, toughness and resilience, please use it with confidence. This wheelchair ramp is available for manual wheelchairs, trolleys, rollators and two wheeled vehicles (not good for motorcycles)..
【Sturdy Hinge】The hinge of the wheelchair ramp are more durable than ordinary hinges.Folding threshold ramp design for easy storage and transport.Please do not walk or pass through vehicles on the hinge in the middle of the ramp..
【Anti-skid & Durable】The ramp surface is covered with non-slip emery film, and non-slip rubber pads placed at the top of the wheelchair ramp for safety use and prevent slip from the usi....
PLATPORTS Skateboard Ramp Bike Ramp Skate Ramp RC Ramp BMX Ramp RC Car Ramp for Kids Jumping - Mini Ramp Skateboard Accessories for Boys and Girls
Pure fun: Perform bike ramp jumps and skateboard launch tricks and jumps with the Platports RAMP, a set of four skateboarding ramps connected by four slopes and a large tabletop connector. It is not your regular ramp. It brings at least 18 different configurations in one set. More configurations = more fun with this 10-piece ramp set!.
Performance training: Platports RAMP is perfect for practicing 180s, flip tricks on a 90° turn, plain straight launch tricks, table stalls and even for RC cars! The distance between the ramps gives enough room for ramp to ramp transitions while the center table provides plenty of space for catwalks, wheel hops, nose-wheels, etc. You can do more tricks with our Mini Ramp!.
Strong, sturdy, built to last: Each piece is made of non-recycled durable plastic and accompanied with galvanized and UV-resistant steel supports. Sturdy and textured surface for maximum traction, tabletop and slopes are supported by galvanized steel tubes, and can be secured firmly in place for optimal performance and safety with mounting holes (screws not included). Safety first!.
NEW slip-resistant safety feature: Innovatively designed,this new generation of Platports Ramp set comes with leg pads and rubber pads that creates even greater resistance t....
VEVOR Door Threshold Ramp, 6" Rise Door Ramp for Wheelchairs, Aluminum Threshold Ramp for Doorways Rated 800 lbs Load Capacity, Adjustable Threshold Ramp for Wheelchairs, Scooters, and Power Chairs
Threshold Ramp for Doorway: This 6" tall entry ramp allows for a smooth pass-by for doorways. The aluminum door ramp ensures you and your loved one walk up and down the threshold ramp securely and efficiently, especially for those who have difficulty independently accessing a home or vehicle..
Adjustable Height Ramp: Size: 32.15" L x 34" W x 6" H/ 81.7 x 86.4 x 15.24 cm. Usable height range of 0.75" -6.25"/ 1.9-15.9 cm. An adjustable flap attaches to the top of the ramp to provide 0.25"/ 6.35 mm of additional height. The 6 sections of the door threshold ramp can be attached or detached to achieve height adjustment for your different needs..
Aluminum & Non-slip Surface: Door ramp for the wheelchair is a durable all-aluminum construction. The anodized aluminum door ramp can be rust-proof and scratch-proof for indoor and outdoor usage. What's more, an extruded tread surface for superior traction reduces the risk of slipping..
800 lbs Load Capacity: Thickness: 0.12"/ 3 mm. A heavy-duty aluminum threshold ramp can support up to 800 lbs/ 360 kg. Front edge feet of 7.87"/ 20 cm....
Ruedamann 2'L×30.3\ W, 600 lbs Capacity Non-Skid Threshold Ramp, Portable Aluminum Folding Wheelchair Ramp for Home,Steps,Stairs,Doorways,with Bag
... x W13.8"(35cm) x H2.8"(7cm). Suitable for putting in the trunk of the car, storing at home and carrying out. Using height range is 2"-5.9"(5-15cm).Best recommended using height is 3.9"(10cm). Suitable for vehicles with width less than 25" (635mm)..
【Lightweight & Portable】Lightweight portable folding wheelchair ramp that make sure wheelchairs access over any stairs,steps,curbs,handicaps,doorways,etc. Aluminum alloy has high hardness, toughness and resilience, please use it with confidence. This wheelchair ramp is available for manual wheelchairs, trolleys, rollators and two wheeled vehicles (not good for motorcycles)..
【Sturdy Hinge】The hinge of the wheelchair ramp are more durable than ordinary hinges.Folding threshold ramp design for easy storage and transport.Please do not walk or pass through vehicles on the hinge in the middle of the ramp..
【Anti-skid & Durable】Non-slip rubber pads placed at the top of the wheelchair ramp for safety use and prevent slip from the using occasions.Welding of each part of the ramp makes the ramp with no noise and more durable than usual ramps. Compared with other iron rivets, our products use stainless steel rivets, which are more durable and not easy to rust..
Draw-Tite 36065 Trailer Hitch Drawbar Kit (Class II 1-1/4\) , Black
"fits 1-1/4"" square receiver tube openings".
drawbar measures 10 inches long with 5 inch rise.
fits 1-1/4 inch square receiver tube opening and has 3/4 inch ball hole.
high strength steel construction with a black powder coat finish, resistant to adverse weather conditions and corrosion, ensures they retain their attractive appearance for years to come.
rated at 300 lbs. tongue weight (tw) and 3,500 lbs. gross trailer weight (gtw), always consult your vehicle's owner's manual for actual weight capacities.
Drawbar measures 10 inches long with 5 inch rise.
Fits 1-1/4 inch square receiver tube opening and has 3/4 inch ball hole.
High strength steel construction with a black powder coat finish, resistant to adverse weather conditions and corrosion, ensures they retain their attractive appearance for years to come.
Rated at 300 lbs. tongue weight (TW) and 3,500 lbs. gross trailer weight (GTW), always consult your vehicle's owner's manual for actual weight capacities.
VEVOR Door Threshold Ramp, 1\ Rise Door Ramp for Wheelchairs, Aluminum Threshold Ramp for Doorways Rated 800 lbs Load Capacity, Adjustable Threshold Ramp for Wheelchairs, Scooters, and Power Chairs
Threshold Ramp for Doorway: This 1" tall entry ramp allows for a smooth pass-by for doorways. The aluminum door ramp ensures you and your loved one walk up and down the threshold ramp securely and efficiently, especially for those who have difficulty independently accessing a home or vehicle..
Adjustable Height Ramp: Size: 7.2" L x 34" W x 1" H/ 18.2 x 86.4 x 2.54 cm. Usable height range of 0.75-1.25"/ 1.9-3.2 cm. An adjustable flap attaches to the top of the ramp can be attached or detached to achieve height adjustment for your different needs. 0.25"/ 6.35 mm of additional height can be achieved..
Aluminum & Non-slip Surface: Door ramp for the wheelchair is a durable all-aluminum construction. The anodized aluminum door ramp can be rust-proof and scratch-proof for indoor and outdoor usage. What's more, an extruded tread surface for superior traction reduces the risk of slipping..
800 lbs Load Capacity: Thickness: 0.12"/ 3 mm. A heavy-duty aluminum threshold ramp can support up to 800 lbs/ 360 kg. Front edge feet of 7.87"/ 20 cm width can stably stand on the ground. Therefore, the ramp is great for the pass-by of wheelchairs, scooters, walkers, canes, and crutches..
Installation & Application: Our door ramp threshold needs no tools to assemble and disman....
BEJONI 67 x 8.7 Steel Loading Ramps for Truck & Trailer 950 lb Capacity Motorcycke Ramp Separated Ramp Kit for DIY Install 1 Pair
Unfolding size of loading ramp:67'' x 8.7'' x 1.9''(170cm*22cm*4.7cm). Folding size: 35.4'' x 8.7'' x 4.1''(90cm*22cm*10.5cm).Convenient for storage in our home and easy to carry out by our car, saving lots of space. Note: Please wear gloves when using.The recommended height range is 16.7"-19"(42cm-48cm)..
The side handle is fixed on one side. After retracting the ramp, The hole on the tension strap can be used as a handle through the raised lock on the other side, which is convenient to carry the ramp..
Packaging components: 2 loading ramps, 2 top support ramp kits, 8 mounting screws, 8 mounting nuts, 8 flat washers and 8 lock washers.After getting the heavy duty steel loading ramp, taking out all the accessories and install the top support ramp kit on the loading ramp. The sequence of washers is: install flat washer first and then lock washer.Confirm that the installation is firm before using the ramp..
The anti-skid design on the surface of the loading ramp can form strong traction and friction on the ramp surface. The back of the topboard is provided with EVA anti-skid pads, which can not only prevent the car from being scratched, but also form a certain friction force with the car to prevent slipping and falling..
[Sturdy & Non-slip] Lightweight wheelchair ramp with non-slip paint finish on the ribbed and high traction surface, the ramp is suitable for use in all weather conditions. Wide platform design for maximum support and stability. And the top transition plate adopts a rubber anti-skid pad, ensures the safe use of the ramp..
[Folding & Handle] Folded Size: 36''L x 14"W x7.87"H.
Unfolded: 72"L x 28.74" W x 1.97"H. Ramp Weight: 30.9 lbs..
[Safety] Durable and rust-proof aluminum construction, with the capacity of 600 lbs. The wheelchair ramp adopts stainless steel hinge, and the surface is flat, therefore, it can minimize the possibility of tripping over..
[Easy to Use] This convenient portable wheelchair ramp is easy to install. With the ramp, you will find it super effortless to push your mobility devices, such as wheelchairs and scooters, onto curbs, low stairs or garage..
[Quality Product with Warranty] Our portable Wheelchair Ramp comes with a 1-year warranty (damage caused by non-human factors)..
