Smraza for Raspberry Pi 4 Case, Raspi 4B Case with Cooling Fan 35MM, 4pcs Heatsinks, 5V 3A USB-C Power Supply for Raspberry Pi 4 Model B RPI 4 8GB/4GB/2GB/1GB
Only For Raspberry Pi 4 - Raspberry pi 4 model b case is made of acrylic, the RPI 4B case won't block Pi's Wifi or Bluetooth signal. Note: RPI board NOT included, and this case is not suitable for pi 3..
Easy to Access All Ports - It can be access to all ports of Raspberry Pi board, such as cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the microSD card..
Easy to Turn On/Off Your Pi - The 5V 3A raspberry pi 4 power supply with a handy on/off switch on the 59 inches cable. Control the power on/off of your pi 4 board through pressing the button..
Easy Installation with Buckle Design - 3-layer pi 4 case just need 3 steps to install. The buckle design makes it easier to install and disassemble..
Always Keep Raspberry Pi 4 B Cooling - Fan size: 35×35mm. The DC5V 2 pin quiet cooling fan and 4pcs heatsinks are good for heat dissipation of Raspberry Pi board..
GeeekPi Raspberry Pi Cluster Case for Raspberry Pi 4 Model B, Raspberry Pi Case with Cooling Fan and Raspberry Pi Heatsink for Raspberry Pi 3 Model B+, Raspberry Pi 3/2 Model B
Compatible with Raspberry Pi 4 Model B & Raspberry Pi 3 B+ & Raspberry Pi 3/2 Model B.
Access to all ports and slots of Raspberry Pi, including SD card slot, GPIO port, USB ports, HDMI port and so on..
The case includes cooling fans and heatsink for cooling down your Raspberry Pi better. The metal protective cover on the top will protect the cooling fan against being destroyed..
The stackable case can provide you with an environment to put four pieces of Raspberry Pi board together. The instruction manual will tell you how to assemble step by step..
Package Includes: 5x Acrylic Plates, 4x Cooling Fans with Metal Protective Cover, 12x Heatsinks for Raspberry Pi 3B+/3B/2B,16x Heatsinks for Raspberry Pi 4 Model B(Added on 2019.8.2), 1x Screw Set, 1x Screw Driver,1x Instruction Manual.
Miuzei Raspberry Pi 4 Touchscreen with Case Fan, 4 inch IPS Touch Screen LCD Display, 800x480 HDMI Monitor for RPI 4b 8gb/4gb/2gb with Touch Pen (Support Raspbian/Kali/Octopi/Ubuntu)- No Raspberry Pi
Raspberry Pi 4 Touchscreen – Raspberry Pi 4 Inch IPS full-angle display monitor, 800 x 480 physical resolution support HDMI input, refresh rate up to 60fps..
Orange Pi Touchscreen – Miuzei raspberry pi 4 monitor support HDMI audio output, data entry (computer, DVD), HDMI audio input, stereo 3.5mm audio output..
Raspberry Pi 4 Screen Case – Pi 4 inch touch screen compatible with raspberry pi 4 b/4b/4 model b. Display ONLY Support System – Raspbian, Kali-linux, Ubuntu, Octopi..
Touchfunction Support System – only support Kali, Raspbian, Ubuntu, Octopie. The 4 inch display monitor with touch control function (need to install touch drive), we offer pre-install driver system image file. could be used as standard HDMI output device for computer display (no touch function)..
Packaging Content & After Sales – you will receive raspberry pi screen, raspberry pi heatsink, 30mm cooling fan, screwdrive, awesome looking, it can make your lcd display case looks cooler than others. if you encounter any problems, you can contact us at any time, and we will answer you..
Smraza Raspberry Pi 4 Case, Acrylic Case for Raspberry Pi 4B with Cooling Fan 35mm, 4pcs Heatsinks, 5V 3A Power Supply for Raspberry Pi 4 Model B, RPI 4 8GB/4GB/2GB(RPI Board Not Included)
Only For Raspberry Pi 4 - Raspberry pi 4 model b case is made of acrylic, the RPI 4B case won't block Pi's Wifi or Bluetooth signal. Note: RPI board NOT included, and this case is not suitable for pi 3..
Easy Installation with Buckle Design - 3-layer pi 4 case just need 3 steps to install. The buckle design makes it easier to install and disassemble..
Easy to Access to All Ports - It can be access to all ports of Raspberry Pi board, such as cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the micro SD card..
Always Keep Raspberry Pi 4 B Cooling - Fan size: 35×35mm. The DC5V 2 pin quiet cooling fan and 4pcs heatsinks are good for heat dissipation of Raspberry Pi board..
Easy to Turn On/Off Your Pi - The 5V 3A raspberry pi 4 power supply with a handy on/off switch on the 59 inches cable. Control the power on/off of your pi 4 board through pressing the button..
Miuzei Case for Raspberry Pi 4, Raspberry Pi 4 B Case with Fan 30mm, Pi 4 Model B 5V 3A Type-C Power Supply for Pi 4 B case, 4 pcs Aluminum Heatsinks Support Rpi 4B 8gb/4gb/2gb (No Raspberry Pi board)
▶【Newest Raspberry Pi 4 Case】9-layer Acrylic Board With Good Nisibility. Miuzei Raspberry Pi 4B Case Perfectly Protects Your Pi 4 Board. You Can Check The Running Status of The Pi Board at Any Time as Well.
▶【Accurately Access All Ports】Miuzei Raspberry Pi 4 Model B Case Layered Design Reserves Enough Space for Pi 4 Model B So That Users Can Access All Ports Without Barriers.
▶【Advanced Cooling System】Raspberry Pi 4 Case with A Fan (35mm). Large Fan Has Better Heat Dissipation Performance Than Regular. Heatsinks Assists Raspberry Pi 4 To Heat Dissipation and Quickly Cool Pi 4 B CPU, GPU and RAM.
▶【5V 3A Type-C Power】Miuzei Raspberry Pi 4 B Case with A Power Supply Which 5V 3A Type-C Port and Has ETL Safety Certification. Pi 4 Power Supply Length 5 ft (1.5m) Without Risk of Overcurrent and Overvoltage.
▶【12-month Guaranteed】Miuzei’s Customers Can Get 12-month Warranty Service and Lifetime Technical Support. Any Doubt Just Reach Miuzei Team via Amazon Email or Support Email..
Geekworm Raspberry Pi Hdmi in Module, Hdmi to CSI-2 C790, Hdmi Input TC358743 Supports up to 1080p60fps Video & Audio Supported Compatible with Raspberry Pi 4B/3B+/3B/Pi Zero/W/2W/CM4
【Overview】This C790 Hdmi to CSI module takes the incoming HDMI signal and converts it into a separate CSI signal&I2S audio signal. ( Raspberry Pi 4 and Pi ZeRo only support 2 lan, max 1080P@50fps, and CM4 can support 4 lan, max 1080P@60fps).
【Compatibility】Compatible with Raspberry Pi 4 Model B, Raspberry Pi 3 Model B+/3B, Raspberry Pi 3 Model A+, Raspberry Pi 2 Model B,Raspberry Pi 1 Model B+, Raspberry Pi Zero/Zero W/Zero 2W, Raspberry Pi CM4/CM3 with IO board..
HDMI Input: supports up to 1080P60Hz on Raspberry Pi.
【Packing List】: ✔1 x HDMI to CSI-2 Module C790 ✔1 x FPC 15pin 1.0mm cable（15cm length） ✔1 x FPC 22pin 0.5mm cable（15cm length） ✔1 x I2S cable (15cm length).
ELECROW Sensor Kit for Raspberry Pi, Electronics and Programming Kit for Raspberry Pi Beginners
Raspberry Pi Starter Kit ---- These sensor kits for Raspberry Pi will be one of the best kits for you to get started with Raspberry Pi and Python!.
Compatible models ---- Crowtail-Starter Kit can be used with raspberry pi 4, 3B, 3B+, even Pi zero. (Raspberry Pi NOT included).
Detailed Tutorials ---- Electronic kit provides rich, interesting and open-minded courses, so that you can not only learn hardware and programming knowledge but also can distribute your thinking and guide you to think further..
Fun Modules ---- Crowtail Raspberry Pi sensor kit includes a Crowtail-Base Shield for Raspberry Pi and more than 22 modules which can be used for your creative Raspberry Pi projects..
Crowtail ---- Crowtail is composed of a series of open source electronic sensor modules. Each electronic module is composed of a circuit board with integrated sensors and a standard 4pin connection terminal. It can be used without breadboards and other complicated operations. It is convenient and quick to build a project..
Aoicrie for Raspberry pi Zero Camera Module 5MP 1080p OV5647 Sensor Video Compatible with Pi Zero Ribbon Cable&FPC Cable for Raspberry Pi Model A/B/B+,Pi 2 for Raspberry Pi 3,3B+ Pi Zero/Zero W Pi 4
for Raspberry Pi Zero CSI Camera Module with Fixed Focus Lens Camera module for Raspberry Pi, Fully compatible for Raspberry Pi A, B, B+, 2, 3, 3B+.Pi 4.Zero Zero W and 720p The camera is supported in the latest version of Raspbian,the for Raspberry Pi's preferred operating system.Work natively with all for Raspberry Pi models for your new project or drop-in replacement..
High-Definition video camera, The sensor itself has a native resolution of 5 megapixel. In terms of still images, the camera is capable of 2592 x 1944 pixel static images, and also supports 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 HD video recording.Easy plug and play type capability，Can be applied to image recognition and image tracking..
Both cables 2 cables included between the camera connectors for the Pi Zero and Model A&B series,The module attaches to for Raspberry Pi, by way of a 15 Pin Ribbon Cable, to the dedicated 15-pin MIPI Camera Serial Interface (CSI), which was designed especially for interfacing to cameras.15CM Golden Ribben Flex Cable for Raspberry Pi Zero Zerow, model: FPC.
5.90in/15cm and 19.68in/50cm white camera cable for Raspberry Pi Model A/B/B+, Pi 2 and for Raspberry Pi 4 3, 3B+, model: FFC.The C.
Connect the included ribbon cable to the CSI (Camer....
GeeekPi Raspberry Pi Cluster Case, Raspberry Pi Rack Case Stackable Case with Cooling Fan 120mm RGB LED 5V Fan for Raspberry Pi 4B/3B+/3B/2B/B+ and Jetson Nano (8-Layers)
Wide Application --- The new 8-layers cluster case is designed for Raspberry Pi clusters, Raspberry Pi NAS servers, Jetson Nano clusters, and disk array clusters to to provide shell protection and cooling solutions. It’s compatible with Raspberry Pi4B/3B+/3B/2B/B+, 2.5MM HDD, Jetson Nano (Note: Not for Raspberry Pi Zero).
Better Cooling Effect --- With 120mm 5V RGB LED Fan for better heat dissipation.
This case is open on three sides with each acrylic layer containing enough space for maximum air flow for each Raspberry Pi.
With a large fan on one side to flow strong wind for reducing the temperature of each Raspberry Pi.
Good compatibility with Raspberry Pi --- It can be access to all ports of Raspberry Pi board, such as GPIO port, HDMI port, USB port, SD Card slot and so on. It’s also compatible with the latest Raspberry Pi 4 Model B and Raspberry Pi 3B+/3B/2B/B+..
