KK YB-ZB 1pair Set(4 Spade Plug & 4 Banana Plug) HiFi OFC Speaker Wire, Spade Plug to Pin Type Plug 1.5M(4.92ft)/3M(9.84ft)/5M(16ft), KK YB-ZB (3M(9.84ft))
...ire), 50-foot, male to male Speakon cables are made for you. Whether you’re a touring musician, mobile DJ, or just a person with a passion for music, these Speakon DJ speaker cables will get the job done gig after gig with a crisp, clean sound that will help bring out the best in most any Speakon compatible sound equipment..
SPEAKER CORDS INSTALLED WITH RUGGED AND BUILT TO LAST LARGE 8.5MM RUBBER JACKET: These 50-foot Fat Toad Speakon speaker DJ cables are tough. Our Speakon DJ audio cables are encased with a thick and durable 8.5mm insulating rubber jacket. This durable insulating jacket not only helps protect your studio speaker cables from damage, but it also insulates them from outside static interference usually caused by electrical wires or other sound equipment..
STAGE SPEAKER CABLES WITH DURABLE TWIST LOCK SPEAKON TO SPEAKON CONNECTORS: Speakon connectors are quickly becoming the new standard for professional-grade equipment. With the 50-foot Fat Toad male to male Speakon speaker cable and your compatible equipment, you’ll be ahead of the game. The Speakon connector’s twist-lock design means no more accidental disconnections or disruptions in sound. And its blue and black connectors make it easier to find in an already crowded wire box..
Audio2000'S ACC31A1P2 4-Pack Speakon Male to 1/4\ TS Jack Adapters
...onal-grade, 12 AWG, 25 feet, ¼ inch TS male to male cables are made for you. Whether you’re a touring musician, mobile DJ, or just a person with a passion for music, these speaker cables will get the job done gig after gig with a crisp, clean sound that will help bring out the best in almost any compatible sound equipment..
SPEAKER CORDS INSTALLED WITH RUGGED AND BUILT TO LAST LARGE 8.5MM RUBBER JACKET: The 25 feet Fat Toad male to male ¼ inch speaker cables are tough. Our ¼ inch speaker cables are encased with a thick and durable 8.5mm insulating rubber jacket. This durable insulating jacket not only helps protect your wires from damage, but it also insulates them from outside static interference usually caused by electrical wires or other sound equipment..
PA CABLES WITH DURABLE 1/4 INCH MALE JACK CONNECTORS: The Fat Toad 25-foot ¼ inch speaker cable gives you the flexibility you need. Many pieces of pro-grade equipment are compatible with ¼ inch jacks. The 25-foot length thoroughly provides plenty of options for speaker placement.
DJ SPEAKER WIRE MADE FOR HIGH POWER AND DEMANDING APPLICATIONS : Most manufacturers recommend thicker cables for higher power and long-distance applications such as amp to speaker cable. These Fat Toad 12 AWG TS Male....
XLR Snake Cable 16 Channels 10FT by FAT TOAD | Patch Studio Stage Live Sound Recording Multicore Cords | Pro Audio Shielded Double-Sided Microphone Wires for Interface Hub DJ Digital Mixers Amps
...- 10FT LONG WITH 16 CHANNELS: Measuring 10 feet in length, this audio snake cable patch boasts high mechanical strength and includes 16 balanced female XLR connectors on the one end and 16 balanced, male 3-pin XLR connectors on the other..
1-YEAR WARRANTY – All products we sell from laptop stands, recording studio equipment, disc jockey accessories and dj stands, to stage equipment and stage lighting packages, and everything in between comes with our exclusive, 30-day money back return policy and a premium 1-year warranty! All you have to do is contact us within 30 days to request a return, or within 365 days from purchase to request a warranty replacement..
XLR Snake Cable 8 Channels 20 FT by FAT TOAD | Patch Studio Stage Live Sound Recording Multicore Cords | Pro Audio Shielded Female to Male Microphone Cables for DJ Digital Mixers or PA Amplifiers
...LE - 20FT LONG WITH 8 CHANNELS: Measuring 20 feet in length, this audio snake cable patch boasts high mechanical strength and includes 8 balanced female XLR connectors on the one end and 8 balanced, male 3-pin XLR connectors on the other..
1-YEAR WARRANTY – All products we sell from laptop stands, recording studio equipment, disc jockey accessories and dj stands, to stage equipment and stage lighting packages, and everything in between comes with our exclusive, 30-day money back return policy and a premium 1-year warranty! All you have to do is contact us within 30 days to request a return, or within 365 days from purchase to request a warranty replacement..
【High-quality wick】 The core performance is greatly enhanced, high brightness, stability and durability, long range, high color rendering..
【Life 2000 hours】Strong heat dissipation, low energy consumption, high-intensity reflector lamp cup, enhanced light gathering, solid material, longer service life..
【Safe and easy to use】 No mercury, no ultraviolet/infrared rays. Installation is time-saving, labor-saving, convenient and suitable for all conventional lamp holders..
【Wide uses】 You can use it for moving head lights, projectors, 7R sharp lights, 7R scanner lights, 7R follow spot lights, stage lighting, stage equipment..
LEDMALL Motion Snow Fall Full Spectrum Star Effects 7 Color White Laser Christmas Lights, and Decorative Lights with Remote Control
...een and Blue laser in proper ratios through advanced optics, to form star shape pinpoints.
7 nature's colors including white, pink, teal, blue, green, red, yellow, with rainfall motion Starry, Twinkle, Fading, Chasing and static effects mode, optimized for Outdoor Holiday Décor,decorative lights, Decorative Outdoor Lighting Projectors, full spectrum colors, and with speed control, also with flash or static of your choice.
For Color Quality, Please review the images and videos on detail page for effects of this lights before purchase,updated RF Remote control, with snowfall, rainfall motion and timer, with indoor Base stage and outdoor stake extension, With Timer setting 2, 4, 6 and 8 hours duration, moving controls and speed control.
Re-syncing Remote control maybe needed from time to time due to distractions, make sure remove plastic insulation from battery of remote.
to resync, press and hold on/off button for 5 seconds until lights flashes twice. Bulb uses Class 3R Classification or lower, Waterproof IP 65: IP65, PLUG and Play with long power cord with good range flexibility.
if needed resync the remote by unplugging lights, plugging lights back immediately press and hold button button until lights flashes off to resync..
...o a drummer. A must-have for portable studios, this rolling rack mount audio mixer stand also features special rubber feet that offer increased stability when the casters are removed..
HEAVY DUTY, ALL STEEL CONSTRUCTION MUSIC TABLE: Designed to safely hold your audio recording devices, studio gear, and digital music equipment, while keeping it easily accessible, this all-steel standing rack boasts two (2) heavy-duty, lock-and-pin adjusting systems: Select your preferred height (from 27.5" to 37") by adjusting the base support post or position the tilting mount platform in the best angle to suit your needs..
TILTING TOP MOUNTING PLATFORM TO GET PERFERCT ANGLE: Its extremely durable construction and sleek design make this rolling studio mixer stand the #1 choice for most music performers and audio professionals. The top mounting platform tilts at fixed angles to get your desired angle adjustment. Specs: Caster wheel size: 50mm x 17mm. Support base shaft: 1.375 inches x 1.375 inches. Leg spread area: 25.5 inches. Mounting platform: 16.875 inches W, 14 inches L. Weight capacity: 75 pounds..
1-YEAR WARRANTY – All products we sell from laptop stands, recording studio equipment, disc jockey accessories and dj stands, to stage equipment and stage lightin....
Rack Mount Rolling Stand & Adjustable Mixer Platform Rails by GRIFFIN | 19U Cart Holder for Music Studio Booth Pro Audio Recording Cabinet | Stage Equipment DJ Gear Storage Case for Amplifier Effects
KEEP YOUR AUDIO GEAR AND STUDIO RECORDING EQUIPMENT WITHIN ARM’S LENGTH. : Store all your outboard gear, amplifiers, or signal processors and keep them within easy reach of your auto locator or studio mixer with the help of this heavy-duty, all-steel, 19 spaces rolling rack mount stand. Its highly versatile design gives you plenty of options to help you arrange your DJ or stage gear according to your needs. Equipped with 4 durable, smooth-gliding caster wheels (two are lockable)..
ADJUST THE PRO AUDIO RACK RAILS ANGLE FOR MAXIMUM VISIBILITY: The top mixer platform features 10 space mounts and is designed to accommodate any mixer measuring up to 36 inches in width, 27 inches in length and 3 inch depth, or any unit that is oversized or otherwise not easily rack-mountable (up to 175 pounds without casters). Also, the special knobs on each side of the platform allow you to adjust the angle to your preferred position: entirely flat or slanted to allow for easier visibility..
AUDIO EQUIPMENT RACK STAND WITH 2 PADDED STRIPS FOR ADDED PROTECTION: To help you hold your expensive equipment safely in place, we have included two rail strip pads that you can easily apply on the top platform. Together with the metal lips located at the end of each platform arm, th....
Cable Matters 2-Pack Premium XLR to XLR Microphone Cable 15 Feet, Oxygen-Free Copper (OFC) XLR Male to Female Cord/XLR Cables/Mic Cable
Pro-grade microphone cord is designed for microphones or other professional recording, mixing, and lighting equipment with the 3 pin XLR connectors.
Convenient and cost-effective 2-pack microphone wire provides spare or replacement XLR cable (XLR male to female cable) to use on a set of microphones or on different systems.
Balanced Mic cable XLR with soft PVC jacket is constructed with oxygen-free copper (OFC) conductors for delivering pristine sound.
Copper braided shielding of these Mic cables provides maximum cancellation of hum and noise.
Polyethylene insulation improves high frequency response. Heavy duty metal connectors with molded strain relief and grip treads increase durability and help easy plugging and unplugging.
The Mic cord is compatible with equipment with 3-pin XLR connectors such as shotgun microphones, studio harmonizers, mixing boards, patch bays, preamps, speaker systems, and stage lighting with an XLR cable port.
Cable Matters 2-Pack Premium XLR to XLR Microphone Cable 6 Feet, Oxygen-Free Copper (OFC) XLR Male to Female Cord/XLR Cables/Mic Cable
Pro-grade microphone cord is designed for microphones or other professional recording, mixing, and lighting equipment with the 3 pin XLR connectors.
Convenient and cost-effective 2-pack microphone wire provides spare or replacement XLR cable (XLR male to female cable) to use on a set of microphones or on different systems.
Balanced Mic cable XLR with soft PVC jacket is constructed with oxygen-free copper (OFC) conductors for delivering pristine sound.
Copper braided shielding of these Mic cables provides maximum cancellation of hum and noise.
Polyethylene insulation improves high frequency response. Heavy duty metal connectors with molded strain relief and grip treads increase durability and help easy plugging and unplugging.
The Mic cord is compatible with equipment with 3-pin XLR connectors such as shotgun microphones, studio harmonizers, mixing boards, patch bays, preamps, speaker systems, and stage lighting with an XLR cable port.
