The 5 way PVC pipe fittings are commonly used to make center supports when covering a large area with a PVC structure. It is also useful to make bases for sprinklers, dog agility equipment and other stands..
All five outlets are non-threaded sockets.
Furniture Grade means this fitting has a non-marked, glossy finish..
DO NOT use these fittings for plumbing projects..
1-1/2″ Fittings fit on 1-1/2″ Schedule 40 PVC or Furniture Grade PVC. Please check out our PVC Sizing Guide (Specification Sheet) to make sure that you order the correct size PVC Fittings. PVC is NOT measured by the outside diameter, and doing so will result in receiving fittings that are too big for your pipe..
Bswox Bottle openers,Bottle Opener with Magnetic Cap Catcher - Pop Can Opener – Stick to Refrigerator for Easy Storage to Avoid Loss - Easy Picking-up
SIZE - 1/2" Steel Pipe, 30 Inches (76.2cm) long, set of 6. LIGHTWEIGHT pipes, used for HOME DECOR. Compatible with NPT 1/2" fittings..
NOTE - These pipes are PAINTED BLACK, if protective painting at both ends makes pipes hard to screw into fittings, please remove the black painting. (Use knife to cut along thread) The pipe does NOT work with pipe clamps. O.D. of these pipes is smaller than the NPT 1/2" pipes. (O.D. of these pipes: 20.2mm.
HOW TO USE - Unleash Your Creativity and bring chic, industrial style into your home, office，garage, workshop or any other space with fittings and pipes.
choose from our large selection of standard, unique and innovative fittings and pipes to create custom furnishings limited only by your imagination..
MORE CHOICES - Please find more fittings and pipes from our store, we offer the most comprehensive range of fittings and pipes to meet ALL your needs. You can also find standard NPT 1/2.
(Combo Pack) Exact Replacement Rotating Rigid Pipe Adapter and Termination Adapter (Black) - With 3” Hub and 3” Bayonet Lug Fittings
COMBO PACK 2-PIECE PIPE ADAPTERS - Inside is 1 piece rotating rigid pipe adapted and 1 piece termination adapter. Both are black and manufactured according to OEM specifications.
ROTATING RIGID PIPE ADAPTER - This is an RV waste outlet adapter that rotates for a quick connection. This is a standard-sized 3-inch RV twist-on adapter with bayonet hooks that connects the waste outlet to a 3-inch pipe.
TERMINATION ADAPTER - Designed for drain fittings connecting to a sewer hose or cap. One nub end supports a 3-inch twist-on connector with bayonet hooks while the female slip hub end accepts 3-inch ABS pipes that require gluing.
3” HUB AND 3” BAYONET LUG FITTINGS - The rotating rigid pipe adapter has a 3-inch female slip hub and 4 bayonet hooks while the termination adapter has a 3-inch female slip hub and 4 bayonet lug nubs fittings.
MADE OF BLACK ABS PLASTIC - Ensure that you are using the correct type of glue when connecting either an ABS or PVC pipe to the adapters’ female slip hub.
Pipe Décor Desk Outside Leg Set, Authentic Industrial Pipe, Unfinished Dark Grey Black Steel for Rustic Look, Classic H Design, 28.75-in H x 21.5-in W, 3/4-in Diameter, 2-Pk
...5-in diameter, assembled leg specs 28.25-in tall and 21.25-in wide.
Includes 2 “H” table legs comprised of (4) 3/4-in x 8-inch pipes, (4) 3/4-in x 18-in pipes, (2) 3/4 -in x 16-in pipes, (8) 3/4-in round flanges, (4) 3/4-in tees, (16) screws, instructions, and a clean and seal sheet.
pipes and fittings are industrial grade malleable iron and come in a standard steel grey color, commonly known as black within the plumbing industry.
PIPE DECOR genuine industrial pipes and fittings will stand the test of time.
You will know Pipe Décor parts and accessories when you hold them, beauty and beast, strength and style.
easily customize your PIPE DECOR projects with our many sizes of pipes and fittings.
PIPE DECOR pipe and fittings are coated with a light industrial grease to prevent rusting.
we highly recommend that you clean and seal each piece, before assembly, to ensure that they stay rust-free.
sealing the pipe with polyurethane spray will protect it from rust and scratches.
SharkBite 1/2 Inch Disconnect Tongs for Push to Connect Brass Plumbing Fittings, U711
SHARKBITE REMOVAL TOOL: 1/2 inch disconnect tongs allow for brass push connect fittings to be disconnected from the pipe quickly and easily.
can remove or adjust push to connect fittings in tight spaces for easy disassembly.
COPPER, PEX, CPVC, CTS, HDPE: SharkBite disconnect tong is compatible with copper tubing, CTS, CPVC, HDPE, and PEX fittings, and connects all three types in any combination, ideal for working in tight work spaces.
DURABLE AND HIGH QUALITY: Fitting remover is made with durable stainless steel and wide grip handles by a name you know and trust.
SharkBite's quality and performance are field-proven and trusted in the plumbing industry.
PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.
Legines Brass Pipe Fitting Long Nipple, 1/8' NPT Male x 1/8' NPT Male Extender Straight Connector, 1-1/2'Length 1200psi (Pack of 5)
Long nipple for connecting two threaded pipes and extending pipe length.
1/8" Male National Pipe Taper (NPT) threads for connecting to 1/8" female threaded pipes.
Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded..
Operating pressure of our fittings is up to 1200psi, more higher than other general fittings. Temperatures range from -53 to 121 degrees C (-65 to 250 degrees F).
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Da by 2 pcs 3/8 10mm Brass Tee Barb Fittings for 3/8 ID Hose,6 pcs Stainless Steel Pipe Clamps,3 Way Union Intersection for Water/Fuel/Air T
Packaging Includes：2 Brass hose barb tee fittings, they have three barb 3/8" x 3/8" x 3/8", 6 Stainless steel pipe clamps fit hose outer diameter of 13mm-19mm..
Material: Hose barb made of brass. Pipe clamps all components are all made of 304 stainless steel and will not rust..
Solid Connections:The T shaped hose barb can be solid connected to the hose（Fit hose witch inner diameter of 10mm）,The pipe clamps can create a tight seal on flexible or semi-rigid hose..
Characteristic: Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Stainless steel for corrosion resistance and will not rust, super sturdy..
Heavy T Shaped Brass Barbs and thickened wall, higher strength and very rugged..
FLKQC Wood Gluing Pipe Clamp Set, Heavy Duty Cast Iron Quick Release Pipe Clamps for Woodworking (1, 1/2\)
This Pex crimping tool meets the ASTM 2098 standard. Pex Crimping Set works with stainless steel clamps from any manufacturer to make PEX connections from 3/8" to 1"..
Our Pex crimp tool/Plumbing tools/Pex cutter/Hose clamp tool has perfect polishing provides no damage during crimping and avoids leaking..
It’s easy to switch cinch. And the ratchet design and self-release mechanism will make the cinch easy. The pex fittings pipe tool is factory-adjusted with no requirement for calibration tool..
This is a 5 in 1 pex pipe tool that can be used to crimp 3/8, 1/2, 5/8, 3/4 & 1" inch Stainless clamps. No Adjustment on the pex tool is needed to switch sizes..
Package Includes: 1pc - Red handle Cinch Crimp tool, 1pc - Red handle pipe cutter, 20pcs 1/2" and 10 pcs 3/4" Clamps set, 1pc Storage Bag..
Pipe Décor Desk Outside Leg, Authentic Industrial Pipe, Unfinished Dark Grey Black Steel for Rustic Look, for Classic H Design Desks or Tables, 28.75-in H x 21.5-in, 1-in Diameter, 1-Pack
flange specs 3.5-in diameter, assembled leg specs 28.75-in tall and 21.5-in wide.
Includes 1 “H” table leg comprised of (2) 1-in x 8-in pipes, (2) 1-in x 18-in pipes, (1) 1-in x 16-in pipe, (4) 1-in round flanges, (2) 1-in tees, (8) screws, instructions, and a clean and seal sheet.
pipes and fittings are industrial grade black steel and malleable cast iron.
standard steel grey color, commonly known as black within the plumbing industry.
PIPE DECOR genuine industrial pipes and fittings will stand the test of time.
You will know Pipe Décor parts and accessories when you hold them, beauty and beast, strength and style.
easily customize your PIPE DECOR projects with our many sizes of pipes and fittings.
PIPE DECOR pipe and fittings are coated with a light industrial grease to prevent rusting.
we highly recommend that you clean and seal each piece, before assembly, to ensure that they stay rust-free.
sealing the pipe with polyurethane spray will protect it from rust and scratches.
Piutouyar 50 Pack 12MM Two Hole Strap U Bracket 304 Stainless Steel Rigid Pipe Strap Clamp Heavy Duty Tube Strap Tension Clip (1/2 Inch)
【SIZE】- Fit Pipe Diameter: 60mm/ 2.36".
Total Size: 107 x 18 x 60mm / 4.21" x 0.71" x 2.36" (L*W*H).
【MATERIAL】- Made of 304 stainless steel, strong rust and corrosion resistant for a long time use.
【USAGE】- Choose the corresponding inner height of the pipe clamp according to the OD of the pipe, determine the hole according to the hole dia and position of the pipe clamp, and lock the fastening screw. A layer of soft gasket can be placed on the inner side of the pipe clamp and the pipe fittings, the effect will be better.
【APPLICATION】- Widely used in plumbing, petrochemical, power supply, and other pipeline laying, fixing all kinds of pipelines on wood, masonry, or similar surfaces.
