Xuesong Digital Angle Finder Protractor, 2 in 1 Digital Level and Angle Gauge, 7 Inch / 200mm Stainless Steel Measuring Ruler with Large LCD Display for Woodworking, Crown Molding and Daily Use
2-in-1 electronic digital protractor ruler for measuring lengths and angles, both internal and external. Made with high quality stainless steel and with durable etched measurements..
【Digital Display】Large LCD Display easy to read..
【High Accuracy】 Measuring Range: 0~999.9°.
Accuracy ±0.3°, 360-degree measurement of internal and reverse angles. It is a good choice for most projects like woodworking, crown molding and daily use..
【Button Function】Short press ON/OFF to turn on 2 in 1. short press ON/OFF to shut off the LCD. Long press ON/OFF for more thane 3 seconds to shut off the whole system. *NO REVERSE ANGLE/DISPLAY FUNCTION..
With hold function to store measured angle in memory and zeroing button to reset angle finder tool at any time. Automatic power off after 5 minutes. Clear operating instructions provided on the package..
Digital Angle Finder Protractor 0-360 Degree T-Bevel Gauge & Protractor with Horizontal Vertical Bubble & Full LCD Display for Woodworking, Metalworking, Construction
High Accuracy：This digital angle finder allows a full range 0-360°to measure internal angle，external angle & Contra angle Measuring precision is ±0.5°, resolution is 0.05° .You can switch between degrees and minutes to Improve the measurement accuracy , meet your requirements for different accuracy..
Four Large Control Buttons: Pressing hold button on the digital angle finder to hold the measurement at any angle, it helps the users effectively record the angle values. In addition, including power on/off, read reverse angle, flip display, and clear readout..
Digital Sliding T-bevel: Turn the center knob to lock the angle, and use the protractor to copy any angle from 0 to 360 degrees, In addition, easily get 45 degree angle with a T bevel gauge..
LCD Display & Bubble Level: This highly protractor tool is equipped with a large LCD display for easy reading and integrates a steel locking knob for adjustment. There is a perfectly positioned bubble level on the end of the digital angle finder body to ensure the level before tracing any angles and making any cuts..
Worry Free Customer Service: We back each T bevel gauge with a free 1 year exchange service plus lifetime technology support, giving you complete peace of mind. Please don’t....
Digital Angle Finder Protractor 0-360 Degree T-Bevel Gauge & Protractor with Horizontal Vertical Bubble & Full LCD Display for Woodworking Metalworking Construction
High Accuracy：This digital angle finder allows a full range 0-360°to measure internal angle，external angle & Contra angle Measuring precision is ±0.5°, resolution is 0.05° .You can switch between degrees and minutes to Improve the measurement accuracy , meet your requirements for different accuracy..
Four Large Control Buttons: Pressing hold button on the digital angle finder to hold the measurement at any angle, it helps the users effectively record the angle values. In addition, including power on/off, read reverse angle, flip display, and clear readout..
Digital Sliding T-bevel: Turn the center knob to lock the angle, and use the protractor to copy any angle from 0 to 360 degrees, In addition, easily get 45 degree angle with a T bevel gauge..
LCD Display & Bubble Level: This highly protractor tool is equipped with a large LCD display for easy reading and integrates a steel locking knob for adjustment. There is a perfectly positioned bubble level on the end of the digital angle finder body to ensure the level before tracing any angles and making any cuts..
Worry Free Customer Service: We back each T bevel gauge with a free 1 year exchange service plus lifetime technology support, giving you complete peace of mind. Please don’t hesitat....
Gain Express Digital Protractor Angle Finder Level Inclinometer Magnetic V-Groove 0~360 Degree with Backlight
USEFUL 3-IN-1 DEVICE – This newest digital gadget features with protractor, angle finder and level in one measuring tool. Large and ultra clear....
WIDE APPLICATIONS – Great tool for automotive, wood & mechanical industries, machinery, medical fields and etc.
V GROOVE BASE – The V Groove base with strong magnets enables strong attachment over a curve or cylindrical magnetic surfaces such as metal pipeline....
CONVERTS ANGLE TO OTHER UNITS : Conversions between : 4 x 90˚ m/m : 1000mm/m, % : 100%, in/ft : 12in/ft. No more guessing or fuzzy conversion!.
ABSOLUTE & RELATIVE MEASUREMENT – The regular absolute measurement mode can only measure the angle against horizontal plane. This tool also features....
Suncala Digital Angle Finder Protractor with Zeroing and Locking Function, 7-Inch Stainless Steel Angle Finder Ruler
* QUICK AND ACCURATE READING - Digital LCD display for easy reading.
* MULTI-FUNCTIONAL MEASUREMENT - 2-in-1 device to measure both length and angle, metric and Imperial Scale.
* RESETTING & LOCKING - The ruler could be hold at any angles using the lock/open knob to adjust the tightness..
* DURABLE AND SIMPLE ON/OFF - Ruler made of stainless steel for durability, Could be well used into various fields besides of Angle ruler, Straight ruler and Square Ruler..
Can work more than 2000 hours with one piece of CR2032 coin battery(Included).
MUSIBO Protractor Angle Finder, Woodworkers Edge Ruler, T Square, T Ruler, Straight Edge inch Ruler,Multi-Function Angle Measure Tool Woodworking Metal Ruler Kit with Wall Hanging Storage Rack(13in)
MULTI-FUNCTION: MUSIBO woodworking protractors & ruler is a multifunctional device for length measurement and angle drawing. It can measure lengths and draw parallel lines at different angles and intervals easily, which will bring much convenience to your work. Each woodworking ruler is equipped with a wall-mounted storage rack, which make it easy to store. MUSIBO woodworking protractors & ruler is an indispensable tool for every woodworkers and mechanics.
HIGH PRECISION: The ruler tool can be adjusted from 0° to 70°, every 5° (plus 22-1/ 2°, 67-1/ 2°) has a steel ball to lock the angle firmly during the painting lines.
Any angle can be obtained by moving and rotating the ruler. The ruler has a total length of 13in, and the smallest scale is accurate to 1/32in. There are 104 serrated notches and 13 circular holes, The spacing of the serrations is 11/112in (approximately equal to 2.49 mm) and that of the round holes is 1in.
SIMPLE OPERATION: You can make the cross surface of the disc next to the edge of the board, then turn the ruler to get the angle you want. Adjust the nut to get the best feel. Place the tip of the pencil in the saw tooth notch and then move the ruler along the edge of the board to get different parallel lines. In short, you can ....
2 Pieces 6 Inch 15 cm Pocket Ruler Flexible Precision Stainless Steel Ruler with Detachable Clips Stainless Steel Pocket Clip Scale Gauge Ruler Metric British System
Metric and English Size: pocket ruler combines 2 scales of ruler in 1, English size scale and metric size or inch and centimeter size, engraved with a measurement of 6 inches or 15 cm.
Sliding Pocket Clip: stainless steel pocket ruler can be applied as depth or height measurement, accurate and portable to carry, meeting your various kinds of measurement needs.
Steel Ruler: the back of 6 inch ruler is engraved with a conversion table from inches to mm, which facilitates the conversion of various measurement data, offering you considerable convenience.
Easy to Read and Rust Proof: pocket ruler with clip is made of stainless steel material, not easy to rust and bend, can be applied for a long time.
Scale is carved on the pocket ruler making it clear for you to read.
Wide Application: metric pocket ruler is a practical tool for schools, offices, home schools, architects and engineers, making it possible to measure data anytime, anywhere.
Mr. Pen - T Square, T Ruler, 12 inch Metal Ruler, T Square Ruler, Drafting Tools, Architect Ruler, Set Square, Drafting Ruler, Tsquare, Truler, Architectural Triangle, Tee Ruler, L Square, Scale Ruler
..., anti-drop, anti-corrosion. Compared with other universal angle ruler, 3d square woodworking tools is more durable and longlasting. Even using it for drilling positioning, it still works well and would not break. Also with the fine polishing surface, angle ruler woodworking is comfortable in your hand..
【ACCURATE MEASUREMENT】Laser engraved marking makes the number embedded in aluminum material, so T square ruler will not wear out and never fade.With clear engraving metric scales, Aweohtle t square ruler is accurate and easy to read. 3D design, no need to flip the body when measuring, just slide to mark the left and right 45 degree angles.With 45°& 90°limit stop and 0-90° scale, aluminum angle ruler could allow you to mark the angle easily..
【WIDE APPLICATION】Woodworking square is suitable for three dimensional items: Square and Tubular, Hollow and Solid, aluminum Alloy, Wood, Stainless steel, Marble, etc. A wise choice for maintenance worker, carpenter, installer, construction worker, engineer..
【BEST GIFT】Super wood tools woodworking make the difficult tasks much easier. This multifunctional measuring tool is also the best choice as a Birthday gift, Chiristmas gift and any other festival gift. Get one for your father, husband, maintenan....
PREXISO Angle Gauge Magnetic, Angle Finder - Digital Level Electronic, Protractor Angle Cube Inclinometer for Woodworking, Table Saw, Construction, Masonry, Machinery, 0-360° Bright Backlit Display
2 Measurement Modes & 4 Units – Turn on the equipment to directly enter the ABSOLUTE measurement mode, and press the ZERO button to switch to the RELATIVE measurement mode.
This equipment fast measurement displays angles in degrees, %, mm/m and IN/FT.
Magnetic V Groove Base & Auto Reversible Display – The pocket angle finder features sturdy V groove edges, a strong magnetic base.
When upside down, the LCD display with backlight auto rotates, ensure fast and clear reading.
TIPS: If the angle gauge is used in an incorrect position (tilts diagonally over 30 degree), screen display ERROR to remind users to use correctly.
Accurate Angle – This angle finder tool measures, sets angles, and if a surface is level.
PREXISO angle gauge has higher resolution of 0.05°and higher accuracy of ±0.1°at 0°and 90 °, and ±0.2°at other angles.
The measuring range is 0 to 360° (4×90°), buzzer will alert when it’s within ± 1° to the horizontal or vertical position.
Compact Design & Calibration Function – Mini angle gauge fits in your pocket or the storage bag that comes included to protect the equipment surface from wear.
The equipment has been calibrated in the factory. In order to ensure lasting accuracy, the equipment also has calibration function, so ....
