Best Stainless Steel Flexible Pipes

TECHNICAL PRODUCTS No. 7 Rubber Plug for 1-1/4 Inch Pipe

  • Safely seal off in-ground plumbing lines during freezing conditions!.
  • Winter freeze plugs are used to plug your swimming pool pipes after they have been drained to prevent water from entering the pipes and causing freeze damage..
  • The rubber expansion plugs are non-corrosive construction made of heavy-duty nylon, stainless steel, and high quality rubber..
  • Simply screw plugs into all return and drain inlets after blowing out lines..
  • Features stainless steel bolts and washers and large plastic wing-nuts..
Check Stock

63 Inch Flexible Grabberable Pickup Tool, AUSAYE Retractable Claw Stick, Snake & Cable Aid, Use to Grab Trash Hairs & Drain Auger to Unclog Hair from Drains,Sink, Toilet & Clean Dryer Vents

  • 63 inch Spring Design: Drain clog remover tool is made of Stainless steel which is flexible to be bent for many shapes in order to reach to small strainers or pipes for cleaning action..
  • Size: 3” Red Grip - 2-1/2” Handle Spring - 63 inch Spring Loaded Cable – Shaft is approximately 0.75 Diameters at widest point - Claws/Prongs extends out 1-1/8” and spreads 1 inch – Lifts materials up to 1 Ib..
  • Less expensive and more environmental than toxic chemical drain cleaners.Save much time to call a plumber.
  • Soft enough to be bent in many kinds for strainers and pipes,the flexible barbed wand can easily grab & remove clustered hair, food, garbage, and other obstructions /debris..
  • Easy operate: just insert, push the handle, gently pull out to remove clog.Wide Application: Great drain tool for kitchen sink, toilets, washbasin, bathtubs, and sewers,flexes at P-trap where most clogs occurred.
Check Stock

EVIL ENERGY 2.0' Exhaust Narrow Band Muffler Seal Clamp Stainless Steel 2PCS

  • Joins 2.0 inch OD pipe to 2.0 inch ID pipe. Exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components such as pipes, mufflers, catalytic converters, headers, manifolds. Torque: 63 N·m. Package: 2pcs..
  • Connection Type: ID-OD slip fit connection with either straight or "Z" compression slit. This narrow exhaust band clamp commonly use on slotted pipes or stainless steel connection where disassembly for service is likely..
  • Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion. Material: 304 stainless steel strap and mild steel hardware, serviceability, durability and reusable..
  • Easy to handle and disassemble. Suggestion: Wrap the pipe with several layers of aluminum tape over the clamping surface to take up for slight out-of-round and help seal..
  • EVIL ENERGY provides stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and service..
Check Stock

‎DNA MOTORING ZTL-225SS 16 Pcs 2.25 Inches Stainless Steel DIY Custom Exhaust Tubing Mandrel Bend Pipe Straight & U-Bend Kit, Universal Fit

  • 【Universal Kit】Comes with 4 pcs Straight Pipes, 4 pcs 90 Degree Pipes, 4 pcs 45 Degree Pipes, 4 pcs 180 Degree U-Bends.
  • 【Specifications】16-Gauge Piping Walls.
  • 【Stainless Steel Construction】Made of High Quality Stainless Steel with Computerized Mandrel-Bends for Strength and Durability.
  • 【Easy To Use】Slip Fit Ends for Easy Installation, Provides Easiest Fabrication.
  • 【DIY Custom】Perfect Do-it-yourself Kit with Plenty of Options for your ,otorcycle, Automotive, Atv or Any Other Need you May Have.
Check Stock

Muzata 20Pack Round Vinyl End Caps 1 3/4 inch PVC Flexible Protector, Soft Rubber Cover for Furniture Foot Post Pipe Tube, M019

  • Protective - Carbon steel pipes are easy to get rust from the two sides of the pipe, for its coating/ painting on the two sides will be damaged easily. The vinyl caps can protect these ends by covering it, anti slip &tear, and they can also block water vapor to some extent..
  • Flexible - Made of high quality PVC, super soft &flexible. (Attention! The size in the title means they fit for the OUTSIDE DIAMETER of the pipes).
  • Easy to install - Just slip them on both ends of the pipes, and they will be firmly fixed to both ends of the pipe..
  • Multi-purpose - Suitable for covering posts, feet of furniture ,handrails, wrought iron pipes, tubes for indoor& outdoor uses..
  • Optional sizes - Round: 3/4”, 7/8”, 1”, 1 1/4”, 1 1/2”, 1 3/4, 2”. Square: 1”..
Check Stock

Dorman 904-272 Turbocharger Intercooler Hose for Select Ford Models (OE FIX)

  • Made of T6061 aluminum material, durable.
  • Include 8pcs in the package, use it freely.
  • Package Includes :2 x Straight Aluminum Pipes.
  • 2 x 90 Degree Silicone Hose + 6 x Straight hose.
Check Stock

The Forever Cap CCSS45R 4.5-Inch Stainless Steel Slip in Round Chimney Cap

  • STAINLESS STEEL CHIMNEY: Thanks to the end of the rain cover protective cap of the stainless steel flue cover tube, the flexible screw at the bottom will allow you to easily adjust the tightness and tighten it even more..
  • DESTINATION: ending of metal round chimney pipes.
  • protects the chimney duct from rain or snow,Rigid design and reliable mounting method ensures that the cap is as durable and aesthetic as a chimney capcap.
  • IMPROVE COMBUSTION:By not allowing the fumes go too fast out of the chimney this flue cover creates an even combustion of the burning material thus not only saving you money and fuel but also keeping the warmth longer inside..
  • UNIQUE MOUNTING METHOD: with no usage of tools needed, makes it a good solution for all chimney pipe endings.
  • VARIOUS SPECIFICATIONS : Round tube models with diameters of about 75mm to 250mm in are available.Very suitable for wooden stoves, fireplaces, smoke vents, furnace tubes, etc..
Check Stock

Bravex Tubing Bender Pipe Tube Bender Kit Refrigeration Ratcheting Hand Tool 1/4 to 7/8 Inch with Tube Cutter/Deburring HVAC Tool Refrigeration System Maintenance

  • Suitable Tube Sizes: 1/4“, 5/16“, 3/8“, 1/2”, 5/8“, 3/4“, 7/8”, the maximum bending angle is 90 degrees, supports reverse bend. Bends pipes in both “forward” and “reverse” configurations..
  • The pipe bender is made of 40Cr steel & 45# steel with high precision machining. The aluminum alloy tube bender heads (replaceable) are firm and durable, preventing pipe deformation. The super long handle increases the leverage, making this tool both convenient and labor-saving..
  • Comes with pipe cutter, suitable for cutting heavy and hard materials, such as thin stainless steel (thickness.
  • Also includes a deburring tool made of solid plastic structure and high-speed steel bald head. It can quickly, cleanly and easily enlarge the inner diameter of different pipes (such as copper, aluminum, PVC and stainless steel pipes)..
  • If the pipe crack when bent,try heating and cooling to soften the pipe,and it will make perfect bends. Applications:automobile maintenance, refrigerator maintenance, Hvac work, hydraulic systems, etc..
Check Stock

Lixada Drain Pipeline Inspection Replacement Camera Sewer Pipe Drain Inspection Camera Head Replacement for The 23mm Camera

  • --HIGH DEFINITION CAMERA: High-definition replacement camera for pipeline inspection systems, providing HD video and snapshot images for snake cameras..
  • --BRIGHT LIGHTS SOURCE: 12 bright LED lights provide illumination source, can be effectively used even at night..
  • --WATER-RESISITANCE: Waterproof stainless steel structure, very durable, you do n’t need to worry about using it in the sewer or rainy days..
  • --FLEXIBLE AND DURABLE TOOL: Flexible springs allow the camera to pass through curved pipes, which saves you a lot of time and effort and makes tasks easy..
  • --MODEL:Only siutable for 23mm camera diameter, comes with a protective cover, suitable for pipe diameter over 45mm..
Check Stock

Parker Hannifin 12-12-12 FT-SS Stainless Steel Female Tee Pipe Fitting, 3/4\ FNPT x 3/4\ FNPT x 3/4\ FNPT

  • T-shaped pipe fitting for connecting and branching three pipes.
  • Female National Pipe Taper (NPT) threads on run and branches for connecting male pipes.
  • Made from stainless steel 316 for strength.
  • Higher corrosion resistance than stainless steel 304.
  • NPT thread for compatibility with other threads.
Check Stock