Best Stainless Steel Pipe Clamps

DIY Your Odd Sizes Band Hose Clamp Assortment Kit 14 FT Straps with 10 Fasteners Large Long Adjustable Worm Gear Screw Hose Clamps Stainless Steel Duct Clamp Pipe Clamp Metal Strapping

  • Cost-effective: This stainless steel hose clamps assortment is a home improvement items you can make any sizes of metal clamps and save more from the price of pre-made worm drive hose clamps..
  • Quality Fasteners: Our band clamps will not be easily bent and stripped out when tightening. The min.ultimate torque is 58 lbf-in. The hex size of screw clamp is 5/16 inch..
  • All 304 SS: The 1/2" wide metal straps and 10 worm clamp fasteners are all made of real 304 stainless steel which are anti-corrosive, reusable and ideal for outdoor use. The screw is 304 stainless too, not carbon steel..
  • Easy To Use: Following the directions included, you will set up the adjustable clamp very fast. Connect the metal strap with hose clamp fasteners, get large hose clamp 10 inch 12 inch 14 inch 16 inch 18 inch 20 inch 24 inch 30 & 40 inch extra large!.
  • Widely Used: Our stainless hose clamp assortment set can diy hose clamps in min.2.5 inch and max.53 inch diameter for any pipe clamp duct clamp plumbing, metal strapping banding for round posts, segmented wood, muffler heat shield. It work better than long metal zip ties as it's easy to release and reusable for more projects!.
Check Stock

EVIL ENERGY 2.75 Inch 2 3/4 Butt Joint Exhaust Band Clamp Sleeve Stainless Steel 2pcs

  • Joins 2.75" OD pipe to 2.75" OD pipe. Butt joint band 2.75" exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components....
  • Exhaust coupler clamps are serviceable, durability and reusable. Aslo can be used to repair exhaust pipes. Wrap some exhaust heat tape on the exhaust....
  • Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion. No....
  • Material: 304 stainless steel band, zinc-plated flange bolt and nut, steel gasket, aluminum alloy I-block. Note: There is a flat face and arc curved....
  • EVIL ENERGY provide stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and....
Check Stock

3Pcs 4 inches Two Hole stainless steel U-shaped pipe card for Pipe, Greenhouse AssemblyFixing on Various Surfaces and Support Structures

  • Package included:3Pcs U-shaped pipe card.
  • Material:These Rigid Pipe Straps are made of good quality stainless steel, sturdy and durable ,anti rust and corrosion.
  • Easy to install:These u shape clamps are strong enough to hold your pipe or rod securely. Only need to cooperate with screws can be installed, convenient and fast. Mounting screws are not included here!.
  • Wide Application: Our u brackets could be used in pipe fixing on various surfaces and support structures, great for fixed pipeline with oil, water, gas medium in metallurgy, petroleum, chemicals, vehicles, ships, power hydraulic systems..
  • Our Advantage:These u shape clamps are strong enough to hold your pipe or rod securely. And they won't oxidize even exposed to harsh environment for a long time. So that you could use them without any worry..
Check Stock

INTBUYING Liquid Fill Machine Bottle Pack Seal 500ml Water Drink Coffee

  • 【Stainless Steel Filler】This is a liquid filling machine with one nozzle. It comes with a self-sucking pipe. Made of stainless steel and parts contacting with filling material are made of 304 stainless steel..
  • 【Adjustable Filling Parameters 】Filling capacity, filling speed can be adjusted according to your needs. The powerful and stable air cyliner makes filling fast and precise..
  • 【Two Operation Method】 With a foot switch. Automatic or manual mode can be selected according to your choice..
  • 【Clamp-type Connection】The self-sucking pipe,drip-proof nozzle and three-way valve is connected by clamps which is easy to be disassemnled and cleaned..
  • 【Application】Filling machine can be used for fill liquids flows like water such as milk, coffee, water, various drink beverages..
Check Stock

OhLectric OL-38707 High-Conductivity Ground Pipe Clamp - Made of Copper Alloy - Connecting Grounding Electrodes to Water Pipes Clamp - Non-Direct Burial Pipe Clamp - ½ Inch - 1 inch Pipe Range

  • TOP QUALITY: Constructed using premium quality copper alloy, these copper ground clamps are extremely durable with high strength and are built to last for a lifetime. Our pipe clamps are designed to fit and organize in a safe manner with the maximum flexibility to suit your needs!.
  • MULTIPURPOSE: These pipe ground clamps are an excellent choice for either clamping the pipes to the grounding electrode or you can even use these clamps to securely mount the pipes on walls. It can also be used for connecting bare wires to pipes or steel water pipe or tubing..
  • CORROSION FREE: The ground clamp for pipe can be attached to the grounding electrode and the pipe by the means of indirect burial with the screws provided. To prevent rusting, the screws are coated with zinc plated steel alloys which totally eliminates the chances of corrosion on the clamps..
  • SAFETY TESTED: All our products are certified by Culus for their safety and specification standards set by them. We follow every step to ensure all the housing rules and regulations are followed as we value customer satisfaction and safety more than anything else..
  • ADAPTABLE FIT: These pipe grounding clamps come in a variety of sizes which are well equipped for all wire ranges between 2-10. And also they support all....
Check Stock

Hose Clamps 304 Stainless Steel Single Ear Hose Clamp, 125Pcs (7-25.6mm) Crimp Pipe Clamps Assortment Kit 9 Sizes Ear Stepless Cinch Rings Crimp Pinch Fitting Tools (125Pcs with Pliers)

  • HIGH QUALITY- The single ear hose clamp is made of premium raw material 304 stainless steel and has good corrosion resistance, heat resistance, low temperature strength and mechanical properties. The hose clamp stainless steel 304 has good workability such as stamping and bending, and no heat treatment hardening phenomenon. This crimp clamp can be used for a long time..
  • 360° STEPLESS DESIGN- No bulge and gap in the inner ring of the stainless steel hose clamps. Narrow band design provides more concentrated sealing pressure. The special treatment of the edge of the clamp reduces the possibility of damage to the clamped parts. This ear clamp is light weight and obvious clamping effect..
  • WIDELY USED- Standard series of spring clamps are suitable for connection of pipe fittings.
  • Using hose clamp pliers can perfectly connect the pipe to the any brand of crimp pipe fittings or tubing..
  • SHARP PLIERS- The small head design allows for good access in a limited area without damaging the pressure points on the ear clamp. The hose clamp plier is sharp but won't damage, rubber handle grips for a sure hold the clamp. Great length on handles, strong and well built..
  • ONE-STOP SERVICE- High-quality, high stability. If you have any issues at all with this product, our cus....
Check Stock

InduSKY 30Pcs Hose Clamps 1/4-2 in (6-51mm) Adjustable Range 304 Stainless Steel Worm Gear Hose Clamps Assortment Kit for Fuel Line, Plumbing, Automotive, Dishwasher, Washing Machine, Pool etc.

  • ✔【What You Will Get?】 – The hose clamp kit comes with totally 30 pcs hose clamps with 6 size range, enough for your spare and replacement in daily life around you house, garage, lawn and garden..
  • ✔【304 Stainless Steel】- Made of heavy-duty high-quality 304 stainless steel, corrosion-resistant, sturdy, firm and reliable, will not rust and crack for long-term use..
  • ✔【Wide Adjustable Size Range】 - The stainless clamps include 6 different diameters steel hose clamps to adapt to different hoses:6-12mm, 10-16mm, 13-19mm, 16-25mm, 21-38mm, 27-51mm..
  • ✔【Easy to Operate】- Use a slotted screwdriver to loosen or tighten the screw of hose clips then adjust the size, Secures ducting tightly in place..
  • ✔【Function and Use】- These large hose clamps are locking secure and tight, widely used in securing hoses, pipe, cable, tube, fuel lines etc. Perfect to apply in automotive, industrial, boat/marine, shield, household etc. both indoor or outdoor..
Check Stock

Homagic Hose Clamps 39 FT Adjustable Stainless Steel Large Hose Clamp with 13 Fasteners Duct Clamps for Automotive Pipes Cables Tubes Heating Cooling

  • Longer: The total length is 12 m/39.4 ft, suitable for cutting and obtaining different sizes of worm clamps stainless steel, such as 3 inches in diameter, 10 inches, 20 inches, 30 inches, 40 inches, 50 inches, etc., and the maximum size can reach 150 inches in diameter.
  • More convenient: With the right tools, you can cut the length of the worm gear hose clamps you want, without wasting materials, and meeting the size requirements of different pipes at one time. With 13 fasteners, complete equipment.
  • More durable: These band hose clamps are made of high-quality 304 stainless steel. It can also be used outdoors and coastal areas. It is corrosion-resistant, waterproof and rust-proof. The sturdy material ensures that the adjustable hose clamp is durable and reusable.
  • More practical: The clamp is locked, and the design of the worm drive pipe clamp enables a large adjustable range, better sealing, and can solve many problems such as liquid and gas leakage.
  • Simpler: Installing metal strapping in accordance with the correct instructions will get twice the result with half the effort. Use a ....
Check Stock

Hose Clamp 10 Pack 304 Stainless Steel Adjustable 6-51mm Range Worm Gear Hose Clamp Fuel Pipe Clamps for Automobiles Pipelines and Mechanical Application

  • Durable Material: made of high quality 304 stainless steel, rust-proof, water-proof, corrosion-resistant, ​strong,Clamps are sturdy, durable and long lasting use..
  • Size Range-The hose clamp is flexible and extensible, with adjustable width, and the size range is from 6-51mm (1 / 4in-2in). The hose clamp width ranges from 8mm to 12mm, suitable for fixing pipes of various sizes.Fit Hose Diameter: 6-12mm, 9-16mm, 13-19mm,18-29mm, 27-51mm(5 sizes and 10 pcs)Handy and fulfill your multi needs..
  • Easy to use: use a screwdriver to loosen or tighten the screw of hose clips then adjust the size, Secures ducting tightly in place.enough for your spare and replacement in daily life around you house, garage, lawn and garden..
  • Widely used- Clamps are used in securing hoses, pipe, cable, tube, fuel lines etc. Perfect to apply in automotive, industrial, boat/marine, shield, household etc.These stainless steel hose clamps can be attached on hoses pipe joints to fittings to prevent liquid leakage..
  • We believe that our high quality Hose Clamp will exceed your expectations. If you have questions, please contact us any time. We will try our best to solve your problems..
Check Stock

Eastman 1 Inch IPS Pipe Repair Clamp, 3 Inch Length, Stainless Steel, 45185

  • PIPE REPAIR CLAMP: Pipe repair clamp tool is designed for use on steel, copper, and plastic pipes, and is perfect for providing repairs to the pipes which suffered puncture, pinhole, or split.
  • creates a positive seal that won't collapse on Schedule 40 PVC.
  • DURABLE: Pipe clamps are crafted from strong and sturdy 301 stainless steel for long-lasting reliability.
  • WHAT IS INCLUDED: Metal pipe clamp is equipped with a high quality rubber gasket that will not deteriorate, and includes galvanized iron lugs which protect against rust and corrosion.
  • SPECS: Pipe fitting clamp features a 1 Inch IPS connection, and can withstand temperatures of 20 degrees F to 180 degrees F.
  • PREFERRED BY THE PRO: Our tools and plumbing supplies are perfect for both home owners and professional contractors.
Check Stock