Best Stainless Steel Pipe Tubes

CG2-11 PIPE CUTTER MAGNETIC GAS MACHINE TORCH BURNER BEVELER CUTTING PIPE BEVELING ​MACHINE

  • 【Perfect Set】The set includes a heavy duty tube cutter, mini tubing cutter and an inner-outer reamer. It can not only meet your pipe cutting need, but also fast clean inner reaming and outer deburring needs. The pipe cutting tool is very suitable for cutting pipes of aluminum, copper, PVC, thin stainless steel tube..
  • 【Exquisite Craftsmanship】MATEWORK professional heavy duty pipe cutter is made of high-quality aluminum alloy & SKD steel with high hardness up to HRC52. It has 6 pieces of individual bearings allowing for increasing cutting speed. Precise rolling control makes every cut smoother and more accurate in pipe cutting. After many tests, the cutting capacity up to 3/16 to 2-inch outside diameter with the thickness of 1/6-inch..
  • 【Meet Your Needs At Any Time】Mini tubing cutter is Specially designed for small diameter tubes in confined spaces, cut through 1/8 to 7/8-inch outside diameter pipes with a maximum thickness of 1/10-inch especially for use in restricted areas where a complete turn is not possible, improve your work efficiency..
  • 【Deburring Tool】Pipe reamer has 3/16 to 1-5/16 inch outside diameter capacity. It can be quickly, cleanly and conveniently applied to the inner diameters of copper, aluminum, PVC and soft steel t....
Check Stock

Hongso Grill Replacement Part Kit for Charbroil TRU-Infrared 3 Burner 463346017 463242516 463367516 Gas Grill Stainless Steel Pipe Burner Heat Plate Tent Shield g466-0024-w1 Adjust Crossover Tube

  • 【Barbecue Replacement Set】Repair kit includes 3-pieces stainless steel grill pipe burners, 3-pieces stainless steel heat plates, 2-piece....
  • 【Fits For】Fits for Charbroil TRU-Infrared 3 Burner 463346017, 463242516, 463367516 Gas Grill.
  • 【Dimension & Material】► Stainless Steel Burner Tubes 14 3/4''(L), 3-pack, Original Parts Number g466-2500-w1.
  • 【High Quality Repair Parts for Grill】Replace the high quality stainless steel barbecue replacement parts to make your grill work like new, extend....
  • 【Please Note】Make sure you measure the size of your original parts and compare with ours BEFORE you order, if you have any other questions, please....
Check Stock

BTSHUB Exhaust Pipe Cutter Tool, 3/4' - 3' Universal Exhaust Tailpipe Tube Cutting Pliers with 15 Blades for On- and Off-Vehicle Use

  • High-Efficiency Pipe Cutter: Quickly remove old exhaust pipes with the Exhaust Pipe Cutters.
  • Chain tubing cutter allows you to cut pipes and tubes from 3/4 to 3 inches (19 to 76mm) in diameter with a 3mm thickness. Suitable for mild steel, galvanized steel, copper, and aluminum pipes.
  • Unique Design: 10 inches (25.4cm) cutting wheel link chain wraps around your pipe even in tight restricted areas.
  • Pivot design ensures your cutting blades touch the outer walls of your pipe for smooth cuts. There is a cutting wheel on each roller for smooth tracking..
  • High-Quality Blades: High-quality carbon steel cutting blades effectively cut through metal and plastic.
  • Each exhaust tube cutter wrench tool features 15 cutter blade wheels, only a 1/4 inch rotation is needed for a complete cut..
  • Easy to Use: Pipe cutter wrench design allows you to anchor and create leverage when cutting into your pipes and tubes.
  • Once your tubing cutters are wrapped around the pipe, squeeze lightly and turn to cut into the material.
  • Comfortable Grip: 9.3 inches (23.6cm) exhaust pipe cutting tool has 3.8 inches (9.7cm) rubberized handles.
  • Cushioned for comfort and non-slip security..
Check Stock

VEVOR Hydraulic Flaring Tool Kit 45° Flaring Tool Set Brake Repair Brake Flaring Tools for 1/4 -3/8 Brake Flare Tool with Tube Cutter and Deburrer Tube Flaring Tools for Copper Lines

  • Tube Expanding Functions: This hydraulic flaring tool is equipped with φ 1/4", 5/16", 3/8" expanding dies and adapters, including 45° flaring cone,....
  • Manual Hydraulic Mechanism: This hydraulic flare kit achieves the pipe expanding with a hydraulic mechanism. The hydraulic tool is designed with....
  • Pipe Cutting & Deburring: The flaring tool comes with a mini pipe cutter and deburrer, which can help to flare pipe. The cutter cuts tubes ranging....
  • Durability & Portability: The flaring tool is durable 40 CR steel, which is reliable and built to last. Besides, the flaring tool kit is stored in a....
  • Wide Application: This hydraulic flaring tool kit is suitable for expanding copper and stainless steel piping. It is an excellent tool for repairs on....
Check Stock

Aquasentials Long Handle Bath Brush (Clear Handle)

  • ...luding 10 PCS of 12 inches extra long straw cleaner brushes in 12mm diameter, Greatly work for cleaning your straws, Baby Bottles, Yeti, Tervis, Camelbak, Starbucks Cup, Hummingbird Feeders and others. Packed in one gift nice BEUICIRY bag..
  • 【THE QUALITY】 These Long Straw Brushes Made of top 18-8 food grade 304 stainless steel wire. With the long ,soft but Durable nylon bristles which it doesn’t leave a lot of fuzz behind in the pipe like Chenille pipe cleaners do which you need to take the trouble to get rid of it. End tip coating that can protective glass straws or soft tubes that does not scratch the inside, BPA free. .You can feel free to buy it with full confidence..
  • 【THE WIDE USAGE】 These Pipe Cleaners widely use with all various materials of Straws, Pipes, Tubes and all narrow-neck bottles, it also can be used to clean Contigo, Narrow Tube, Power Fan, Coffee Pot, Sink Drain, Hummingbird Feeder and other hard to access corners,holes..
  • 【THE USAGE METHOD】 These Straw Brush Cleaners are very easy to use. Simply insert it into the pipe, rotate it, remove and wash it. And it can reuse, it will be better to use with a little dish soap and warm water . If you do not use it , Pls Keep it in dry place. You can also simply put it in the top r....
Check Stock

Adjustable Hose Clamps Band Clamp – 304 Stainless Steel Air Duct Clamp with 14 Fasteners, Large Worm Gear Hose Clamp for Automotive, Pipe, Plumbing, Tube and Fuel Line (34.5FT, 14PCS)

  • DIY HOSE CLAMP - There are different size tubes in your life, when you choose our Band Clamp set, you can easily trim the hose clamp strap in length you need, then insert the fastener to reach the desired size, no more waste of any materials.
  • MORE SIZE OPTIONS - 34.5 FT 304 stainless steel duct clamp strap with 14pcs fasteners, suitable to cut and get your long large pipe clamp in different sizes, such as 12 inches, 14 inches, 16 inches, 18 inches and so on.
  • EASY TO USE - The worm gear hose clamp adopts the open structure of the inner and outer ring, you just need to adjust the size with screwdriver to loosen or tighten, fix the band clamp on the joint to provide sealing performance. The large air hose clamp can be applied to big size mufflers, automobile exhaust pipe, cables, tubes and so on.
  • DURABLE MATERIAL - Hose clamp kit is made of 304 stainless steel, strong rust resistance, water resistance, corrosion resistance, oxidation resistance, durable, which can be applied indoor and outdoor, such as in kitchen, bathroom, garden, boat and so on.
  • 100% SATISFIED - If you have any questions or concerns with your product, just contact us and we will replace the product or refund your order. Our team is always at your service..
Check Stock

AJinTeby Grill Replacement Parts for Nexgrill 720-0830H 720-0783E 720-0864 720-0864M 720-0888 720-0888N 720-0896B 720-0898 -Heat Plates Tent Shield Burners Grill Igniters 5

  • 【Fits Perfectly】Fit Nexgrill 5 Burner 720-0888, 720-0888N, Home Depot Nexgrill 4 Burner 720-0830H Gas Grill Models. Grill Tent Replacement for BBQ....
  • 【Dimensions】 Flame Tamers: L 14.6" x W 4.2" x H 1.3". Sturdy stainless steel grill replacement parts, easy to install and use, helps you cook....
  • 【Pakage Including】5pcs Heat Plates Shield, 5pcs Grill Burner Pipe Tubes, 5pcs igniter.
  • 【Superior Quality】- Grill burner tubes are made of heavy stainless steel to ensure long-lasting use, which will not erode to rust in a matter of....
  • NOTE: Please kindly check the size and shape of your grill parts before purchase.
  • Any questions about this order, please kindly contact us via Amazon....
Check Stock

Joyoldelf Portable Smoking Pipe Cleaning Tool – Stainless Steel 3-in-1 Scraper & Reamer, Bonus a Flannelette Pipe Pouch, Perfect for Scraping and Poking

  • Practical Pipe Cleaning Tool – This cleaning tool kit is common use to cleaning the pipe, such as hookahs, pipe, water pipe and shisha, etc. To offer your great smoking pipe experience..
  • Multiple Use 3-in-1 Pipe Scraper – Pipe scraper which is stainless steel material, including three parts, tamper, scraper, needle. Tamper use for loading of tobacco, tobacco flatten to help tobacco combustion, scraper use for scraping the inside of the pipe tobacco dust and soot, needle use for picking out soot for cleaning pipelines to prevent clogging..
  • Stainless Steel Pipe Reamer – Pipe reamer is well made of stainless steel material, perfect for reaming the bowl when cake becomes too thick, making scrape off some cake more evenly and more conveniently than normal blunt tool, to avoid affect the smoking taste..
  • Pipe Pouch – Bonus a flannelette pipe pouch, easy for storing pipe and pipe accessories, you can carry them go outside, very convenient, and can avoid missing some pipe tool and accessories..
  • Package and Joyoldelf Full Warranty – You’ll get 1 x Stainless Steel Pipe Reamer, 1 x Stainless Steel 3-in-1 Pipe Scraper, 1 x Pipe Pouch. We will offer you one year warranty and lifetime customer service, our warranties ensure you have a fantastic shopping exp....
Check Stock

BTSHUB Exhaust Pipe Cutter - 3/4 to 3 Inch Exhaust and Tailpipe Cutter Chain Exhaust Cutter Tool - 15 Blades for On- and Off-Vehicle Use

  • High-Efficiency Pipe Cutter: Quickly remove old exhaust pipes with the Exhaust Pipe Cutters.
  • Chain tubing cutter allows you to cut pipes and tubes from 3/4 to 3 inches (19 to 76mm) in diameter with a 3mm thickness. Suitable for mild steel, galvanized steel, copper, and aluminum pipes.
  • Unique Design: 10 inches (25.4cm) cutting wheel link chain wraps around your pipe even in tight restricted areas.
  • Pivot design ensures your cutting blades touch the outer walls of your pipe for smooth cuts. There is a cutting wheel on each roller for smooth tracking..
  • High-Quality Blades: High-quality carbon steel cutting blades effectively cut through metal and plastic.
  • Each exhaust tube cutter wrench tool features 15 cutter blade wheels, only a 1/4 inch rotation is needed for a complete cut..
  • Easy to Use: Pipe cutter wrench design allows you to anchor and create leverage when cutting into your pipes and tubes.
  • Once your tubing cutters are wrapped around the pipe, squeeze lightly and turn to cut into the material.
  • Comfortable Grip: 9.3 inches (23.6cm) exhaust pipe cutting tool has 3.8 inches (9.7cm) rubberized handles.
  • Cushioned for comfort and non-slip security. If have any item's quality problems, we will solve for you. We'd like to resend a new....
Check Stock

QWORK Tube Cutter Heavy Duty Adjustable 3-22mm 1/8inch-7/8inch Copper Aluminum Steel Tubing Pipe Cutting Tool

  • High Quality: Heavy duty zinc alloy construction, has good wear resistance, corrosion resistance, strong strength, can hold heavy duty cutting....
  • Cutting Size: Made from premium bearing steel, the blade can cut pipe diameter between 3-22mm(1/8inch-7/8inch), and it can offer quick and clean cut..
  • Wide Application: This tube cutter is suitable for cutting aluminium,copper, thin-walled stainless steel pipes and other thin pipe or tubes..
  • Easy Operation: Twist bolt can adjust the cutting pressure for clean cuts..
  • 100% Satisfied Service: Enjoy a smooth&worry-free return service within a month. Any questions feel free to contact us, we will try our best to help....
Check Stock