Easy to Install: Connecting hoses pre-installed in the stainless steel bar faucet to save much time under sink, DIY installation within 10 minutes.
Easy to Clean: The corrosion & stain resistant finish doesn’t rust nor discolor, just clean the bar faucet by soft cloth or sponge in daily use.
Suggested Combination: A modern stainless steel bar sink with glass rinser matches with the stainless steel bar faucet, find it by searching AS1514XSS.
Magic Stainless Steel Cleaner & Polish Trigger Spray - Protects Appliances From Fingerprints and Leaves a Streak-free Shine - 14 fl. Oz.
?? Bar Keepers Friend Stainless Steel Cleaner & Polish removes grime from stainless steel without damaging or dulling the surface. Use it to remove hard water stains from steel sinks and greasy residue from stainless steel appliances. The fast-acting spray cleaner covers large surface areas quickly and wipes away easily. Safe for use on stainless steel kitchen utensils, steel racks, and steel cookware. You can even use it as a stainless steel jewelry cleaner..
⚪BKF stainless steel cleaner removes dirt and grime and polishes appliances, without harming the stainless steel's protective coating. Use it as a kitchen stainless steel cleaner, on stainless steel shelving, racks, fixtures, hubcaps, and more. Spray the surface and wipe (for heavily soiled surfaces, use a damp non-scratch sponge or cloth to lightly scrub the area.
wipe surface dry and repeat the spray process if necessary)..
??With Bar Keepers Friend Stainless Steel Cleaner & Polish, you can clean and shine your stainless steel appliances in one step. All you need is a soft cloth (and a non-scratch sponge, for stubborn grim). The cleaner easily wipes away without leaving a film or residue. It contains no harsh chemicals, so it won't scratch or damage your stainless steel refrigerator or other ....
iexcell 850 Pcs M3 x 4/5/6/8/10/12/14/16/20/25/30 Stainless Steel 304 Hex Socket Head Cap Screws Bolts Assortment and Nuts Kit
425 Pcs M3 Hex Socket Head Cap Screws, Thread Pitch 0.5 mm, Thread Size Diameter 3 mm ( Range: 2.927 ± 0.053 mm ).
Material: Stainless Steel 304, High Strength and Anti-corrosion in Various Conditions.
Single Thread Size, Multiple Thread Lengths: The Thread Size Diameter of All Screws in This Kit is the Same 3 mm ( Range: 2.927 ± 0.053 mm ), Thread Lengths are Multiple from 4 to 30 mm: M3 x 4, M3 x 5, M3 x 6, M3 x 8, M3 x10, M3 x 12, M3 x 14, M3 x 16, M3 x 20, M3 x 25, M3 x 30.
1 Pcs Hex Key, Hex Size: 2.5 mm, to Drive These Screws Conveniently and Easily.
Material: Chrome-Vanadium Steel and Nickel Plated: Higher Strength and Anti-rust.
Package: 425 Pcs M3 Hex Socket Head Cap Screws, 425 Pcs M3 Hex Nuts and 1 Pcs Hex Key Come in a 15-grids Organizer Box, Organized Conveniently and Easily.
E-Z LOK Knife Threaded Insert for Hard-Wood Brass Thread Inserts M6-1.0 Internal Threads 0.500 Length Pack of 10
THREADED INSERTS FOR WOOD – E-Z LOK Thread Inserts for hard-wood are ideal for applications where stripping or thread erosion is possible. Perfect for furniture, cabinets, displays, and more..
PROPRIETARY KNIFE THREAD – E-Z Knife thread inserts provide superior holding power using a proprietary external “knife” thread to slice into the wood..
BRASS OR STEEL OPTIONS – Brass threaded inserts or stainless steel threaded inserts available. Stainless steel is recommended for particularly hard wood and anywhere corrosion resistance is needed..
FOR USE WITH APPLICATIONS – The E-Z Knife threaded inserts for wood are designed for use in hard woods such as oak, cherry, and maple..
STRONG THREADS MADE EASY – Easily installs with a screwdriver, bolt/jam nut, or an optional E-Z LOK drive tool..
E-Z LOK Knife Threaded Insert for Hard-Wood, Stainless Steel Thread Inserts 1/4-20 Internal Threads, 0.625' Length Pack of 10
THREADED INSERTS FOR WOOD – E-Z LOK Thread Inserts for hard-wood are ideal for applications where stripping or thread erosion is possible. Perfect for furniture, cabinets, displays, and more..
PROPRIETARY KNIFE THREAD – E-Z Knife thread inserts provide superior holding power using a proprietary external “knife” thread to slice into the wood..
BRASS OR STEEL OPTIONS – Brass threaded inserts or stainless steel threaded inserts available. Stainless steel is recommended for particularly hard wood and anywhere corrosion resistance is needed..
FOR USE WITH APPLICATIONS – The E-Z Knife threaded inserts for wood are designed for use in hard woods such as oak, cherry, and maple..
STRONG THREADS MADE EASY – Easily installs with a screwdriver, bolt/jam nut, or an optional E-Z LOK drive tool..
#14 x 4 Marine Grade Type 316 Stainless Steel Deck Screw Square Drive Bugle Head Quantity 500 Type 17 Wood Cutting Point 2-3/4 of Thread Length 14 Screw Diameter 4 Screw Length
HIGH QUALITY STAINLESS STEEL: These #14 Wood Screws (Drywall Screws) are high quality grade Marine Grade Type 316 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today..
Type 316 steel is an austenitic chromium-nickelstainless steel that contains between two and three percent molybdenum. The molybdenum content increases corrosion resistance, improves resistance to pitting in chloride ion solutions and increases strength at high temperatures. Type 316 Stainless is more resistant to corrosion than 18-8 stainless but not as strong. Ideal for Salt Water envirovments or chemical exposure environments..
Type 17 Point - This thread cutting screw is ideal for use with wood.
it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling.
Features a Bugle Head, and a Square drive to be used with a #3 Square Drive.
Size Number: #14 / Length of Screw is 4" inches with 2-3/4" inches of thread.
#14 x 5 Marine Grade Type 316 Stainless Steel Deck Screw Square Drive Bugle Head Quantity 100 Type 17 Wood Cutting Point 3-1/4 of Thread Length 14 Screw Diameter 5 Screw Length
HIGH QUALITY STAINLESS STEEL: These #14 Wood Screws (Drywall Screws) are high quality grade Marine Grade Type 316 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today..
Type 316 steel is an austenitic chromium-nickelstainless steel that contains between two and three percent molybdenum. The molybdenum content increases corrosion resistance, improves resistance to pitting in chloride ion solutions and increases strength at high temperatures. Type 316 Stainless is more resistant to corrosion than 18-8 stainless but not as strong. Ideal for Salt Water envirovments or chemical exposure environments..
Type 17 Point - This thread cutting screw is ideal for use with wood.
it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling.
Features a Bugle Head, and a Square drive to be used with a #3 Square Drive.
Size Number: #14 / Length of Screw is 5" inches with 3-1/4" inches of thread.
iExcell 1275 Pcs Metric M4 x 5/6/8/10/12/14/16/18/20/25/30 Stainless Steel 304 Hex Socket Head Cap Screws Bolts Nuts Washers Assortment Kit
✔ Includes 425 Pcs, 11 Sizes, Thread Pitch 0.7 mm, Thread Size( Diameter) 4mm, Thread Length From 5 mm to 30 mm, Hex Socket Head Cap Screws: M4 x 5, M4 x 6, M4 x 8, M4 x 10, M4 x 12, M4 x 14, M4 x 16, M4 x 18, M4 x 20, M4 x 25, M4 x 30.
Material of Screws: Stainless Steel 304, High Strength and Anti-corrosion in Various Environments.
✔ Includes 425 Pcs Thread Pitch 0.7mm M4 Nuts to Meet Different Applications.
Material of Nuts: Stainless Steel 304, High Strength and Anti-corrosion in Various Environments.
✔ Includes 425 Pcs Φ4 Washers: Add More Touch Area to Meet Special Condition In Some Cases and Protect Parts from Being Damaged.
Material of Washers: Stainless Steel 304, High Strength and Anti-corrosion in Various Environments.
✔ Includes 1 Pcs Hex Key, Hex Size: 3.0 mm, to Drive These Screws Conveniently and Easily.
Material of Hex Key: Chrome-Vanadium Steel, Nickel Plated.
✔ Package: These Screws, Nuts, Washers and Hex Key Packed In a Sturdy Easy-use Plastic Storage Case, Organized Conveniently and Easily.
uxcell Thread Milling Threading Tap M18 x 1.5 Metric Left Hand Machine HSS High Speed Steel 4 Straight Flutes Screw Tap H2 Tapping Machinist Thread Repair Tool
Tap Size: M18 x 1.5 metric thread, H2 thread tolerance grade, left hand (reverse) thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
High Speed Steel Tap: The metric tap is with high hardness and toughness, heat resistance and wear resistance. Features the base substrate without any coatings. Good for general purpose thread tapping..
Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc. Recommended feed rate: general steel: 6-15m/min.
Easy to Use: The thread tap is used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use or electric drill use is easy to cause breakage to the tap, so it is not recommended. Prone to chipping or breaking due to speed overload or non-vertical tapping..
