Best Stainless Stell Ball Valve

Hakka Brothers Sausage Stuffers and Sausage Makers 15L

  • Equipped with Two fill rates system , easy to use and quick.
  • All parts that contact food directly are reach up SGS food hygiene standard.
  • 4 different diameter S/S nozzle 2/3" inch(16 mm), 5/8" inch(22 mm), 1-1/4" inch(32 mm) and 1-1/2"inch(38 mm).
  • All Stainless Stell Sausage Stuffer (All Stainless Steel Base Plate, Cylinder, Stuffing Tubes & Canister. Piston includes an air release).
Check Stock

385311641 Water Valve Kit, Plastic RV Camper Toilet Valve Parts for Pedal Flush Valve Toilets Compatible with Sealand 300 310 311 320 and 321 Series RV Marine Toilet Flush Valve Replacement (1 Piece)

  • Quality material: this 385311641 water valve kit made of quality ABS plastic material, sturdy construction to prolong the serve life and performance of this rv toilet parts.
  • Nicely fix and fit your toilet's hardware.
  • Applied for: the rv toilet valve parts and flush ball gaskets are compatible with Sealand 300/ 310/ 320 RV, Camper, trailer toilets, very practical.
  • Easy to use: you just need to snap the rv flush valve in, secure with 2 screws, and reconnect water lines.
  • Make it easier on yourself if you don't have ample room behind your toilet and use a mirror (or your phone in selfie mode) so that you can see the back of the assembly.
  • Nice combination: you will get 1 x toilet valve, 1 x rv toilet ball seal replacement, 1 x hose clamp, 2 x stainless mesh filters and 2 x screws.
  • Warming tips: check part numbers to ensure proper fit.
  • During the installing the rv water valve, please insure to install button with the correct angle in case that being broken.
Check Stock

4 Way Gas Distribution Co2 Distributor Manifold With 5/16 inch Barb/Stem Splitter Beer Integrated Check Valves for Homebrew Beer Making Brewing Tool

  • ???? Gas Manifold, Machined from a single piece of aluminum with built-in check valve protects your shunt and prevents gas backflow..
  • ???? Designed with a 2-point screw hole on the top for easy installation to other equipment. 5/16″ threaded ports barbed inlet and 5/16″ barbed outlets..
  • ???? The distributor allows you to split the gas supply into multiple lines. Each line has its own shutoff valve. Chrome Plated valves with spring loaded Ball check valve. Run with 4 lines from one CO2 source..
  • ???? Due to the one-way valve mechanism, the pressure drop between the ball valves in these manifolds is approximately 2 psi. You will need to set the pressure on the regulator to 2 psi above the pressure required in the keg.).
  • ???? Made of prime aluminum, brass and stainless steel material, which is extremely durable. MONEY-BACK GUARANTEE -customer satisfaction is our #1 policy!. If you are not satisfied with our product or if you experience any issues, Please contact us.
Check Stock

POP SANITARYWARE Shower Only Faucet Set Brushed Nickel, Bathroom Rain Mixer Shower Head Set Wall Mounted Rainfall Shower System Single Handle Shower Trim Kit with Rough-in Valve

  • LUXURY DESIGN: Swivel ball allows you to adjust the angle of the showerhead to suit your preference..
  • ALL METAL MATERIAL: Solid brass rough-in shower valve body, Stainless Steel shower head and brass ceiling mounted shower arm..
  • cUPC CERTIFIED: ASME A112.18.1-2018/CSA B125.1-18 with 1/2" NPT thread on both shower arm and valve body..
  • INCLUDES: 8" Stainless Steel shower head, shower arm, shower mixer valve. California CEC list (1.8GPM 6.8L/MIN). CUPC certification, Products are in compliance with the following standard(s): ASME A112.18.1-2018/CSA B125.1-18.
  • LIFETIME LIMITED WARRANTY: Any product quality problem can be guaranteed within 5 years. The shower cartridge is permanently replaced free of charge..
  • IMPORTANT WARNING: Not compatible with other brand‘s shower faucet valve and cartridge. The old shower valve must be removed if install this kit..
Check Stock

Adjustable Phone Tripod, Phone Stand for Recording, Overhead Phone Mount, Tabletop Tripod for Cookie Decorating and Teaching Online Live Streaming and Showing Drawing Sketching Cooking Recording

  • ... and vertical shooting, and can be moved freely on desks, kitchen counters and other workbenches.
  • ✅ Excellent design:Tripod for iphone is made with High-quality solid aluminum alloy structure,The trapezoidal support base can provide stable and reliable support.High quality phone clamp telescopic rods are made of stainless stell, refuses broken.
  • ✅Flexible shooting angle: The head, gooseneck and the base are flexible, 1/4” head ball with 360 degree rotation provides your different angles as your wish to meet your different application scenarios like video recording, live streaming, baking, scanner.
  • ✅ Widely compatibility: Phone video holder Compatible with 2.5 to 3.95 In devices, such as iPhone 13/12 / Pro / Mini / iPhone 11/11 Pro / 11 / XS / XS Max / XR / X / 8 / 8P / 7 / 7P / 6s / 6 Samsung S10 / S9 / S8 / Note 10 etc. Head ball with 1/4" screw also compatible with Desktop Logitech Webcam C930e, C930, C920, C922x, C922, Brio 4K, C925e, C615, camera, action cam.
Check Stock

1/2 Stainless Steel Electric Solenoid Valve 12V DC Normally Closed

  • Constructed with industrial grade stainless steel, this valve is very durable and resilient, leak resistant, corrosion resistant, and optimal for higher pressure and temperature projects. It can be used with drinking water or other water projects, gasoline, diesel fuel, kerosene oil, natural gas, air etc..
  • This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves..
  • As with all U.S. SOLID products, this valve comes....
Check Stock

MASTERCOOL 81490 R134A Valve Core Remover Installer yellow gold 6.8 inch for Standard 5mm valve cores only

  • 100% U.S. designed, assembled and tested.
  • Designed for use of servicing valves in R134a systems with standard sized 5mm valve cores.
  • For high (16 mm) and low (13 mm) service port standard type valve.
  • Access and change valve cores while the A/C system is still filled with refrigerant. Overall diameter-1 1/4 inches, length, retracted- 4 3/4 inches,....
  • Stainless steel ball valve design and patented thread remover lets the user block off the system while changing the valves cores, allowing for no....
Check Stock

1 Stainless Steel Electric Solenoid Valve 110VAC Normally Closed Air Water

  • Constructed with industrial grade stainless steel, this valve is very durable and resilient, leak resistant, and optimal for higher pressure and temperature projects. It can be used with drinking water or other water projects, gasoline, diesel fuel, kerosene oil, natural gas, air etc..
  • This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves..
  • As with all U.S. SOLID products, this valve comes with a ONE YEAR WARR....
Check Stock

1/2 Stainless Steel Electric Solenoid Valve 110V AC Normally Closed VITON

  • Constructed with industrial grade stainless steel, this valve is very durable and resilient, leak resistant, corrosion resistant, and optimal for higher pressure and temperature projects. It can be used with drinking water or other water projects, gasoline, diesel fuel, kerosene oil, natural gas, air etc..
  • This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves..
  • As with all U.S. SOLID products, this valve comes....
Check Stock

3/4 Stainless Steel Electric Solenoid Valve 110VAC Normally Closed Air Water

  • Constructed with industrial grade stainless steel, this valve is very durable and resilient, leak resistant, and optimal for higher pressure and temperature projects. It can be used with drinking water or other water projects, gasoline, diesel fuel, kerosene oil, natural gas, air etc..
  • This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves..
  • As with all U.S. SOLID products, this valve comes with a ONE YEAR WARR....
Check Stock