Best Standard Conduit Elbows

Bessey VAS-23+2K Vario Angle Strap Clamp (Pack of 2) (2)

  • ...What You Get ]: 10 x conduit clamps, which fit for 2" / 50mm pipe, screw mounting hole diameter is 0.24" / 6mm, Hole Center Distance 3.6" / 90mm,total length is 3.8" / 96mm.For specific parameters, please refer to the dimension drawing in Figure 4..
  • 6️⃣[ High-quality material ]: The metal u clamp is made of high-standard stainless steel, which is strong and durable, and has the function of corrosion and rust prevention. Even if it is used to fix the pipeline for a long time, it will not be broken and has a long service life..
  • 7️⃣[ Advance Design ]: The steel u clamp adopts a special slot design, which makes it stable and not prone to deformation. The U-shaped double-hole design is stronger than other pipe clamps on the market. The use of superb manufacturing technology makes the surface smooth and free of burrs..
  • 8️⃣[ Multi-purpose ]: The conduit bracket is very practical and can be used for fixing pipes, used for fixing pipes of wood, masonry, stainless steel pipes, plastic pipes, and oil, water and gas media in power hydraulic systems. Used in metallurgy, chemical industry, vehicles, petroleum, chemical industry, shipbuilding and other occasions..
  • 5️⃣[100% Satisfaction Guarantee]: Jersvimc is committed to bringing a pleasant shopping ex....
Check Stock

The Lost Mage (War of the Wood Book 1)

  • UV sunlight resistant jacket, rated for temperature range of -30-Degree C to 80-Degree C, 60-Degree C Oil (-22-DegreeF to +176-DegreeF, 140-DegreeF Oil).
  • Conduit seals out water, liquids, abrasives, alcohol, coolants, corrosive fumes and gases, grease, mineral acids, petroleum oils, salt air and spray.
  • Accepts standard liquid-tight fittings for use with LFNC-B.
  • Ideal for wet and outdoor locations and direct burial.
Check Stock

(1 1/4\ Dia x 50 ft) HydroMaxx® Flexible PVC Non Metallic UL Liquid Tight Electrical Conduit Kit with 2 Straight and 2 Angle Fittings Included

  • Non Metallic Flexible Liquid Tight Conduit with 2 Free Straight and 2 Free Angle Fittings.
  • Liquid Tight Conduit Resists Corrosion, Oil and Water, Smooth Inside for Easier Wire Pulling.
  • Resists Crushing and Stretching,Outdoor Sunlight Resistant.
  • Integral Rigid and Flexible PVC Construction, UL Rating 140 degrees F.
  • Conduit is Flexible - Can be used in extremely Tight Quarters, Light Weight - Lower Installed Costs.
Check Stock

Klein Tools 935AB1V Level, 2.5-Inch Conduit Bending Level, 1 Vial, ACCU-BEND Level Eliminates Dog-Legs in Offsets and Saddle Bends

  • Thumb screw attaches level to conduit to help eliminate dog legs when bending.
  • Large, easy-to-read high-visibility vial.
  • High-visibility orange body is easy to see on conduit and at the jobsite.
  • V-Groove fits contour of conduit and pipe.
Check Stock

CableClear -DIY Kit : Behind Wall TV Wire Kit

  • Hide ugly TV cords quickly and easily inside new or existing stud walls. No special DIY skills are required and a holesaw, plum bob and insulation cone are included for easy installation..
  • Hose length is fully adjustable to suit all TV heights. Hides cables up to 3'4" (1.0m) inside the wall and Extension Kits are available for TVs mounted extra high..
  • 2" diameter hose enables TV cords to gravity-fed through, including power cords with standard wall plugs. No wire pulling rods are required. Additional cables can be added later without any hassle..
  • Super slim profile (5/32") enables TVs to be mounted super-flat for that clean, professionally installed look. No ugly painted conduits on the wall..
  • All components are manufactured to the highest quality standards and exceed the international UL94 standard for conduit safety ratings. SATISFACTION GUARANTEE..
Check Stock

Klein Tools 51606 Aluminum Conduit Bender Full Assembly, 1/2-Inch EMT, Wide Food Pedal, Benchmark Symbols and Angle Setter

  • 1/2-Inch assembled Aluminum Bender includes Klein’s unique Angle Setter technology for time-saving, repeated accurate bends.
  • Patent pending Angle Setter for use on 10-, 22.5-, 30-, and 45-Degree bends (adjusted for conduit spring back).
  • Bold cast markings and symbols make for fast, easy conduit alignment to make all bend types, including saddle and back-to-back bends.
  • Wide foot pedal provides excellent stability, leverage, and comfort.
  • Interior hook surface prevents conduit from rolling or twisting during bends.
  • Includes markings for 10-Degree, 22.5-Degree, 30-Degree, 45-Degree, 60-Degree and corresponding offset multipliers.
Check Stock

Klein Tools 85191 Screwdriver / Conduit Reamer Conduit Fitting and Reaming Screwdriver for 1/2-Inch 3/4-Inch and 1-Inch Thin-Wall Conduit

  • Reamer's hooded-blade design keeps tip from slipping out of screws, especially when tightening hard-to-reach conduit fittings.
  • Reams and smooths 1/2-Inch (13 mm), 3/4-Inch (19 mm), and 1-Inch (25 mm) thin-wall conduit ends to protect wire and permit correct installation of....
  • Reams both the inside and outside of the conduit at the same time.
  • Longer Cushion-Grip handle provides comfort and more torque for reaming.
Check Stock

Jonard Tools ROD-3316 Coated Fiberglass Fish Tape Duct Rodder with Accessory Kit 3/16 x 300

  • CONDUIT RUNNING: Lightweight and portable, this rodder unit is perfect for running conduit inside and outside conduit drops as well as home drops from the hand-hole box to a building.
  • VERSATILE USE: Used for light pole wiring, control wiring, or walker ducts and rod can be pulled horizontally or vertically.
  • NON-CONDUCTIVE: Made with a non-conductive fiberglass core with a yellow nylon coating for high visibility and flexibility.
  • HIGH TENSILE STRENGTH: Can withstand loads up to 200 kgf (441 lbf) for quick and easy pulling.
  • LIGHTWEIGHT & COMPACT: 22” X 17” X 7” (55.88 cm x 43.18 cm x 17.78 cm) and weighing 14.33 lb (6.5 kg) for easy transportation.
Check Stock

Klein Tools 51607 Aluminum Conduit Bender Full Assembly, 3/4-Inch EMT, 1/2-Inch Rigid, Wide Foot Pedal, Benchmark Symbols and Angle Setter

  • 3/4-Inch assembled Aluminum Bender includes Klein’s unique Angle Setter technology for time-saving, repeated accurate bends.
  • Patent pending Angle Setter for use on 10-, 22.5-, 30-, and 45-Degree bends (adjusted for conduit spring back).
  • Easy handling aluminum head is reinforced for added strength.
  • Bold cast markings and symbols make for fast, easy conduit alignment to make all bend types, including saddle and back-to-back bends.
  • Wide foot pedal provides excellent stability, leverage, and comfort.
  • Interior hook surface prevents conduit from rolling or twisting during bends.
Check Stock

Klein Tools 51605 Iron Conduit Bender Full Assembly, 1-Inch EMT and 3/4-Inch Rigid, Wide Foot Pedal, Benchmark Symbols and Angle Setter

  • 1-Inch assembled Iron Bender includes Klein’s unique Angle Setter technology for time-saving, repeated accurate bends.
  • Patent pending Angle Setter for use on 10-, 22.5-, 30-, and 45-Degree bends (adjusted for conduit spring back).
  • Heavy duty cast ductile iron has the durability needed on the job site.
  • Bold cast markings and symbols make for fast, easy conduit alignment to make all bend types, including saddle and back-to-back bends.
  • Wide foot pedal provides excellent stability, leverage, and comfort.
  • Interior hook surface prevents conduit from rolling or twisting during bends.
Check Stock