Weewooday 6 Pieces Nano Board V3.0 ATmega328P Without Cable Compatible with Arduino Nano V3.0 with Pin Headers Pin Unsoldered
What you will get: the package included 6 pieces of nano board V3.0 ATmega328P, each nano V3.0 ATMEGA328P improved version with 3 pieces of pin headers unsoldered.
ATmega328P chips: using Atmega328P-AU MCU, support ISP download, using the same chips ATmega328P and CH340 with the official version.
Mini nano board: this is a portable, complete, and breadboard friendly board.
It has everything that compatible with Arduino has (electrically) with more analog input pins and onboard +5V AREF jumper.
Input and output: each of the 14 digital pins on the Nano can be applied as an input or output.
USB connection: the Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27).
The power source is automatically selected to the high voltage source.
DORHEA 4Pcs for Nano V3.0 ATmega328P Nano Board CH340 5V 16M Micro USB Microcontroller Board with PIN Headers Pin Unsoldered Compatible with Electronics Development Board Nano 328P Nano 3.0
The Nano for motherboard can be powered via the Mini-B USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source..
The nano has 8 analog inputs,each of which provide 10 bits of resolution.By default they measure from ground to 5 volts, though is it possible to change the upper end of their range using the analogReference function. Analog pins 6 and 7 cannot be used as digital pins, some pins have specialized functionality..
It is a smallest, complete and breadboard friendly board. It has everything that board has (electrically) with more analog input pins and on board +5V AREF jumper, compatible with Windows, Mac and Linux operating system..
More breadboard space:Nano's got the breadboard-ability of the Mini USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND ）on one top, power and ground on the other..
This board is using the chips ATmega328P and CH340, not FT232, Support ISP download.
The perfect IoT node and building block for adding to Lo-Ra connectivity to low power wide area IoT devices.
Very long battery life - the latest low power architecture means the power consumption is able to go as low as 104uA for extended battery life. It is also possible to use the USB port to supply power (5V) to the board, so you can run the board with or without batteries.
Local storage - On board 2MByte Flash to facilitate data logging and Over-The-Air (OTA) functions.
Enhanced Security - credentials and certificates are stored in the boards crypto chip, an embedded secure element.
Powerful - The MKR WAN1310 is based on the Atmel SAMD21 microcontroller and a Murata CMWX1ZZABZ Lo-Ra module.
Digital Audio Optical Audio Switch 2 in 1 Out, SGEYR Digital Optical Audio Splitter SPDIF Toslink Switch Optical Switcher with IR Remote Control & Optical Cable for PS3 Xbox Blue-Ray HDTV
...o Optical Cable Splitter】Two ways of optical fiber SPDIF Toslink signals switch to one sets of optical fiber signal receiving device. Optical splitter makes with metal material for sturdy and anti-interference. Plug and Play. Powered audio optical splitter is more stable than passive SPDIF/TOSLINK splitter(Please supply power before use, or use a signal source to supply power). Comes with a 5V power adapter for stedy charging.
【Long Output Distance】Lossless sound quality transmission. Used optical fiber cable loss less the 0.2Db/m, Output distance is up to 40m/130ft. With Power Indicator LED, LED Clearly Indicate the Working State of the Splitter. Digital optical switches can be Selected via IR Remote Control(Included) or Button on the Switch.
【Support Audio Format】Optical cable splitter support LPCM2.0 / DTS / Dolby-AC3, 32kHz, 44. 1kHz, 48kHz and 96kHz. Optical fiber audio aplitter does not support 7. 1CH Dolby Digital Plus, Dolby TrueHD. Support Signal Retiming.
【Widely Compability】The input port work with two Optical audio signal, such as PS3, PS4, Xbox, Blue-Ray DVD, HDTV, STB, Xbox, TV box, DVD player, and More. The output work with one sets of optical audio signal receiving device such as soundbar/digital amplifer, digtal to analog ....
N N.ORANIE 6 Pack PCIE Riser Adapter Card for GPU Crypto Mining16X to 1X (6pin / MOLEX/SATA) with Led Graphics Extension Ethereum ETH Mining Powered Riser Adapter Card and 60cm USB 3.0 Cable
... high quality black solid capacitors to make the power deliver from graphics card more secure and stable. Build in electric circuit protector keep device away from over current, over heat and over voltage. WARNNING: If the PCIE X1 Connector Inserted Reversely, May Damage the Connected GPUs or PCIE Slots..
【3 POWER SUPPLY METHODS】3 power supply methods are used: SATA power interface, 6Pin power interface, and 4-pin interface power supply.Multiple power supply methods solve the problem of power mismatch. Reduces the power supply burden on the motherboard and can be freely selected according to the actual usage environment.(Please reserve 10W power supply for riser when configuring power supply).
【REDUCE MOTHERBOARD BURDEN】6-PIN PCI-E power to 15-PIN SATA power cable for direct connection to your power supply reduces the power burden on your motherboard and ensures maximum compatibility with your power supply. PCIE slot uses gold plated pins to enhance the stability of data transmission and effectively reduce electromagnetic signal interference..
【Stable solution】The 60cm USB 3.0 extension cable is soft and flexible, making it simple to position and route. The operating state is shown by three LED lights. The slot has a fixed buckle that makes ....
iFlight 3D Printed Case with BEC Board for NakedHero 8 Camera for Alpha C85 Pusher Protek25 Protek35 FPV Whoop Drone
iFlight BEC board with 3D Printed Case designed for NakedGoPro Hero 8 ,super light weight,makes your naked camera 8 lighter and easier to install on your drone.
BEC output voltage is 5V 2A,avoid the accident of power off which is caused by the insufficient power supply for the FC board.
Integrated stock buttons for GoPro, Power/Mode Button, Record Button, and LED to know the status of the camera. The pad is available for pilots to control the camera recording via the radio transmitter..
With the pluggable connector, which is easier to connect with your flight controller for power supply and recording.
About the setup on betaflight and the assembly guide,please check the second image and third image or the listing description.
Bluetooth Amplifier Board 25W+25W HF63 Dual Channel Audio Amplifier DC 10-25V Digital Amplifier Module with TDA7492P Chip
High Quality : The amplifier board adopts TDA7492P power amplifier chip, high quality electronic components and military grade PCB board, durable in use..
2 Channel : This board is designed with dual channel output, 25W left channel and 25W right channel, high transmission rate and good sound quality..
Bluetooth Connection : The amplifier board is designed with Bluetooth V2.1 module and power supply reverse connection protection, convenient and safe to use..
Application : This digital amplifier board is suitable for upgrading and refitting the idle sound box and DIY production. It is suitable for speaker of 4Ω, 6Ω, 8Ω, 16Ω (8Ω is the best)..
ACEIRMC 6pcs ESP8266 D1 Mini WiFi Dev Board ESP-12 ESP-12F NodeMcu Mini Module WeMos Lua 4M Bytes WLAN WiFi Internet Development Board Base on ESP8266 ESP-12F for Arduino
This is D1 mini , it is a mini NodeMcu Lua WiFi board based on ESP-8266EX..
D1 Mini NodeMcu Lua 4M Bytes WLAN WiFi Internet Development Board Base on ESP8266 ESP-12F for Arduino, 100% Compatible with WeMos D1 Mini.
11 digital input / output pins, all pins with interrupt / PWM / I2C / support 1 line (except D0).
1 analog input(3.2V max input). Micro USB connection.
WIFI development board,4M bytes.5V 1A switching power supply (switching power supply）onboard..
Our mini development board compatible with Arduino WeMos and can be programmed in the for Arduino IDE..
