Edge Banding Trimmer for All Directions, Edge Trimmer with Tungsten Carbide Blades (1-Pack)
Easy To Use - Works perfectly with no practice or experience, Pneumatic action allows the edge banding cutter to adjust to different thicknesses very easily. Makes edge banding a breeze, is very comfortable to use, will not cause palm fatigue..
Save Time - Using our edge banding tools can greatly reduce the time and effort to complete the work, no more utility knives or razor blades. This plywood edge trimmer tool makes it so easy!.
Sharp, Leave No Trace - The sharp tungsten carbide blades to make the trimmer cut smoothly and cleanly and leave a nice edge. Will not cause the problem of excessive cutting. Clean, tight incisions, no confusion or fuss..
Easy Conversion - Easy to disassemble and assemble! When you cannot slide the tool with the two jaws due to the special gap problem, you can take the veneer edge trimmer apart and use it on one edge at a time..
Cuts in Both Directions - The edge banding machine has four sharp cutting edges, which can trim forwards and backward. This is very suitable for trimming oak edge banding and is suitable for any project that involves installing ....
Gazoe Battery Cable Lug Crimping Tool 10-1 AWG, Heavy Duty Wire Crimper for Battery Wire Ring Terminals - HX-50B
【Lightweight】The use of high-strength aluminum alloy handle, significantly reducing the weight of the product, the use of more labor-saving. (Approx. 2.35 lbs.).
【Rotatable Crimp Jaw】 Secured by spring-loaded locking pins, available in 6 crimp sizes - 10, 8, 6, 4, 2, 1 AWG - (6mm²/10mm²16mm²/25mm²/35mm²/50mm²). The non-slip rubber coated handle of this tool makes working more effortless..
【Efficient】The non-slip rubber coated handle of this tool makes working more comfortable and effortless. Press the screw, rotate the crimp to the size you need and simply make a good crimp on the cable lug..
【High Reliability】The jaw is made by EDM wire cutting process for more durability and precision.The crimper body is made of high quality steel die-casting. They are subjected to strict quality inspection process before leaving the factory..
CV Joint Boot Clamp Pliers , Ear Boot Tie Pliers, Car Band Tool Kit, Automotive Hose Axle Plier CV Clamp Tool CV Joint Banding Tools for Most Cars with 3 Pair Clamps
◇ CV Boot Clamp Pliers : Use with any banding up to 2/5-inch (10mm) in width.
Suitable for ear-type hose clips found on a fuel hose, cooling system, and vacuum hoses.
Plier works on steering gear gaiters and fuel hoses on various brands of cars.
Can be used for working on Oetiker System hose clamps.
◇ High-quality : The CV Joint Banding Tool is made of quality stainless steel throughout, which is durable, corrosion resistant, oil resistant, high temperature resistant, and long lasting. The plier head is hardened and treated for higher hardness.
◇ How to Use : Wrap free-end clamps 3/8-inch or 1/4-inch roll band and clip around boot, thread band through clip to tool nose and through winding mandrel slot, place 1/2-inch ratchet wrench on winding mandrel and turn until tension is applied, rotate tool over boot bending band back onto clip to apply tension and cut.
To complete clamping, fold down remaining band tail band into clip and secure by tapping down clip ears clip.
We recommend double-wrapped band for added strength.
◇ CV Joint Boot Clamp Plier : Includes 3 X small clamps and 3 X large clamps. Made of stainless steel, they are very tough and can lock items very firmly. The locking teeth stop the tie at the....
Uvital Dual-Modular Network Cable Cutting Stripping Crimper, Cat 5 Stripper Crimping Tool RJ45 RJ12 RJ11 8P/6P Connectors Hand Tools for Cuts, Strips, and Crimps 2 type of plugs in 1
【Multi-purpose】Professional Cable Installation Crimper Tool for cable Clamping, Pressing, Stripping and Cutting. The crimp tool offers reliable, easy-to-use, and affordable solution to meet immediate cutting needs. Durably made from steel and finished in black oxide for high performance, it provides fast, reliable modular-crimp connector installation for voice and data applications..
【Professional network crimper】Works for 6/8 poles modular connectors,Multi-modular crimp tool for RJ45/RJ12/RJ11 connectors. This user friendly device works with any Ethernet or telephone cable, Built-in cutter and stripper..
⚒️【High Quality Material】Precision Crimping dies was made of high-carbon steel for Any Ethernet or Telephone Cable. Yellow and black grips enhance comfort, visibility, and allow quick identification..
⛏️【Application】Suitable for wire installation into network and telecommunication equipment..
⚙️【Sales Service】Worry-free 18-month replacement warranty,12-hour Customer-friendly Support Service..
SOLEILLUNE Battery Cable Lug Crimping Tool for AWG 10, 8, 6, 4, 2, 1 Terminals with 60Pcs 8Specs Copper Ring Cable Lugs Kit Heavy Duty Wire Terminal Crimper for Electrical Connectors
【LIGHTWEIGHT MATERIAL】The handle of the Wire Crimper tool is made of high-quality 6061-T6 aluminum alloy, with a lighter weight of only 2.35 pounds, which makes the crimping tool more convenient to carry and use. The head of the wire crimping tool is made of high-quality carbon steel with longer service life. The long handle of the battery terminal crimper wrapped with non-slip soft vinyl help you use less effort when crimping..
【ROTATE CRIMP DIES】The professional cable terminal crimping tools are available in 6 crimping sizes, 10, 8, 6, 4, 2, 1 AWG (Corresponding to 6mm²/10mm²/16mm²/25mm²/35mm²/50mm²), and use a hexagonal rotating crimp die which is retained in place with a spring loaded locking pin. Thanks to processed by Wire EDM Cutting, the crimp die is more accurate than the ordinary casting die or stamped die..
【EASY OPERATION】Open the handle of the crimper, then press the Lockpin and rotate the crimp jaw to the size you need, place the cable and lug, then pull strongly on the ratcheting wire terminal crimper to make a great crimp on the cable lugs. Finally, rotate the connector 90 degrees to another direction and repeat the previous step for secondary crimping. Crimping twice is more secure..
Glarks Up To 2.2mm Wire Rope Crimping Tool Wire Rope Swager Crimper Fishing Crimping Tool With 180Pcs 1.2/1.5/2mm Aluminum Double Barrel Ferrule Crimping Loop Sleeve Kit
♛【What You Get】: In this crimping tool set, it include a heavy duty fishing crimping pliers and 3 size 180pcs double barrel ferrule crimp sleeve set, they are well packed in a paper box..
♛【Durable Quality】: Made of high quality carbon steel, with black oxidation treatment on the surface form a dense layer of oxide film, you won't worry about corrosion and rust. rubberized non-slip handles for comfort..
♛【Crimping and Cutting】: It include 4 crimping positions 0.5-0.1mm, 0.1-0.5mm, 1.0-2.0mm, 2.2mm.
Fishing pliers Jaws come with two side cutters to cut steel cable precisely.
150Pcs crimp sleeve is 1.2mm, 1.5mm, 2mm..
♛【Product Feature】: Crimping tool with self locking mechanism design makes it more relax to provide optimum pressure, and the safety lock is easy way to keep you crimper close..
♛【Application】: Fishing crimping tool is made from high quality, come with 3 size crimp sleeve, can be widely used for wire rope, cable line dog leashes etc..
The perfect set for fast and simple tensioning and securing of CV boot banding strap..
CV boot clamp installer With a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively..
This tool is essential for fixing CV boots CV joint boot clamp plier set Heavy-duty pliers with steel jaws and formed handles for extra comfort in use..
Suitable for ear-type hose clips found on fuel, cooling system and vacuum hoses..
Can also be used for securing late model GM CVJ boot clamps..
Toolwiz Battery Cable Lug Crimping Tool AWG 1/0, 2, 4, 6, 8, 10 Ratchet Wire Cutting for Crimper Tools Terminal Wire Cable -Thickened and Reinforced the Metal Plate Battery Cable Crimper
【ROTATE CRIMP DIES】Toolwiz Wire Crimper Cable Crimp has 6 dies of 6/10/16/25/35/50 mm² ( 10, 8, 6, 4, 2, 1/0 AWG ), using rotating heads with a spring loaded locking pin to keep the heads. Please note that product dimensions are Metric 6/10/16/25/35/50 mm² (not AWG)..
【ERGONOMICS DESIGN】Anti-slip rubber coated handle for a more comfortable and saving labor work. Self-locking and releasing mechanic unit of Toolwiz battery cable crimping tool ensure high crimping quality when crimping repeated.
【EASY OPERATION】Toolwiz electrician crimper tool operates by pressing the screw and rotating the dies to the size you need, then just take a strong pull of the ratcheting wire terminal crimper to produce a good crimp on cable lugs.
【DURABLE】Toolwiz electrical tools crimper is made of SCM-40 hardened steel for a durable and specially thicken and reinforce the metal plate on crimp head for lifetime use..
【LIGHT WEIGHT & PORTABLE】 -Toolwiz wire crimping tool is 15.3 x 5.1 x 1.6in (39*13*4.2cm), 3.08lb (1400g), light weight and easy to carry, easy to get in tight locations.
Pacific Handy Cutter HH700 Banding and Strapping Cutter, Metal Head Concealed Blade for Cutting Packaging Straps
CUT AWAY PLASTIC BANDING AND STRAPPING — This plastic strap cutter quickly and easily cuts away pallet banding, strapping and more..
EASY BLADE CHANGE — Replace the blade with ease, ensuring that you always have a safe, sharp cutting tool on hand..
REDUCE WORKPLACE INJURY — Reduce the risk of workplace injury with a safely-designed, protective strapping cutter that prevents the need for exposed knife blades..
STURDY STEEL DESIGN — The heavy-duty steel design and easy-grip handle will not easily break or bend, allowing you a clean cut on the first try..
