Best Steel Braided Hydraulic Hoses

2-Stage Automatic Changeover LP Propane Gas Regulator with Two 18" RV Pigtail Propane Hoses with Gauge, Stainless Braided QCC1 1/4" Inverted Male Flare, Propane LP Gas Regulator for RV Camper Trailer

  • ...lor to let you know when a tank has been depleted and needs to be refilled also remind you switching to the backup tank. For RVs with dual propane tanks allow removal of empty cylinder for non-stop refill without interrupting propane supply..
  • ❤【2 Pack 18 inch Stainless Braided QCC1 1/4" Inverted Male Flare RV Pigtail Propane Hose with Gauge】1/4" inverted male flare stainless steel braided RV propane pigtail hose to 1/4" inverted male flare. (Not the 1/4" Male NPT. Please check your connector before you order it.) This propane tank hose come with tank gauge level indicator with 3 different colors Dial Gauge can glows in dark, allows you to read and monitor the gas level without necessarily removing the tank, and can detect the leak..
  • ❤【Specification & Material】RV Propane Regulator: Inlets are 1/4" SAE Inverted Flare, Outlet is 3/8" Female NPT, Primary Cylinder Capacity 210,000 BTU/hr, Reserve Cylinder 130,000 BTU/hr. RV Pigtail Propane Hose: 1/4" Inverted Male Flare and QCC1 Fitting. All Fitting Connectors of Propane Hose, both ends of 2-stage regulator made of 100% Solid Brass. RV propane hose made of durable stainl....
Check Stock

KES Black Bathroom Faucet 2 Pack Single Hole for Vanity Sink Faucet cUPC Certified Stainless Steel Matte Black, L3156ALF-BK-P2

  • ...nd limescale, you can easily remove and clean them..
  • Easy To Install: Mounting Hole Diameter: 1.2 to 1.4 inches (32 to 36mm). Max. Deck Thickness: 1.3 inches (35mm). Spout Reach: 4.1 inches (105mm). Water supply hoses, mounting hardware and instruction are included..
  • Insured Quality Supply Hoses: Our hoses have nylon braided exterior, which protects against chemical corrosion (commonly caused by detergent) and rusting (yes, stainless steel will become rusty). And the inner tubing is made from PEX, safe for drinking water. With standard 9/16-25 UNEF connectors (of course made from lead-free brass, drinking water safe again!), you can easily connect our hoses with your stop valves. Moreover, our supply hoses have million dollar global insurance coverage..
Check Stock

WATERWICH Fuel Injection line Hose 6AN 3/8'' 25FT PTFE EFI LS Fitting Kit Stainless Steel Braided

  • ...er cover, 304 stainless steel wire braided middle layer, and a PTFE synthetic inner line. Not recommended installation in corrosive environment, 6AN braided fuel line's service life will be influenced..
  • 2.Wide Application:The 6AN PTFE fuel line mostly used in EFI LS system and can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. PTFE fuel line most stronger to extreme circumstances than the nylon braided fuel line. long service life, wear resistance and high temperature resistance..
  • 3.Operating Temperature Can Even Use it at -76℉(Min) or 446℉(Max) (-60℃ to 230℃). Maximum Working Pressure(psi) : 3000psi. Bursting Pressure(psi) : 10000psi. PTFE tube fuel hose length: 25Ft, inner diameter: 0.3inch (8mm), outside diameter: 0.47inch (12mm) . Please make sure the dimension, pressure and temperature range before purchase!.
  • 4.Package Included: 25Ft 6AN braided fuel injection line hose , fuel PTFE tube and aluminum alloy fitting adapter: 6pcs 6AN PTFE straight hose end, 2pcs 6AN PTFE 45 Degree hose end, , 2pcs 6AN to 3/8" hose adapter fitting, 2pcs 6AN to 1/4"NPT hose adapter fitting , 1pc AN6 to 3/8"quick disconnect male, 1pc 6AN to 5/16" hose adapter fitting..
  • 5.Professional installation recommended: PTFE hose ....
Check Stock

70M Digital Pressure Gauge Kit with 2 70MPA/10000PSI, Hydraulic Pressure Gauges for Excavator, 2 Test Hoses, 9 Couplings Hydraulic Gas Water Pressure Test Kit with Backlight, 1 Year Warranty

  • 【Perfect Fit】 Suitable for excavator brand includes: Caterpillar, CAT, Case, komutsu, Komatsu, Daewoo, Hyundai, Kato, Hitachi, Kawasaki, Komastu, Kobelco, John Deere, Sumitomo, Bobcat, Sany, Sumitomol. Quick release connector fits for both USA and Japanese brand excavator. Precisely measures the pressure of hydraulic system in the excavator construction machines etc..
  • 【What You Get】 70M Digital Hydraulic Pressure Test Coupling Kit Comes with ① Qty-2 10000PSI Digital Pressure Gauges (with protective cover).
  • ② Qty-2 63in (1.6m) Test Hoses with M16*2 end and BSP 1/4" female end respectively.
  • ⑤ Qty-1 Waterproof Aluminum Storage Case..
  • 【Measurement】 Digital Gauge Max Work Pressure: 0 - 10000PSI / 700BAR / 70MPa - Ø80mm. 9 Type Test Couplings: G1/4, G1/8, G3/8, M10*1, M10*1.25, M14*1.5, UNF7/16-20, UNF9/16-18 and NTP1/4..
  • 【Better Accuracy】 Hydraulic Pressure Gauge consists of premium grade pressure sensor and electronic components. High precision and stability. Precisely measures gas, liquid, oil and non-corrosive mediums of stainless st....
Check Stock

Fuel Line Kit 3/8\ 6AN 20FT Fuel Hose Nylon Stainless Braided CPE Oil Fuel Injection Line Fitting Kit Universal

  • ... line with 6AN fittings: The package includes 10pcs 6an swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree) and 3/8 braided fuel line. All the an fittings feature a reusable spin-lock connector.
  • Universal Application: The AN6 nylon braided fuel hose can be worked with coolant, diesel, oil, hydraulic fluid, pump gas, air, and fuel. This braided fuel line mostly used in brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, transmission system and oil cooler kit, etc. Easily enough line here to run all the way from your fuel tank to the engine.
  • Excellent Flexibility and Durability: The Black Braided Steel Fuel Hose made of Nylon and Stainless Steel Braided + CPE Synthetic Rubber.
  • The hose end AN fittings is made of high strength T6061 Aluminum, polished and anodized surface provide the bright appearance, corrosion protection and strong strength.
  • Safety Features: The 6an push lock hose working temperature range: -40℉ to 350℉ (-40℃ to 176℃). Maximum Working Pressure (psi): 500 psi. Bursting Pressure(psi): 2000psi. Braided gas line Inner diameter: 0.34 inch, outside diameter: 0.56inch. Please measure before purchase.
  • No Worry To Buy: Excellently Sealed, no leaking. We offer 3-month after-s....
Check Stock

Anbull 20 Ton Air Hydraulic Bottle Jack, Blue Pneumatic Hydraulic Bottle Jack with Manual Hand Pump for Heavy Duty Auto Truck Repair

  • 【Wide Range of Uses】 Air hydraulic bottle jack is suitable for automobiles, trucks, farms, industries, mobile machinery, construction projects and heavy equipment. It can also cope with a variety of environments, such as temporary support for heavy objects, car repairs, car punctures, and giant lifting ..
  • 【Excellent Quality】 The shell of Anbull Air hydraulic bottle jack is made of high-quality steel, and the surface is treated with lacquer. Because of the lacquer protection, it will not rust. Moreover, a wide and strong base increases stability and strength. The height of the rod can be adjusted flexibly, with strong pressure resistance and corrosion resistance. The spring has a compact structure, quick retraction and long service life..
  • 【Safe & Reliable Lifting】 Anbull Air hydraulic bottle jack includes two additional detachable handles for manual lifting without an air compressor.
  • the heavy-duty steel structure allows the jack to be used multiple times without wear and can easily cope with heavy loads..
  • 【Convenient & Labor-saving Operation】 Equipped with hoses and connectors, it can be quickly connected to the air compressor for easy lifting operations. The manual lever hydraulic lifting can be used outdoors, the rocker is two-stage ca....
Check Stock

Mardatt 7 Pcs Automobile Hose Remover Pliers and Hook Set Include Brake Line Pinch Pliers, Separator Pliers, Fastener Remover Hook, Pipe Repairing Tool for Auto Radiator Vacuum Hoses Trim O Ring

  • ...hoses, transmission lines, heating lines, or any other rubber hose for installation joints in real time..
  • 【Multi Function】Work great for removing all kinds of difficult dismantling pipes, such as air pipes, power auxiliary pipes, cooling oil pipes, water pipes, etc. Also perfect for pulling o- rings & gaskets on hydraulic fittings, breaking a seal on a stuck hose, brake hoses/fuel hoses/gas lines/coolant hoses/radiator hoses, lawn mower gas lines and vacuum clamps & hydraulic piston seals, clear out a grease fitting, ect..
Check Stock

EZ-Fluid Plumbing 12\ x 3/8\ Male Compression To 3/8-Inch Female Comp. Stainless Steel Braided Faucet Connector Line Extension, Faucet Extension Supply Hose Connector Lines, Fits Delta Faucet (1-Pack)

  • Stainless Steel Braided Supply Hose Line Faucet Connector Hoses.
  • EZ-FLUID Braided Stainless Steel Supply Line has cUPC, NSF Certified Lead Free.
  • EZ-FLUID Flexible Water Supply Hose Lines Connectors for Commerical or Residential Kitchen Sink,Bathroom,Indoor/outdoor Sink Faucets. And faucet water supply line extension available as well..
  • Stainless Steel Braided SS304 will deliver perfect corrosion protection for the supply line of the Kitchen,Bath Toilet,outdoor sink..
  • Plumbing Contactor Pack of 10 pcs 3/8" Compression x 1/2" Fip x 20" Long ,The 3/8" Female Compression hose attachment End will fits to 3/8" Male Comp. inlet on Angle Stop Water shut off Valve,or Any 3/8" Male Compression threaded Fittings.
Check Stock

Whirlpool 8212546RP 4-Foot Black Rubber Washer Hos

  • Braided stainless steel washer hoses provide long-lasting strength and reliability.
  • Stainless steel water hose is corrosion-resistant.
  • Fits most brand and includes everything you need to connect a washer to a hot and cold water supply.
  • Forged brass swivel adapters fit most brands.
  • Meets IAPMO and NSF water quality requirements.
Check Stock

3Ft 6AN 3/8" Fuel Line Hose Braided Stainless Steel W/2pcs AN6 Hose Fitting Kit Blue & Red Universal for Racing Fuel, Gas, Coolant etc

  • Stainless steel braided CPE fuel hose can be used with transmission fluid, coolant, oil, pump gas, race gas ,vacuum, hydraulic fluid, lube, diesel and fuel. Commonly used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, carburetor fuel hose, turbo cooler line, oil feed line, ls swap fuel line..
  • Braided Steel Fuel Line Maximum Working Pressure (psi): 1000 psi. Bursting Pressure(psi): 6000psi. Working Temperature Range: -40℉ to 257℉(-40℃ to 125℃). Please make sure the pressure and temperature range is suitable for your application before purchase..
  • Include a universal 3Ft fuel hose and 2pcs swivel hose ends.
  • Inner Diameter: AN-6 (3/8") - Outer Diameter: AN-9 (9/16").
  • Double stainless steel braid cover for excellent flexibility and resistance to abrasion. This hose is perfect for extreme environments where there is extra heat or where chaffing might occur..
  • Professional installation is highly recommended. Warranty: CarBole offers 3-month warranty for the steel braided hose..
Check Stock