Partsam Rectangular Red LED RV Camper Trailer Stop Turn Brake Tail Lights White License Plate Light 49 LED with License Bracket Holder and White Base 12V Sealed w Reflex Surface Mount (Left + Right)
8-5/8" x 3-7/8" Rectangle Trailer Tail light Kit serves 3 functions: stop light, turn signal light, taillight. Perfect for surface mount on CAMPER TRAILER. At the bottom of the left hand driver's side, you can see a license plate light and license plate mounting brackets built in. Red lens. White plastic base..
left hand driver's side: 27 Diodes( 22 Red++5 White ).
this light uses LEDs, which make great replacements for incandescent lights. They last about 50 times longer. They are more efficient, provide better light with less power output, and of course there's not bulbs to replace, or not brittle filaments..
It is designed to mount on the surface of a trailer and Camper etc..
there's three wires to connect. White is your ground wire, black is your taillight, and then the red is the brake and turn signal. This light is SAE and DOT approved..
Dimension: overall length: 8 5/8", The height: 3 7/8" and the total depth is 1 3/5".
PREMIUM MATERIAL: Trailer Lights includes 2pcs Rectangular combination stop / brake / reverse / tail / turn signal halo tail lights, 2pcs amber clearance lights, 25ft 4 pin wire harness, license plate bracket and mounting mounting screw, bolt and hardware, 4pcs reflective stickers. The tail lights are made of high quality ABS housing + PC lens, shockproof and dustproof, ensures long lasting durability..
PRACTICAL FUNCTIONS: Both of the LED trailer lights used as stop, turn, brake, tail, rear reflector, side reflector and side marker light. Besides, the left light has a license plate illuminator function. "Halo-Glow" design gives a new look for your vehicle. Much brighter and lights faster with lower energy consumption, guarantees super visibility and durability..
WATERPROOF RATE: IP68. Effectively protects the light from the invasion and corrosion of sand, dust, dirt, rain, snow, etc. Upgraded lampshade surface without screws, the LED trailer lights are completely welded together, the LED trailer lights are completely welded together. Featured great sealed and waterproof performance..
Partsam 10x Amber 2" Round Sealed Led Clearance Marker Light 4LED Grommet Mount RV Accessories, Reflective 2 Inch Round Trailer Led Side Marker Lights Lamps Kit Flush Mount with Wire Pigtails
Partsam (10 x Amber) Trailer Truck LED Sealed 2" Round Clearance Side Marker Light w/Grommet/Pigtails, Amber Lens, Reflex Lens.
Kit includes grommets and pigtails for complete installation.
Sonically sealed, waterproof housing and lens unit is submersible.
Round trailer light serves as either a side marker light or a clearance light.
LEDs make great replacements for incandescent lights.
2-WIRE CONNECTION: Black is the negative and red is the positive. Dimensions: Outer Diameter: 2.5"in., Inner Diameter: 2"in., High Diameter: 0.75in.(W/ Grommet) , Drill a hole about 2-5/16" to install.
Universally fit any Vehicles with DC 12V Such as Semi Truck & Trailer, Service Truck, Bus, Service Van, Utility Truck, Parade Float, Horse Trailer, Utility Trailer, Pick Up Truck, UTE, UTV.
CURT 121693 Class 2 Trailer Hitch with Ball Mount, 1-1/4-Inch Receiver, Compatible with Select Honda CR-V
DEPENDABLE STRENGTH. With a strong, welded steel build, this class 2 hitch is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component).
HIGHLY VERSATILE. This class 2 trailer hitch kit has a standard 1-1/4-inch receiver and includes a ball mount with a 3/4-inch hole, allowing you to tow a small trailer or mount a cargo carrier or bike rack (trailer ball sold separately).
DUAL-COAT FINISH. For industry-leading rust, chip and UV resistance inside and out, this tow hitch is submersed in a liquid A-coat and co-cured with a durable black powder coat finish.
EASY INSTALLATION. This class 2 hitch kit fits select model years of the Honda CR-V.
TESTED FOR SAFETY. Each CURT class 2 trailer hitch design is thoroughly tested at our Detroit facility, using real vehicles in real-world conditions. Our hitches are tested to SAE J684 specs to give you confidence and safety on the road ahead.
Agrieyes Wireless Trailer Lights with Adjustable Bracket, Battery Magnetic Tow Lights with Strobe for Towing Trucks, Wrecker, RV, Camper, Boats
LOW PROFILE SUBMERSIBLE - Our trailer light has everything you need to get your lighting system up and running. Each kit includes two 12V LED tail and turn signal lights and stainless steel hardware for easy fastening. All of our lights are built with corrosion resistant materials..
LONG-TERM USE - Do you know that our trailer lights are completely sealed and submersible? Its acrylic len are engineered to block water out and ensure the circuits are protected. Super bright LED lights provide maximum visibility and safety. Fully operable in inclement weather, these heavy duty trailer lights are tough and durable for the long term..
FULLY COMPLIANT - Our lights are 100% compliant with DOT FMVSS108 standards. This ensures that your lights are federally compliant for visibility, durability and reliability, which in turn secures the safety of others. Additionally, DOT compliant lights reduce the risk of liability in the event of property damage or personal injury..
COST EFFECTIVE - Our premium LED lights are high quality and packed full with value for long lasting lighting. LED lights can last 30-40 times longer than standard incandescent bulbs, which saves you time AND money. Save yourself the headache of replacing bulbs more often than you need to and maneu....
Partsam 10Pack(5 Amber + 5 Red) 2" Led Round Side Marker Light Grommet Flush Mount 4LED, Sealed 2 Round led Marker Lights Truck Trailer with Reflex Lens, IP67 Waterproof
Partsam (5 x Amber & 5 x Red) Trailer Truck LED Sealed 2" Round Clearance Side Marker Light w/Grommet/Pigtails, Amber/Red, Reflex Lens.
Kit includes grommets and pigtails for complete installation.
Sonically sealed, waterproof housing and lens unit is submersible.
Round trailer light serves as either a side marker light or a clearance light.
LEDs make great replacements for incandescent lights.
2-WIRE CONNECTION: Black is the negative and red is the positive. Dimensions: Outer Diameter: 2.5"in., Inner Diameter: 2"in., High Diameter: 0.78in.(W/ Grommet) 【You need to drill a hole about 2.25" ~2.3" to put this grommet in to have it fit for installation.】.
Universally fit any Vehicles with DC 12V Such as Semi Truck & Trailer, Service Truck, Bus, Service Van, Utility Truck, Parade Float, Horse Trailer, Utility Trailer, Pick Up Truck, UTE, UTV.
EASY TO INSTALL. No cutting! No splicing! This trailer wiring harness kit plugs into existing factory wiring on your vehicle and equips it with a standard, rear 4-pin trailer wiring connector for plugging in and towing a trailer.
STANDARD CONNECTOR. This plug-in 4-flat trailer wiring can be used to connect trailer tail lights, brake signal lights and turn signals. 4-way trailer light wiring is popular on a variety of trailers, adding versatile towing options for your vehicle.
VEHICLE-SPECIFIC. This aftermarket, vehicle-trailer wiring harness is designed for select years of the GMC Acadia.
EASY GRIP. Plugging in your trailer wiring and trailer lights is easy with the ergonomic design of this vehicle socket. It features tabs on the top and bottom for a better grip when plugging into your trailer or unplugging.
DUST COVER. To promote long-lasting use and weather resistance, this 4-pole trailer lighting wire harness comes with a rubber dust cover. It easily fits onto the 4-way flat connector when not in use, protecting it against the outdoor elements.
CURT 120913 Class 2 Trailer Hitch with Ball Mount, 1-1/4-Inch Receiver, Compatible with Select Ford Fusion, Lincoln MKZ
DEPENDABLE STRENGTH. With a strong, welded steel build, this class 2 hitch is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component).
HIGHLY VERSATILE. This class 2 trailer hitch kit has a standard 1-1/4-inch receiver and includes a ball mount with a 3/4-inch hole, allowing you to tow a small trailer or mount a cargo carrier or bike rack (trailer ball sold separately).
DUAL-COAT FINISH. For industry-leading rust, chip and UV resistance inside and out, this tow hitch is submersed in a liquid A-coat and co-cured with a durable black powder coat finish.
EASY INSTALLATION. This class 2 hitch kit fits select model years of the Ford Fusion and Lincoln MKZ.
TESTED FOR SAFETY. Each CURT class 2 trailer hitch design is thoroughly tested at our Detroit facility, using real vehicles in real-world conditions. Our hitches are tested to SAE J684 specs to give you confidence and safety on the road ahead.
CZC AUTO 12V Two Sided Magnetic Towing Light Kit for Trailer RV Boat Truck -Magnetic Strength 55 Pounds
Main Purpose: Works as a complete trailer tail light guard box set for your new or existing trailer, has stop turn tail lighting modes. Can be directly welded on or bolted on to the rear, side, bottom or top frame of your trailer..
Solid Built : Made of heavy duty steel, painted with quality black powder-coated finish, and pre-cut holes for 6” oval light, 2” round side light & license plate mounting. Durable for all weather elements..
Awesome Brightness: Use high-quality SMD LED, lights output excellent high brightness red light for stop turn light, low brightness for tail side marker light, greatly improving visibility and ensuring you a safer night..
Color Coded Wires: White wire with O ring terminal for ground, black wire for tail side marker light, red wire for stop turn light..
Simple Installation: All in a set and lights are mounted on the box. Just hardwire each pigtail wire to the corresponding wire on trailer. And then weld on or bolt on the light box to the trailer frame.
Linkitom New Halo Rectangle Submersible LED Trailer Light, Super Bright Brake Stop Turn Tail License Lights for Camper Truck RV Boat Snowmobile Over 80\ Inch
Set of 2 pack(Unique halo glow and solid light pattern design, different from other trailer taillights on the market), designed for 12v system. left light has functions as Stop/ Turn/Tail Rear/ Side reflector Side Marker and License Illuminator, right light has functions as Stop/ Turn/Tail Rear/ Side reflector Side Marker.
IP68 Waterproof and Submersible: There is no screw on the lamp shade , the LED trailer lights are completely welded together, The circuit board of tail light is seal. A drain hole is designed to pull out all the water. This is to guarantee that water will not damage the diodes or circuit board. excellent tightness makes it be definitely waterproof and submersible.Please install the trailer taillights with the drain hole downwards..
Compliant with DOT standards: The lamp shade of utility trailer light kit with a new ABS material, 100% compliant with DOT standards.
Easy to instal, The distance of two studs bolts is standard 2”, Direct replacement for your original incandescent bulb unit.
Widely Used : Widely applicable to 80 Inch width tractor, such as truck, trailer, boat, bus, lorry, van, caravan, snowmobile, etc. Please make sure wires connect correctly and no electronic short before underwater..
