OTC 7793 Master Bolt Grip Set - Flange Type Puller with Grade 8 Hardware
Multi-purpose applications such as steering wheels, flywheels, harmonic balancers, pulleys and gears with tapped holes.
Includes special stepped bolts for 1990-2005 GM 3300-3800 V6 crankshaft pulleys.
4-way slotted puller yoke and 2 lengths of hardened "live-center" forcing screws - a set of 3 interchangeable forcing screw tips are included to optimize pressure and prevent "walking".
Blow molded case to prevent spilling and each bolt size is molded into the storage compartment.
Three each of the following bolt sizes: M8 x 1.25 x 90mm, M8 x 1.25 x 45mm, 1/4-28 UNF x 3 inches, M8 x 1.25 x 65mm, 5/16-24 UNF x 3 inches, 5/16-18 UNC x 3.5 inches, 3/8-24 UNF x 1.5 inches, 3/8-16 UNC x 2 inches, 3/8-16 UNC x 3 inches, 3/8-16 UNC x 4.5 inches, and M10 x 1.5 x 35mm..
Thur amo 2 Jaw Bearing Puller, Adjustable Two Claw Pilot Remover Hand Repair Tool Carbon Steel Pump Pulley Remover Straight Type for Motorcycle Car Auto (2.5in - 35x45mm)
【Adjustable Design】 The puller can be bilateral rotation, enable stretching size and working space. Two jaw with adjustable clamping depth, fit for different size gears and bearings.
【Carbon Steel Material & Foring Process】 The bearing gear puller is made by carbon steel, and the tip of the mandrel undergoes a special heat treatment process to make it more solid and durable.
【Reinforcement Equipment】 The bearing gear puller comes with hexagonal screw and thread, will not slip, used for tightening, high strength.
【Professional Repair Tools】 This removal tool is particular for slide gears, pulley, and flywheel, making removal simple and without any damage. Give you positive pulling power to remove bearings groove pulleys on alternator and power steering pumps.
【Wide Application】 Suitable for automotive flywheel, motorcycle wheel, bicycle wheel, car wheel, machine wheel, pump bearing, generator bearing, machine bearing and so on.
ATPPCCE 39054 Belt Tensioner Assembly With Pulley For Honda Civic 2006-2011 4-Cyl. 1.8 L OE# 89600 39077 31170RWK005 31170RWK025 31170-RNA-A01 31170-RNA-A02 31170- RWK-015
Belt tensioner Fits For:Honda Civic 2006-2011 4-Cyl. 1.8 L.
OEM part numbers:39054 89600 39077 31170-RWK-005 31170-RWK-025 31170RNAA01 31170RNAA02 31170RWK015.
The replacement automatic serpentine belt tensioner pulley assembly transports power to the alternator,power steering pump,air conditioning and keeps it running smoothly and effectively.It is designed for vehicles that needs an automatic belt tensioner.The torsional round spring design provides consistent tension for maximum durability.
Belts、tensioners and idler pulleys are designed to the same life cycle,when one of them is replaced,the othes had likely met their design cycle as well, so it is recommended to replace all of them when replacing one of the parts just wanna avoid to having the influences of other accessories'service life.
For more detailed assembly information, check out our instruction section. If there is any problem with our belt tensioner assembly, please feel free to contact us and we will solve it for you in time.
OEMTOOLS 27311 Power Steering and Brake Bleed Adapter Kit Works w/Hand Vacuum Bleeder Brake Line Bleeder Kit w/ 2 Rubber Power-Steering Adapters
POWER STEERING BLEEDER: Power steering adapter kit works on most vehicles.
Meant to be used with a hand vacuum brake bleeder.
ACCESSIBLE BRAKE BLEEDER KIT: Not just a power steering bleeder.
Select one of 3 different sized brake bleed adapters for your caliper, hook up the....
REMOVE AIR FROM LINES: Remove trapped air with this power steering and brake bleeder adapter kit.
Check that your vehicle’s power steering reservoir....
HAND VACUUM PUMP READY: Couple the power steering fluid tool and brake system bleeding tools with a hand vacuum pump to effectively bleed air without....
DURABLE TIGHT FITTING COMPONENTS: This power steering vacuum adapter kit comes with 2 EPDM tapered rubber adapters and 3 rubber brake bleeder....
TrackStar Turnigy 13.5T Sensored Brushless Motor 3040KV Roar Approved
Premium Material: The hydraulic steering helm comes with high-strength aluminum alloy material, which is lightweight, anti-aging, corrosion-resistant,....
Optimal Hose Fitting: The adjustable stainless steel O-ring fittings will simplify the installation process and allow for simple reorientation after....
Considerate Details: The hydraulic helm pump is equipped with the replaceable shaft seal, the built-in lock valve, relieve valve, and air pocket.....
Complete Accessories: The hydraulic steering pump has a complete accessories kit for durable structure. It includes ball bearing piston race,-5 ORB....
Wide Application: This outboard helm pump is suitable for boats rated to a maximum of 300 HP. It can be used in mechanical/manual steering for yachts,....
VEVOR Hydraulic Gear Puller 15 Ton Max Capacity Hydraulic Puller 2 or 3 Jaws Bearing Hub Separator 3.9 - 11.8 Hydraulic Puller Separator Tool for Pulling Hubs Flanges Gears Bearings
Durable Material: The hydraulic gear puller is made of heavy-duty forged steel, featuring superior strength and no oil leakage. It's very sturdy and possesses 15T (33069 lbs) maximum capacity and a long service time..
Adjustable Jaws: You can install two or three jaws and adjust the height as needed. Besides, the pump head of the hydraulic bearing puller can rotate 360 degrees, which is easy for you to operate and use the tool..
Bidirectional Operation: The 15-ton hydraulic gear puller can be operated horizontally or vertically without site restriction. It has 2" (50 mm) axis travel with 7" (180 mm) max reach and 12" (300 mm) max spread..
Humanized Design: Equipped with a security relief valve, the piston rod, the detachable ejector pin, and the movable handle, the hydraulic steering wheel puller has the advantage of compact structure and working agility..
Diverse Scenario: A hydraulic puller set is an ideal tool for pulling hubs, flanges, gears, pulleys, flywheels, bearings chucks from shafts. It is widely suitable for car maintenance factories, mechanical factories, and repair workshops, etc..
Big Block Chevy with Electric Water Pump This Alternator Drive Kit is crank-mounted and designed with spacers that can be replaced with pulleys to drive other accessories such as external oil and vacuum pumps. Note: Use Moroso 710-97170 Gilmer Drive Pulley if external oil pump is used..
TRIAX Full Synthetic Power Steering Fluid Compatible with Honda & Acura, Asian Vehicles, OEM Grade, Fill for Life (1 Quart)
FILL FOR LIFE - Specifically designed to be compatible with Honda and Acura vehicles to last well over 20,000. It will maximize the power steering system life and fluid for precise steering year-round..
TRUE ALL-SEASON FLUID - High VI Index allows minimal viscosity changes in both very hot and very cold climates.
allowing smooth, precise steering under all conditions down to - 50 F. YOU WILL NOT get the "squishy" feeling in hot weather and squeaking / lazy steering in cold weather..
UNIQUE CHEMISTRY - Facilitates steering pump life far beyond regular power steering fluids which prevents pump seizing and wear..
MAXIMUM SEAL LIFE - Built-in additives help rejuvenate seals and gaskets to prevent cracks and leaks..
ALL ASIAN VEHICLE COMPLIANCE - Compatible with all Asian vehicles, such as Nissan, Idemitsu, Toyota, Kia, and others..