Best Stepper Motor Cable

ANNOYTOOLS ARM 32-bit 3-Axis CNC Controller,GRBL 1.1F USB Port CNC Engraving Machine Control Board with Fan Cooling DRV8825 Standalone Driver,Support 500W Spindle/NEMA17/23 Stepper Motor/Laser Module

Model:3 Axis GRBL 1.1F USB Port GRBL Control Board.
Input voltage: 12-24VDC .CNC Router Machine Controller board.
Compatibility: support 12V/24V laser, TTL/PWM modulation signal, 3P interface and 2P+2P interface.
support 775 motor, 200W/300W/500W spindle.
support dual Y-axis use, three-axis and two-axis switching use.
support X/Y/Z limit switch, Z-axis probe, emergency stop switch.
Support stepper motor: 12V, within 2A maximum current, within 1.5A recommended. (Stepper motor 42, 57).⚠️Please check the wire sequence when connecting the stepper motor, the wire sequence may be different for different motors, wrong connection may burn the motor and the motherboard..
Support software：LaserGRBL/Lightburn/Candle(3 axis)/Universal Gcode Sender.
Tip: Before you connect the motherboard, please carefully check the need to connect the device wire sequence (laser, motor) to prevent a mismatch of wire sequence, burn the device. Customer service 24H online, to provide you with help..

The most powerful Nema 23 stepper motor available. Ideal for CNC Mill Lathe Router..

Universal Stepper Motor Repair Kit:Total 2pcs,used for Stepper Motor speedometer,tachometer,oil pressure gauge,transmission temperature gauge, battery....
X27 168 Stepper Motor Kit also fit for 25 168, XC5 168, X15 168,Silverados, Suburbans, Tahoes, Trailblazers, Yukons.
Why do you need them,they can fix the problems of dead gauges, jumpy readings, sticky needle movement, gauges that ratchet up or down, gauges pegged....
Installation:You can search the instructions Video on Internet first,if you no found it,you can ask us for help..
Notice:This item not fit all vehicals,please confirm your year/make/model before buying..

Dual-channel H-bridge driver working mode creates higher working efficiency,L298N as main chip, Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors..
The L298N driver module, using L298N chip can directly drive two 3-30V DC motor, and provides a 5V output interface, you can chip circuitry to 5V power supply, support 3.3VMCU control, you can easily control the DC motor speed and direction, you can also control the 2-phase stepper motor, smart car essential..
Terminal driver part of the supply area VMS: +5V ~ +35V.
Drive part of the peak current Io: 2A / Bridge.
Logical part of the terminal power supply range Vss :4.5-5 .5V.
Logical part of the operating current range: 0 ~ 36mA.
The control signal input voltage range: 4.5-5.5V low 0V high.
To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage.
High working power to 46v, large current can reach 3A MAX and continue current is 2A, power to 25w..
Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability, large capacity filter capacitance,afterflow protection diode, more stable and reliable..

This Stepper Motor HAT gives your Raspberry Pi the ability to drives two stepper motors at the same time, supports up to 1/32 microstepping..
Standard Raspberry Pi 40PIN GPIO extension header, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B and later versions, Jetson Nano.
6 available microstepping modes, configured with the DIP switches: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step.
Applications: 3D Printer, Sculpturing machine, Mechanical arm.

Feature:8Pack white Stepper motor,less than20mA,5V.
Fixed problems like(caused by Motor Stepper):Gauge's sticking, shuttering.
To repair speedometer, tachometer, fuel, temp or any other gauges..
Application: For Instrument Panel,Gauge Cluster,Temp Gauge,Tachometer,Speedometer.
Attention:Make sure you can handle this work, it may need some professional equipment of PC Boards..

...ts video shooting to move at a constant speed and time-lapse shooting with adjustable exposure time, shooting time, interval, number of shots, and delay. The maximum load capacity is 11lb/5kg when shooting horizontally.
when the slider is tilted at 45°, the maximum load capacity becomes 5.5lb/2.5kg.
【Ultra-Silent Stepper Motor Driver & Power Options】 Featuring a unique silent stepper motor driver, the camera slider combines ultra-precision positioning with ultra-silent operation. A rechargeable 2600mAh NP-F550 lithium-ion replacement battery and a USB battery charger are included to power the remote control and motor. Or Use a USB power bank (with 5V 2A output, Not included) as the power source to power them.
【Supports Multiple Shooting Modes】 Adjust the black knobs on both sides of the camera slider to capture horizontal, tracking, and 120° panoramic shots and achieve multi-angle shooting effects. Adjust one knob to upper left and the other to lower right for tracking shots, set one knob to lower left and the other to upper right for 120° panoramas, and resume both knobs to their middle positions for horizontal shots.
【Lightweight & Balanced Design】 Made of carbon fiber and aluminum alloy, the camera slider is lightweight and easy to car....