This compact, dual-voltage voltage, the versatile unit offers the user a simple array of controls to accurately set the welder to perform under a wide variety of situations including fine aluminum welding.
Allows the welder to easily switch from 220v to 110v with the adapter plug that is included while being able to produce 200 amps on both AC and DC TIG and 195 amps on Stick.
Whether welding aluminum or any other metal, the TIGWELD 200SX benefits from cutting edge inverter technology.
User-friendly AC/DC TIG welder for the convenience of the user.
With the simplicity of the TIGWELD 200SX, the user is able to set the amps, pre-flow, post-flow, and clearance to dial in for a perfect aluminum or steel weld.
TIG Welding Torch WP17FV Flexible 13 Feet Air Cooled with 10-25/35-50 Plug Valve 0.04 -1/8 Tungsten Electrodes TIG Welder Adapter for High Frequency/Lift TIG Welder
[Plug Size] WP17V flexible comes with quick fitting connector 10-25 and 35-50 plug(can be replaced as needed), air cooled with valve.
0.02" to 3/32" tungsten electrode available.
[Flexible TIG Torch] Torch head can be adjusted to any angle as you want.
V-style torch knob to control gas on/off for quick and convenient control of shielding gas.
[Applicable Models] Can work with Reboot RBM-1300/RMB-1600/RBM-2100D/RBM-1550D as those welders support a LIFT TIG mode.Also the RBT-200PD/ACDC high frequency tig welder..
[How to use Lift Tig?] Connect to negative on the mig or stick welder with the quick fitting connector(correct your plug),blue cable for gas connection and leave the 2pins socket along,plug the ground clamp to positive.
[Standard Length] 13 Feet ,M16*1.5 & Two-pin socket,please check your tig welder before orders.
Welding Basics: An Introduction to Practical & Ornamental Welding
130 AMP MIG STYLE WELDER: Mig welder is easier for beginners than tig or stick style welders. Includes welding gun, ground wire clip (1.6m), Included accessories, cleaning brush, protective mask, 110v adapter.
GAS OR FLUX CORE: Digital MIG Welding Machine uses 0.6-0.8mm flux-cored wire. Can also be used with gas setup.
FULL BRIDGE CIRCUIT: Full bridge circuit provides professional level stability. Make sure to avoid models with only half bridge circuits. 60% rated duty cycle allows you to weld for six minutes then rest for four minutes.
DUAL VOLTAGE 110V/220V: MIG welder includes 220v plug and 110v adapter, machine features up to output that allows you to weld steel up to 0.08” plate steel. Supports, wire feeder 24V w/ 0.7KVA/1.8KVA maximum and minimum power.
ADJUSTABLE SPEED WIRE FEED: Adjust up to 6.7m per minute, dial in the perfect weld. Test data supports stable performance & output voltage. Automatically adjust the inverter pulse width through closed-loop control to ensure output stability.
Farm Stickers for Kids 400 Barnyard Animal Assortment 8 Sheets
Package Includes: 8 assorted farm sticker sheets, 400 stickers in 200 unique designs. Each sheet measures 7.5” X8.3”..
Great Gifts for Kids: Every kid likes farm themed party. Use them as party favors and your kids will love. Perfect for farm themed party, birthday activities, school reward, giveaways and other events. They will be your children’s favorite small gifts..
Various Cute Patterns: These stickers feature different farm themes, which includes cows, pigs, ducks, rabbits, chicks, vegetables, fruits and more..
Best Choice for Teachers: Cool, cute and fun farm stickers are perfect for labeling everything in your classroom! These colorful stickers are perfect for chalkboard, bulletin board, chore charts, learning center and desks. Your students will love the attractive classroom!.
Easy to Use: These farm stickers are cutting fine, easy to peel and the color printed brightly. Just peel and stick anywhere you like. Very easy to use and can be removed easily from most surfaces..
Powerful Cutting Effect: Up to 50A output, 60% Duty Cycle, maximum 1/2" clean cut..
Synergic Control: The welding parameter is built-in with precise data. It will choose the voltage, amperage and feeding speed that is needed based on welder data, making it much easier for new welders..
Foot Remote(Not Included)/Proximity Control: Compatible with 5pin foot pedal to adjust the current..
Safety Protection: Certificated by ETL, built in over current protection, over load protection, temperature control..
Gasless MIG/Stick/Lift TIG,110V/220V Dual Voltage 120Amp MIG Welder that is not Limited by Power Supply and is Convenient to Carry..
ANDELI Flux Core Welder is a breakthrough machine, Real 120AMP output current, strong input makes you fall in love with welding. utilising the efficiency and reliability of Multiple IGBT Inverters allowing a huge increase in duty cycle! meaning you can push this powerhouse to the limit and beyond!.
This gasless welder has wire feed speed control so that you can weld smoothly and excellently by adjusting it to suit your application! You can operate it easily even though you are a welding beginner..
The design of the dual voltage MIG welder is compact, small, and portable.(need buy extra TIG Lift Torch and MMA Holder, not included inside product)..
CE certification, Efficient customer service team, if you encounter problems when receiving the goods, you can contact us for free guidance. We will provide returns and exchanges within 30 days after receiving the goods, and provide a two-year warranty and free replacement parts..
Mini Welding Machine 110V Plug, 250A Stick MMA Welder Machine IGBT Digital Smart VRD Hot Start with Wire、Tongs, Ground Wire, Clip, Mask and Gloves.fits Below 3.2mm Welding rods
The Miuezuth MINI arc welding kit has multiple protection mechanisms to improve the safety factor, the insulation protection level is "F", and the enclosure protection level is "IP21", which can ensure your safe use. With overheating and overcurrent automatic protection. This small welder is very easy to use, even a novice can use it..
The Miuezuth welding machine adopts the most advanced IGBT technology, the efficiency reaches 85%, and the power factor is 0.93. The miniature welding equipment reduces the loss of copper and iron, which is very energy-saving, the energy optimization effect is remarkable, and the welding efficiency is significantly improved..
The Miuezuth ARC Portable Welder features an easy-to-carry carrying strap, compact and lightweight body, and a colorful hard carton packaging for easy storage and portability. Whether you work indoors or out, this welding machine is your go-to welding tool..
Every Miuezuth IGBT rod stick welder machine is inspected before leaving the factory to ensure that it meets the high standards we set. Every semiconductor, accessory, cable, electronic board, and spare part has been thoroughly inspected..
TIG Welding Torch WP-17V 13ft 150Amp Air Cooled Lift TIG Torch for YESWELDER MIG-205DS MIG-250PRO MIG Welder ARC-205DS Stick WELDER
[UPDATED] A brand new Lift Tig gun with anti-aging rubber, outer woven material..
[APPLICATIONS] For YESWELDER MIG-250PRO MIG Welder, MIG-205DS MIG Welder and ARC-205DS Stick Welder..
2. Accesories: 10N50 Alumina Ceramic Cup #4 (1/4" orifice)//10N49 Alumina Ceramic Cup #5 (5/16" orifice)//10N48 Alumina Ceramic Cup #6 (3/8" orifice)//10N25 Collet 1/8"(3.2mm)//10N23 Collet 1/16"(1.6mm)//10N24 Collet 3/32"(2.4mm)//10N28 Collet Body 1/8"(3.2mm)//57Y02 Long Back Cap//57Y04 Short Back Cap..
HONE Stick Welder 110V/220V Actual 140Amp ARC Welder Machine IGBT Inverter Digital Display LCD Welding Machines with Hot Start Arc Force Anti-Stick High Efficiency for 1/16 -1/8 Welding Rod.
➠【Digital IGBT Inverter Technology】This ARC welder come with advaced unique IGBT control mode improves the reliability of welding machine. Powerful Arc-force provide smoother welding and deeper penetration, keep arc stability, consitant welding current, the pretty nice beads, specially when in small welding current..
➠【Suitable for Series Welding Rod】The welder has amazing hot-start, is ideal for the rods AWS E6013 E7018 E6011 of 1/16"-1/8"(1.6mm-3.2mm), you just take the rod touching the workpiece, arc striking immediately, also can handle E6010 cellulose electrode, capable of welding mild steel, carbon steel, stainless steel and cast iron..
➠【Safe and Stable】This welding machine has Anti-stick function easy the electrode removal from the workpiece, and closed-loop feedback control and multiple protection functions set internally, to prevent over heat, over current, over-voltage, under-voltage and short circuit damage to make sure safely operation..
➠【Easy to Operate】The soldadora inverter 110V 220V equiped with digital display and trouble indicate, the real welding current be shown, is so easy to use that it can be used by novice or master welder. No matter is man or woman welders..
HITBOX 50A Plasma Cutter Welder Combo - 4 in 1 110V/220V 200A HF Pulse TIG Welder - Stick ARC MMA Welder High Frequency Multifunction Cutting Welding Machine with Foot Pedal (CT520)
【4-in-1 Plasma cutter/welder combo】110v/220v 10-50Amp High Frequency plasma cutter max ideal cut thickness: 1/2".
200amp TIG Pulse Welding Equipment allows welding thinner metals and high heat conductive metals without burning through. 200amp stick/mma/arc electrode welder Efficiency: 80%. Real current extending the weld cable to 168 ft does not attenuate the current.
【Foot pedal remote control】Synergic Control,Automatic change of the voltage by adjusting the amperage.Comes with foot remote control / proximity control with MMA, TIG welder can improve welding efficiency, reduce the hassle in pedal control current, and guarantee quality (suitable for cutting and welder). The current fast heating (hot boot), slowly down, is good for the formation of the welding pattern.
【Versatile welding, cutting machine】Cuts many metals including stainless steel, aluminum, titanium, cobalt, nickel alloys and cast iron. Includes soft-switching technology and full-bridge design for a longer life and stable arcs at low temperatures.
