Huepar Cross Line Laser - DIY Self-Leveling Green Beam Horizontal and Vertical Line Laser Level with 100 Ft Visibility, Bright Laser Lines with 360° Magnetic Pivoting Base -M-9011G
1/4 -20 thread mounts allows you to use it with a tripod (not included) and adjust its height easily to make measuring flexible and stable..
⭐EASY OPERATION - Simple to use, one switch operation.
Simply slide the Pendulum to unlocked position the tool will instantly project a perfectly straight laser cross onto the wall. This sliding switch makes the M-9011G a suitable tool for anyone to use, even those without much previous DIY experience..
⭐MANUAL FUNCTION - As well as being self-leveling, the 9011G also has a manual function which means that the cross line locks into position when tilted at an angle to maintain the perfect 90 degree angles. (Ideal for building Festival decorations).
ATOLS 16 Lines Laser Level, 4d Laser Level 360 Self Leveling, Green Laser Level Horizontal Vertical with 2 Rechargeable Battery & Remote Controller for Picture Hanging and Construction
4 X 360 WITH TOP & FLOOR LINE LASER: This laser tool provides four 360 planes of laser light. The top 360 horizontal line can be used for ceiling installation. The 360 floor horizontal line is for tiling installation. With the lifting base, the 360 floor laser can raise from the surface to go over and travel past uneven surfaces or obstructions between 1" and 3.54" height. Two 360 vertical lines cross at 90angles makes user quickly visualize and finish square layout..
LCD DISPLAY&BLUETOOTH TECH: The laser level has LCD screen to easily get the status of the battery, angle, pendulum and pulse mode on the display. Bluetooth connectivity enables to control the setup of the laser from across the room with Huepar App on smart phone and remote control. The App and remote control can switch ON/OFF the laser lines and pulse mode, select the laser planes. Huepar App also provides out-of-level alarm. The laser tool can connect two Bluetooth devices simultaneously..
TRIPLE POWER METHODS&TYPE-C CHARGING PORT: This 360 laser tool adopted 7.4V / 2600mAh Li-ion battery (can be purchased easily at local market) for extended run-time, or with 4 AA alkaline batteries. Besides, this 4D laser level can be used at job site by plugged in when take out the battery. With Type....
Huepar Multi-Line Laser Level-360° Floor Horizontal and Two Vertical Lines with Plumb Dot, Green Cross Line Self-leveling Laser Tool-Rotating Base, Lifting Base, Li-ion Battery&Hard Carry Case LS21G
⭐MULTI-LINE LASER: Huepar LS21G line laser projects 360° floor horizontal line, 2 vertical lines and the plumb dot cover the floor, wall, ceiling around the room. Providing all-around leveling coverage for layout of tile, stone, brick, carpet and hardwood flooring. 2 vertical lines cross at 90° angles in the ceiling, makes user quickly visualize and finish the square layouts on the ceiling. An unique down plumb dot provides additional benefits of plumbing and squaring applications..
⭐EXTRA BATTERY & TYPE-C CHARGING PORT: This laser level comes with large capacity 5200mAh Li-ion battery. There is a Type-C charging port on the Li-ion battery pack that can be charged separately. 4 battery indicators on the Li-ion battery allow users to know the current battery level and charging status. With Type-C charging port, the batteries can also be charged by phone, laptop, power bank, car charger, etc..
⭐MICRO-ADJUST BASE & LIFTING BASE: The laser level comes with 1/4"-20 & 5/8"-11 threads to suit for standard tripod or laser mounting pole. Equipped with a metal micro-adjust fine turning pivoting base, the laser dot can be projected through the 5/8" thread, and the micro rotary knob enables users to make 360°adjustment. With the lifting base, the 360° fl....
Huepar Laser Level Multi-line - Four Vertical and One Horizontal Cross Lines Laser With Plumb Dot, Green Beam Alignment Self-leveling Laser Tool, 360°Rotating Base & Hard Carrying Case Included NT411G
EFFICIENT MULTI-LINE LASER TOOL: Huepar NT411G multi-line laser level projects one horizontal line, four vertical lines plus plumb down point -for leveling, aligning plumb and square applications. Users can short press H and V to switch the laser lines, Vertical lines cross at 90° angles in the ceiling, forming the up point to divide surfaces at a right angle. 4 vertical lines covering the ceiling, walls, and floor, effectively separate the room..
LI-ION BATTERY & TYPE C CHARGING PORT：Huepar Level laser tool adopted 3.7V / 2500mAh Li-ion battery for extended run-time about 4hours. 4 battery indicators on the Li-ion battery allow users to know the current battery level and charging status. There is a Type-C charging port on the Li-ion battery pack that can be charged separately. And the laser tool can also be charged by laptop, power bank, car charger, etc..
ROTATING BASE & 5/8" THREAD APPLICATION: The laser level with a metal micro-adjust fine turning pivoting base offers 360° rotation, the micro rotary knob enables users to make 360°adjustment and height adjustment, combined with the built-in bubble which enables adjustment of the position of the laser tool on uneven or sloping ground. The laser level comes with 5/8"-11 thread, laser dot can be p....
HILDA 4x360°Laser Level Self Leveling with Alarm,16 Lines Green Line Laser,2x360° Vertical and 2x360° Horizontal laser tool, Rechargeable Li-ion battery,Level tool for Indoor and Outdoor Construction
【360 °Measurement】4 X 360°Green Laser Lines & 16 Laser Lines.HILDA Laser Level have 2 horizontal 360°plane, two vertical 360°planes. 16 laser lines, which can cover the floor, walls and ceiling all around the room. Horizontal lines and vertical lines cross at 90°angles help you to visualize quickly and finish square layout..
【High Visibility】Green laser level with 2 times brighter than red lasers, under the same lighting conditions, the green line is easier to be found than the red line.In addition,HILDA green laser level has 10 grades about the thickness of line,you could choose it all by yourself.Finally,the green lines provide a working distance of up to 100 feet and meets indoor and outdoor projects totally..
【Self Leveling & Manual Mode】①Switch the Power ON / OFF button，it's on the self leveling mode.This laser level can be tilted self-leveling within± 4°,the alarm will be activated If this range is exceeded.And the alarm wouldn't be turned off until we put it in a level place.②Press the power button “OUT”on the top for 3s to turn on the manual mode,then you could use it in any angle without alarm.Tip: the manual is in the packaging gap..
【Power Methods & Type-C Port】The HILDA laser level has two charging ways.①Wh....
Huepar 901CG Self-Leveling Laser Level, 360 Green Beam Cross Line Laser Tool, Alignment 360-Degree Horizontal Line with Pluse Mode, Magnetic Pivoting Base Included
⭐360-DEGREE HORIZONTAL LINE - With one ultra-bright 360° horizontal and one 130° vertical green beams provides all-around leveling coverage even in big job-site. The bright 360° horizontal line allows the user to project a laser reference line around the room with accuracy to quickly establish level, enabling users to work in different parts of a room simultaneously..
⭐GREEN LASER UNIT- This self-leveling cross line laser level adopt the latest LD blue-green laser unit, it is at least twice brighter than red lasers utilizing the same power source. With accuracy of +/- 1/9 inch at 33 feet for lines, and a maximum working range of 130 feet..
⭐MULTIFUNCTIONAL MODE - One button operation makes it easy to project lines together or independently (cross line, vertical and 360-degree horizontal). With our smart pendulum system, this laser level tool self levels and indicates out-of-level condition while pendulum unlocked. Once pendulum locked, it switches to manual mode to lock lines for use at any angle..
⭐OUTDOOR PULSE MODE & DURABLE- When the pulse mode is turned on, laser tool can be used with a laser detector for working in even brighter environments or at greater working distances. This laser level is covered by TPR soft rubber for shock resist....
Mini Circular Saw, HYCHIKA Compact Circular Saw Tile Saw with 3 Saw Blades 4A Pure Copper Motor, 3-3/8”4500RPM Ideal for Wood, Soft Metal, Tile and Plastic Cuts, Laser Guide, Scale Ruler
...rit diamond blade for tile cuts, small size and weight also make it a good addition to your toolkit, great for DIY projects around the house and your workshop. (1"for Wood.
【PRECISE AND ADJUSTABLE CUTTING DEPTH】: With the laser guide, the mini circular saw keeps the cutting on a straight line. Also the parallel guide attachment allows you to make a precise and quick cut with ease. Easy-set depth gauge lever for adjustable cutting depth from 0-25mm(1’’). Laser Level: Class 2..
【ERGNOMIC AND SAFE】: The soft rubber handle reduces hand fatigue effectively. Also with a dust port and the saw dust pipe, you can connect it to your vacuum to maintain a clean working environment. The double protection switch enhances safety in use..
【PACKAGE CONTENTS】 1 * Compact Circular Saw.
1* Dust Exhaust Pipe；2 * Cells for Laser Guide.
1 * User Manual.If you are not satisfied or have any question ,please feel free to contact us. 24H on line..
30 Colors Multicolor Mixed Colors Rolls Striping Tape Line Nail Art Decoration Sticker DIY Nail Tip (Basic)
...eform. Widely application not only ideal for handling small parts like nail strips line, nail jewelry, rhinestone, tiny nail sticker, etc. Also suitable for picking up lashes, small makeup decoration, etc..
Widely Use: Suitable for daily home use nail art DIY and professional nail art salon. You can create multiples straight line pattern of your own style with UV Gel, Acrylic nail art, nail polish etc. Not only for nail art, but also for handcraft, phone case design, school project, etc..
CIGMAN Laser Level Self Leveling 3x360° 3D Green Cross Line for Construction and Picture Hanging, Rechargeable battery, Remote Controller, Magnetic Rotating Stand Included
High Visibility-- The green laser level line is 4x brightness than the red beam, which can provide a working distance of up to 100ft, available outdoors. Safety level-Class II,.
3x360° Full Layout-- 1x360° HORIZONTAL LINE & 2x360° VERTICAL LINES cover all around the room. Each button on this laser level corresponds to a single laser line, you can easily choose to turn on/off any laser line.
Remote Control & Rechargeable-- With the remote control, your alignment job becomes simple and fast. Type-C charging saves you the trouble of changing batteries.
Self-Leveling & Manual Mode-- Unlock the pendulum, the laser level will self-level within 4°(otherwise the laser will keep flashing). Lock the pendulum to switch to the manual mode, meet your alignment needs from different angles.
What You Get-- 1x CM-701 Laser Level Tool, 1x Portable Bag, 1x Magnetic "L" Base, 1x Mini Tripod Base, 1x Remote Control, 1x Laser Target Plate, 1x Type-C cable, 1x User Manual. Combined with Amazon's excellent delivery service, we provide a 36-Month after-sale service, lifetime ....
PREXISO 360° Laser Level with Tripod, 100Ft Self Leveling Cross Line Laser Level with Green Glasses, Portable Bag, 4 AA Batteries - Green Horizontal Line for Construction, Tile, Home Renovation
360° Green Laser Source & 3 Projecting Modes - 360° Horizontal beam easily projects a line cover the wall, ceiling. Projects bright horizontal, vertical & cross lines onto flat surfaces, 3 modes laser line can be switched independently.
Green laser is 3 times brighter than red laser with the same light source, and gives you maximum green laser brightness up to 100 ft with high accuracy.
Multipurpose & Widely Application - PREXISO line laser can cover the room surrounding floors, walls and ceilings. The horizontal and vertical lines intersect at an angle of 90° to help you quickly visualize and complete the square layout.
Applicable for floor and wall tiling, chandelier, spotlight install, hanging wall draws, air condition install, door & window calibration, building structure measurement.
Class II laser product, maximum laser output < 1mW.
Self Leveling & Manual Mode - With the switch to the "UNLOCK" side, the tool is in self-leveling mode, means the tool will level itself if it is within ±4° of horizontal. If the surface tilt more than 4 degrees, If the surface tilt more than 4 degrees, the laser will blink as an alarm.
Slide the switch to "LOCK" side and press the button 3sec to turn on the laser in manual mode, the self-leveling feature is d....
