Best Strap End Punches

Real Avid Hammer & Punches + Smart Bench Block

  • ESSENTIAL GUNSMITHING TOOLS designed with Real Avid’s ingenuity: Accu-Punch Hammer and STANDARD PUNCHES Set paired up with innovative Smart Bench....
  • GUNSMITHING HAMMER: adjust to the situation with interchangeable hammer heads: easily switch between steel, brass, rubber, and nylon.
  • STANDARD, FLAT TIP PIN PUNCHES FOR ANY GUN: hardened steel, nickel plated flat tip punches for driving out solid pins.
  • Includes 9/32, 1/4, 7/32, 3/16, 5/32, 9/64, 1/8, 3/32, 5/64, 1/16" nickel-plated, hardened steel pin punches.
  • AUXILIARY TOOLS: Proprietary Pin Alignment Tool and non-marring finishing punch to make common maintenance, modification and repair tasks hassle-free.
Check Stock

Real Avid Accu-Punch Hammer & Punches Set with Smart Bench Block, Combo (Hammer & Brass Punches + Bench Block) red

  • ESSENTIAL WORKBENCH TOOLS designed with Real Avid’s ingenuity: Accu-Punch Hammer and Punches Set paired up with innovative Smart Bench Block.
  • BRASS AND STEEL FLAT TIP GUNSMITHING PUNCHES: standard sized, brass and steel pin punches AND PIN ALIGNMENT TOOL.
  • 1/16", 5/64", 3/32" FLAT TIP steel punches and 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 9/32" FLAT TIP brass punches 5/16" engineering resin punch.
  • AUXILIARY TOOLS: Proprietary Pin Alignment Tool and non-marring finishing punch to make common maintenance, modification and repair tasks hassle-free.
  • SMART BENCH BLOCK: non-slip, steady work surface, helps protect finish and firearm itself from causing accidental damage. MAGNETIC: captures the small pins – prevents losing pins.
Check Stock

Ecohu Butterfly Punch Cutter 1-inch, Paper Punches, Craft Lever Punch Handmade, Hole Shape for Paper Crafting, Scrapbook, Cards Decoration, DIY Arts.

  • SAVE TIME: Spring-action lever makes the punch easier and more comfortable to use and gentle your hands, just put a paper inside it, and take a little bit effort to the handle, comfortable to use, it created consistent and identical butterfly very easily..
  • EASY TO USE: Can hold it in your hand and squeeze it or set it on the table and push down like a stapler. Paper it punches clean and even has a compartment underneath to keep your punches from falling on the floor, easily getting a beautiful butterfly shape from card stock or paper..
  • USED FOR DIFFERENT CREATIONS: You can make different artwork according to your imagination. Perfect for kids' DIY artwork, gift wrapping, envelopes, memory books, greeting cards, scrapbooks and any paper craft..
  • HIGH QUALITY: Made of quality plastic shell and stainless steel cutting blade, very sharp end can be lubricated by cutting through wax paper make it cuts smoothly & quickly. Craft punch out size: 1inch..
  • PAPER REQUIRED: It’s used on regular paper, scrapbook, cardboard or card stock not very thick. For best results use 120-220g craft paper, with thick cardboard it is necessary to apply some force, don’t put too many papers in or it will get stuck..
Check Stock

Real Avid Punch Set, Gunsmithing Tool Kit with Roll Pin Punch Set, Flat Tip Metal Punch Set, Brass Punch Set and Gunsmithing Tools: Pin Starter Tool, Finishing Non Marring Punch and Staking Punch Tool

  • GUNSMITHING TOOL KIT: all-inclusive, 37-piece gunsmith punch set, essential armorers tool kit for firearms disassembly, gun repair and for custom DIY builds.
  • COMPLETE PUNCH SET: array of standard, flat tip metal punch selection.
  • premium quality soft brass punches and a set of auxiliary gun smithing tools to remove and install common pins.
  • FLAT TIP PUNCHES: standard steel punches to remove and install solid pins for gun repair. INCLUDED: 1/16, 5/64, 3/32, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 9/32.
  • ROLL PIN PUNCHES: feature round, half-ball tips for driving hollow pins, tension pins and spring pins, without the risk of causing damage. INCLUDED: 1/16, 5/64, 3/32, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 9/32.
  • PREMIUM BRASS PUNCHES: softer than traditional steel punches.
  • allow to deliver more controlled taps, minimizing the risk of damage to valuable firearms. INCLUDED: 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 9/32.
Check Stock

Planner Punch Board by We R Memory Keepers | Includes punch board and five planner punch inserts

  • PUNCH HOLES THAT FIT ANY PLANNER: Works with all popular planners on the market-standard hole, disc and spiral..
  • CUSTOMIZE TO YOUR NEEDS: Punches are interchangeable and adjust for easy customization..
  • VERSATILE: Punch holes on paper or cardstock up to 12 inches..
  • ALL-IN-ONE PUNCH BOARD: Includes punch board and five planner punch inserts. Also comes with easy reference chart and instructions..
  • EASY STORAGE: Punches lock together for convenient storage when not in use.DescriptionThe Planner Punch Board by We R Memory Keepers is an all-in-one punch board that works with all popular planners on the market: standard hole, disc and spiral. Convenient interchangeable punches adjust easily for customization. This versatile punch board punches holes through paper or cardstock up to 12 inches. Includes punch board and five planner punch inserts. Also comes with easy reference chart and instructions. When youre finished with your project, punches lock together for convenient storage..
Check Stock

30 x 16g Threaded CO2 Cartridges Refills for Bike Bicycle Pump CO2 Inflator Heads - Great Refill for Mountain Or Road Bikes Tires

  • TIME SAVING & EFFORTLESS: CO2 inflators are the devices designed to inject CO2 gas (via CO2 cartridges) into your bicycle tires. Those 16g threaded CO2 cartridges are high pressure. It only takes a few seconds to release the whole bottle of gas. Also great for inflating a tubeless tire..
  • PORTABLE: CO2 cartridges are so light and compact, easy to carry around in your saddle bag, backpack, attached on bottle cage holes & under saddles (with special adaptors)..
  • PRECISELY THREADED: Well threaded cartridges would match the high quality inflator heads perfectly. It ensures that the cartridge could be screwed right to the end of the CO2 inflator head where the pin punches a hole..
  • STRICT QC: Every Cartridge is weighted before packing in the factory!.
  • WARNING: Never store the cartridges in or near any hot place, such as in the car under direct sunlight, near heater and oven. Never use low quality CO2 head. Make sure the head punches the bottle fully, check if the gas being released within seconds. If not, or the gas being released very slowly or the gas freezing the head, please keep discharging the gas for a few mins until the bottle is fully empty..
Check Stock

AQUOS Heavy-Duty 2021 New Thermobonding 0.9mm Thickness PVC 12.5ft Inflatable Pontoon Boat with Guard Bar and Folding Seat for Bass Fishing, Lure Fishing, Aluminum Floor Board

  • NEED A PONTOON LADDER LIFT STRAP THAT ACTUALLY WORKS? Look No Further! Our Heavy Duty Pontoon Boat Ladder Strap Solves Your Problem! Custom Made In U.S.A..
  • PONTOON LADDER LIFT ASSIST STRAP Has A Secure Loop Handle On One End Making It Easy To Slide Your Hand Through To Grab, And A Loop At The Other End For The Bottom Rung Of Your Ladder. Extra Easy To Pull Up Your Ladder And Snap Hook Keeps The Top End Secure..
  • LADDER PULL-UP STRAP Has A Stainless Steel Snap Hook. Also Included Is A Stainless Steel Eye Strap With Two Stainless Steel Screws For Easy Attachment To Your Chosen Location..
  • WEATHER & UV RESISTANT Polyester Webbing Swim Ladder Strap Easily Outperforms Polypropylene And Competitors. Made To Last With Lifetime Thread. Boat Ladder Strap Is 42" Long From End Of Hook To End Of Handle..
  • QUALITY IS IMPORTANT to us and we like to pass that on to our customers through our products. Make your ladder secure with our premium swim ladder strap. Your purchase will include 1 pontoon ladder lift strap with snap hook and 1 eye strap with 2 screws. Sold as Pkg of 1..
Check Stock

Real Avid Accu-Punch Hammer & Long Punches Set with Oversized Master Bench Block

  • ESSENTIAL WORKBENCH TOOLS designed with Real Avid’s ingenuity: Accu-Punch Hammer and LONG PUNCHES Set paired up with advanced, specialized Master Bench Block.
  • AUXILIARY TOOLS: Proprietary Pin Alignment Tool and non-marring finishing punch to make common maintenance, modification and repair tasks hassle-free.
  • ACCU-PUNCH HAMMER: adjust to the situation with interchangeable hammer heads: easily switch between steel, brass, rubber, and nylon.
  • grip confidently thanks to ergonomic, rubberized handle – all to allow for maximum control and precision while tapping pins.
  • SET OF SPECIALIZED, LONG PUNCHES: Special Application, Long Punches – selection of nickel-plated steel, standard flat punches and roll pin punches, featuring extended bolt catch pin and magnetized roll pin starter. Designed to fit flush against flat surface, such as receiver..
  • MASTER BENCH BLOCK: large, non-slip, steady work surface, helps protect finish and firearm itself from causing accidental damage. MAGNETIC: captures the small pins – prevents losing pins. Includes magnetic storage solution for common size pins.
  • ADVANCED AND SPECIALIZED: purposefully contoured for standard parts and components. Allows you to work efficiently and confidently. Maximum comfort and maxmum stability f....
Check Stock

Wheeler Hammer and Punch Set with Punches, Brass/Polymer Hammer, Storage Case for Gunsmithing, Firearm Maintenance

  • NON-DESTRUCTIVE: Chrome plated steel hammer has nylon and brass heads to ensure strong, but non-marring contact while in use.
  • BE PREPARED: Features brass, steel and nylon solid punches making it the ideal kit for your workbench.
  • INCLUDES: 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 9/32" and 5/16" brass punches, (2) 1/16", (2) 3/32" steel punches, 15/64", 3/8" plastic punches.
  • STORAGE: Comes with a convenient plastic molded storage case.
Check Stock

GEARWRENCH Dead Blow Ball Pein Hammer, 31 oz. - 68-540G

  • Polished Steel Hammer Face and Peen - Provide for a smooth striking surface ideal for striking hammering and straigtening metals and striking punches and chisels.
  • Industrial Construction - Welded steel shanked handle is fixed to canister head and throughout the handle providing unmatched strength. The flared end and textured polymer overmold grip ensures the hammer stays in your hand..
  • Shot Filled Bead Blow - Enhances rebound reduction and providing unequaled striking force. The feature reduces fatigue allowing you to use this hammer all day..
  • Great for beading, cars, crafts, hobby, home, jewelry, and more.
Check Stock