Best Stroke Oil Injection System

49CC Motorized Bicycle Kit Bike Engine Kit Single Cylinder 4-Stroke Gas Petrol Motorized Bike Engine Scooter Belt Gear Fits Most 26' or 28' Bikes with V-Frame

  • ★【PROFESSIONAL ENGINE KIT】49cc 4 stroke pull start petrol conversion kit for adult bicycles, ideal for bikes with 26 inch frames and similar Long term spares available as required..
  • ★【MAIN PARAMETER 1】Engine Model:142F.
  • Engine Type:Air-cooled, 4-Stroke, OHV, single cylinder.
  • Bore x Stroke:41.8 x 36 mm (1.65 x 1.42 in).
  • Net Horse Power Output: 1.6kW (2.1HP) at 7,000 rpm.
  • Net Torque:2.7 Nm (2.0 lbs ft) at 4,500 rpm.
  • PTO Shaft Rotation Counterclockwise (from PTO shaft side)..
  • ★【MORE STABLE & HIGH SPEED】4 stroke engines are more stable, more reliable and quieter than the 2 stroke rivals. The top speed of between 27 - 32 MPH / or 43 - 51 KPHThe tank holds 2 litres of petrol and everything comes with the kit..
  • ★【MAIN PARAMETER 2】Ignition System:Transistorized magneto ignition.
  • Governor System:Centrifugal Mechanical.
  • Oil Capacity:0.25l (0.26 US qt, 0.22 Imp qt).
  • Fuel Tank Capacity (liter):0.77l (0.81 US qt).
  • Package size: 53cm x 29cm x 29cm (20.9'' x 11.4'' x 11.4'').
Check Stock

DYRABREST 4-Stroke Diesel Engine Single Cylinder Vertical Diesel Motor Air Cooling Horizontal Gas Engine 196CC

  • ★【Advancement】In the design process, the structure data is analyzed through advanced software, and the design is continuously optimized to ensure the reliability of the diesel engine in terms of structure and work..
  • ★【Compact Structure】Compact structure, small size, light weight. Compared with gasoline engines, it is more economical and reliable..
  • ★【Large-capacity Fuel Tank】3L reinforced and thickened alloy fuel tank, using special painting process, thorough seam welding. Fast heat dissipation, low oil temperature, light weight..
  • ★【Energy Saving】Optimize the fuel system and the intake and exhaust system, and adopt the self-injection fuel system, the fuel is further atomized, the combustion is more thorough, the fuel consumption is low, the fuel injection is more punctual, and the service life is long..
  • ★【Good Heat Dissipation】Excellent structural design, fast heat dissipation of the fuselage, low oil temperature, light weight. Through advanced software analysis and optimization design, the engine structure and cooling curve are guaranteed..
Check Stock

JIFETOR Fuel Injection Pump Pressure Test Gauge Set, Automotive Gas Gasoline Fuel Oil Injector Tester Tool Kit 0-140PSI, with Schrader Adapters Universal Compatible with Ford Auto Car Truck Motorcycle

  • FUEL PRESSURE GAUGE TESTER: Automotive fuel injector tester tests if the fuel supply & injection system work normally, help to judge if there are broken internal components or faulty oil lines. Specific tool for fuel system detecting and troubleshooting. Fuel pressure gauge kit suits a variety of gasoline engines on car, truck, SUV, Motorcycle, ATV, RV, etc (Bosch, CIS Jetronic, Throttle Body System on GM vehicles excluded), not for diesel high pressure injection pump or direct-injection engine.
  • UPGRADED FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 5-1/2"L hose for small Schrader valve (compatible with some Ford), and 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee can splice in-line between the fuel pump and engine for most vehicles.
  • 140PSI/10BAR PRECISION-MACHINED FUEL PUMP TESTER GAUGE: You just need to ensure there is an adapter in the kit suitable for your test port or the inline connection is workable for your car. Pressure gauge adopts rubber cover protected 3-1/2" large dial and dual color cod....
Check Stock

DLE Engines 30-C28#3 DLE30 Electronic Ignition

  • 【PROFESSIONAL DIESEL ENGINE】4-stroke Air- Cooled Diesel Engine.Through advanced software analysis and optimization design, the reliability of....
  • 【DIESEL ENGINE SPECIFICATIONS】Model:186F Туре:Single-cylinder, vertical, 4-stroke air- cooled diesel engine Combustion system:Direct....
  • 【DIESEL ENGINE PARAMETER】Oil System: Pressure and Splash Engine Cooling Type: Forced Air Cooling.
  • 【SHAFT PARAMETER 】 Shaft Type: Keyed - Straight Shaft Diameter: 1" Diameter, 1/4" Keyway Shaft Length: 72.2mm (2-5/6" Length) Shaft I.D. Thread....
  • 【WIDE APPLICATION】It is widely used in small agricultural machinery, such as micro-tiller, pastoral management machine, irrigation and drainage....
Check Stock

4 Stroke 6.5HP Outboard Motor Boat Engine w/Tank, 123CC Heavy Duty Outboard Motor Fishing Boat Engine Water Cooling System CDI Ignition (4-Stroke 6.5HP)

  • ①4 STROKE 6.5HP OUTBOARD MOTOR ENGINE:The 6.5 hp 4-stroke provides all the power you need for motoring in a small craft. This engine does that as well as providing fuel efficiency second to none and a newly redesigned carrying handle and holding grip make it convenient to transport!.
  • Packing size: 114x64x41cm/44.8''x25''x16''.
  • Recommended Lubricant: Four Stroke Lubricating oil.
  • Overall LxWxH(cm): 78.3x34.3x103.9/30.8''x13.5''x40.9''.
  • ④ABOUT THE SPEED:The machine itself is lightweight, it can use on boat weight ....
Check Stock

Anbull 7.5 HP 223cc Recoil Start Gas Engine Horizontal Shaft 3/4' x 2.43' Go Kart Gas Engine for Log Splitter Single Cylinder 4-Stroke Gas Engine Forced by Cooling OHV Motor EPA Approved

  • 【7.5HP High Performance Motor】Anbull 4 Stroke 7.5hp gas engine has a Max Output Power/Speed of: 5.5kW/4000RPM & Torque of 12.5Nm. Shaft Size: 3/4" Diameter, 3/16" Length. Keyway 5/16”-24 UNF. Compression Ratio of: 8.5:1. Bore x Stroke of: 70mm x 58mm. Valve Clearance (Cold) Intake: 0.05-0.10mm & Exhaust: 0.05-0.10mm..
  • 【Low Oil Sensor】The low oil shutoff functionality turns the engine off to prevent serious damage or failure when the gas engine at low oil level. Similarly, if the oil level is lower than required level when starting, it will not start..
  • 【Built-in Forced Air Cooling System】Transistorized Pointless (TCI) Ignition System, recoil start system and built-in forced-air cooling system keep the motor cool and delivers high reliability and durability operation..
  • 【Industrial Grade OHV Motor】Industrial grade OHV motor is equipped with higher combustion efficiency and allows your machine to run at higher speed..
  • 【EPA approved】 The horizontal shaft is mounted in the crankcase with dual ball-bearings, making this gas engine an ideal replacement for most standard engine configurations. The powerful gas engine features a durable cast iron cylinder making it the perfect replacement engine for a go-kart, log-splitter and dozens of other....
Check Stock

BILT HARD Gas Engine 79cc, Gas Motor for Go Kart, Mini Bike, Log Splitter, EPA & CARB Certified, 4 Stroke OHV Horizontal Shaft with Recoil Start

  • Wide Application: HILT HARD 4-stroke engine is an easy-to-install solution for small engine needs. Great for residential or commercial lawn and garden equipment applications, weed eaters, tillers, cultivators, back pack blowers, trimmers, agricultural equipment, construction/industrial equipment, and a great array of applications to include..
  • Super Durable: This tough gas engine features a durable cast iron cylinder that withstands wear and abuse, fuel shut off for safe transport and gas saving overhead valves for a cooler, cleaner performance.(engine oil is not include).
  • Excellent Performance: 4-stroke engine delivers powerful, quiet, cleaner performance with low vibration which reduces work fatigue, making it ideal for small equipment applications and as a replacement for the standard 2-stroke high emission engines used in these applications..
  • Industrial Grade Made: All BILT HARD engines are industrial grade and feature cast-iron sleeves, automotive grade rods, pistons, rings, crankshafts, valve and valve springs. 3,600 RPM engine speed, splash-lubrication system provides efficiency. Easy-reach recoil starter system with auto-decompression..
  • Noted: Every item will be Oil Tested before packaging, so it may look used or touch a little oily, but 100% new ....
Check Stock

Ski-Doo Can-Am Sea-Doo XPS 2-Stroke Full Synthetic Oil Quart, 779126

  • Specifically engineered with BRP to guarantee optimum protection for E-TEC engines..
  • Uses a highly effective package to keep engine parts lubricated, clean and free of wear.
  • This low smoke, low odor formula also allows for maximum engine performance.
  • Can be used in direct, semi-direct fuel injection system and high performance carburated 2-stroke engines.
  • Officially recommended for the unique needs of Rotax engine.
Check Stock

2 Stroke 12HP Outboard Motor Boat Fishing Engine,Boat Motor with Water Cooling System Inflatable Fishing Boat Engine 169CC,4500-5500 r/min

  • ...ers】Displacement: 169CC,Gear ratio: 2.08(27:13) Cylinder: 2,Max.speed(r/min): 4500-5500,Gear Positions: F-N-R Packing size: 120x70.5x37.5cm,Ignition System: CDI,Cooling System: Water-cooling,Control System: Tiller control,Starting System: Manual start,Control System: #93 gasoline,N.W./G.W.(kgs): 27/31 Bore x Stroke(mm): 50x43.
  • 【High Efficiecy】Recommended Propeller range: 3 -9"1/4''x8",Recommended Lubricant: 2 Stroke Lubricating oil,Mixing ratio: Fuel:oil=50:1,Trim and tilt system: Manual Tilt,Overall LxWxH(cm): 78.3x33.2x104,Standard fuel tank capacity: 24L.Standard CDI ignition system for easy starting and improved performance, it can be partially tilted upwards to sail in shallow water, can work in most water depth conditions.Features 360 degree steering rotation for reverse without gear shifting..
  • 【Water Cooling System & Fuel-Efficient】Water cooling technology to improve the reliability of the whole machine.easy To wear parts are standard parts of gasoline engines, the advanced fuel saving technology make the gasoline consumption is efficient, burning Oil will not fall into the Water, which make the motor meet the Ameri....
Check Stock

kipa Oil Injection Conversion Fuel Pump kit for Johnson Evinrude Outboard VRO 5007420 No Vro

  • Top Quality KIPA Oil Injection Fuel Pump, Improve throttle response for better boat engine performance, Steady flow..
  • MPN: Brand new aftermarket replacement Oil Injection Fuel Pump Replace For Johnson Evinrude 5007420, 175109, 436203, 438094, 435560, 438400, 435953, 435556, 435558, 435784, 0175109, 5004558. NO Vro.
  • This pump kit Does NOT have the 4-wire warning system or services a "VRO style" fuel pump. No sensor plug included, It Fits for most Johnson/Evinrude outboards without VRO system thru 2006 classic style. Please do match the structure and the OE Part Number, make sure it's the same as your stock one..
  • Brand new aftermarket fuel pump and it works like a charm, besides it also contains fitness accessories as pictured which is the main source for the fuel pump function. Just swap out everything the same as the old pump out it in..
  • Each of them are tested again and again in the factory, Easy to install and go directly, Manual is not included, You may search lots video online, And they Will demonstrate How it will deserve.
Check Stock