Best Structural Hemlock Rivets

DYNAMIC SAUNAS Maxxus 3 Per Low EMF FAR Infrared Carbon Canadian Hemlock Sauna

  • This item will be delivered curbside. To have the item delivered to a location of choice on your property, kindly make additional arrangements with a third party provider ahead of delivery.
  • 7 Maxxus Low EMF FAR Infrared Carbon heating panels 3 on the rear wall 1 on each side wall 1 under the bench and 1 on the floor board.
  • Full 3 person capacity / Operates beyond 140F.
  • Natural Reforested Canadian Hemlock wood construction.
  • 6mm Interior and Exterior wood planks with a 1.13 inch inner frame.
Check Stock

DYNAMIC SAUNAS Maxxus 4 Per Low EMF FAR Infrared Carbon Canadian Hemlock Sauna

  • This item will be delivered curbside. To have the item delivered to a location of choice on your property, kindly make additional arrangements with a third party provider ahead of delivery.
  • 9 Maxxus Low EMF FAR Infrared Carbon heating panels 3 on the rear wall 1 on each side wall 2 under the bench and 2 on the floor board.
  • Full 4 person capacity / Operates beyond 140F.
  • Natural Reforested Canadian Hemlock wood construction.
  • 6mm Interior and Exterior wood planks with a 1.13 inch inner frame.
Check Stock

Maxxus Saunas Maxxus Gracia 1-2-Person Low EMF (Under 8MG) FAR Infrared Sauna, Curb Side Delivery

  • Delivery: This item will be delivered curbside only on a pallet by a freight carrier..
  • Wood: Natural reforested Canadian Hemlock wood construction.
  • Capacity: 1 person – Overall Dimensions: 39 W x 36 D x 75 H inches.
  • Temperature: operates up to 140F (Ideal between 118 to 135F).
  • Heater: 7 infrared carbon low EMF energy efficient heating panels (EMF between 6-10MG – 6 to 8 inches from the heating panels.).
Check Stock

Bememo 240 Set Leather Rivets Double Cap Rivet Tubular Metal Studs 2 Sizes with Punch Pliers and 3 Pieces Setting Tool Kit for Leather Craft Repairs Decoration 4 Colors

  • Double cap rivets kit: totally 240 sets double cap rivets in 4 colors, 1 x hand punch pliers, 3 x fixing tools, and 1 x 15-grid storage box, enough....
  • Assorted rivets: 4 color rivets are gold, silver, gunmetal and bronze.
  • 2 Sizes: large one size with the cap, post and base all are 8 mm (5/ 16 inch),....
  • Uploading tool: a hand punch pliers can easy make a hole on edge of the clothes, which can clip less than 15 mm width of the clothes.
  • Exclusive design base tool: there are groove on the base that can fix rivet and prevent rivet knocking bending and sliding, one side groove of the the....
  • Applications: both sides of rivets have a cap that make it looks good.
  • These leather rivets can be applied for DIY crafts or clothing such as shoes,....
Check Stock

POP Rivet 18-8 Stainless Steel - 8-8 1/4 x 1/2 Gap 0.376-0.500 Qty-25

  • Dome head rivets are mainly used in applications where there is no access to the rear (blind side) of the joint. Domed head rivets are the most common type of rivets..
  • one is called the rivet hat and mandrel. Both the hat and mandrel are pre-assembled and ready to use..
  • Dome head rivets are installed by using a riveting tool to draw the mandrel which causes the body to deform and clamp down on the joint..
  • Upon reaching the designed clamping force, the mandrel snaps and is discarded. The mandrel side of the rivet, once the mandrel is removed, will leave the domed head exposed..
  • Rivet size and grip range is measured in installed length..
Check Stock

POP Rivet 18-8 Stainless Steel - 8-12 1/4 x 3/4 Gap 0.626-0.750 Qty-25

  • Dome head rivets are mainly used in applications where there is no access to the rear (blind side) of the joint. Domed head rivets are the most common type of rivets..
  • one is called the rivet hat and mandrel. Both the hat and mandrel are pre-assembled and ready to use..
  • Dome head rivets are installed by using a riveting tool to draw the mandrel which causes the body to deform and clamp down on the joint..
  • Upon reaching the designed clamping force, the mandrel snaps and is discarded. The mandrel side of the rivet, once the mandrel is removed, will leave the domed head exposed..
  • Rivet size and grip range is measured in installed length..
Check Stock

POP Rivet 18-8 Stainless Steel - 3-2 3/32 x 1/8 Gap 0.032-0.125 Qty-250

  • Dome head rivets are mainly used in applications where there is no access to the rear (blind side) of the joint. Domed head rivets are the most common type of rivets..
  • one is called the rivet hat and mandrel. Both the hat and mandrel are pre-assembled and ready to use..
  • Dome head rivets are installed by using a riveting tool to draw the mandrel which causes the body to deform and clamp down on the joint..
  • Upon reaching the designed clamping force, the mandrel snaps and is discarded. The mandrel side of the rivet, once the mandrel is removed, will leave the domed head exposed..
  • Rivet size and grip range is measured in installed length..
Check Stock

POP Rivet 18-8 Stainless Steel - 8-6 1/4 x 3/8 Gap 0.251-0.375 Qty-25

  • Dome head rivets are mainly used in applications where there is no access to the rear (blind side) of the joint. Domed head rivets are the most common type of rivets..
  • one is called the rivet hat and mandrel. Both the hat and mandrel are pre-assembled and ready to use..
  • Dome head rivets are installed by using a riveting tool to draw the mandrel which causes the body to deform and clamp down on the joint..
  • Upon reaching the designed clamping force, the mandrel snaps and is discarded. The mandrel side of the rivet, once the mandrel is removed, will leave the domed head exposed..
  • Rivet size and grip range is measured in installed length..
Check Stock

Leather Rivets Kit 420 Sets Double Cap Brass Rivets Leather Studs with 3PCS Setting Tools for Leather Repair and Crafts, 4 Colors and 3 Sizes Jetmore

  • [Value 420 Sets Rivets]: The leather rivets set included 420 sets double cap brass rivets in 4 colors and 3 sizes,with 3pcs setting tools,great enough to meet your demand for different DIY crafts..
  • [High Quality Material]: The leather rivets are made of nickel free copper, anti-rust and durable,not easy to fade,strong and sturdy for leather crafts, leather straps or clothes..
  • [Multi-purpose]: These leather rivets are useful tools which can be applied for DIY leather crafts, repairing and decorating wristbands, hats, jeans, belts, shoes, sandals, jackets, bags,clothing and so on..
  • [Easy to Use]: The leather rivet kit comes with a setting tool. We have used pictures on the link to help you easily install and use..
  • [Useful Storage Box]: All the rivets and setting tools are tidily placed in a transparent storage box, you can easily find the size and color which you need..
Check Stock

Tubular ROLL Squeezer DIE for 3/16' Body Diameter Rivets, 3/8' Height.187 Shank Diameter.437 Shank Length

  • SOLID ALUMINUM RIVETS UP TO 1/8" IN DIAMETER..
  • TUBULAR MILD STEEL RIVETS UP TO 3/16" DIAMETER..
  • ADJUSTABLE TO FIT FROM 1/16" TO 1-3/4"IN LENGTH RIVETS, BY CHANGING DIE SIZE, (SOLD SEPERATELY)..
Check Stock