Best Structural Steel Bolt Kits

Muzata Cable Railing Post Corner Post Square Weldless Flat top 36\x2\x2\ Stainless Steel Brushed Pre-Drilled 1-Post Corner Solution Wood Concrete Top Mount Deck PS02 LC4S PT1 PT3 PT6

  • ...w the descriptions to get the matched corner bracket for this post. Corner applications - This 36’’ square cable railing post (brushed finish) is specially designed for corners, realizing a one-post corner solution. It is pre-drilled with 10 pairs of 90 degree holes to work on horizontal sections. It can act as structural corner post in level sections. Muzata invisible cable railing kit series is recommended to work with this post. Plz search Muzata CV2.
  • Weather protection - This cable railing post is made of quality T304 stainless steel with great rust resistance and will work for a long lifetime. It is ideal for both indoor and outdoor applications like deck, stair, porch, balcony, and fence. However, plz note that T304 is not recommended for projects within 10 miles of the seaside or saltwater. Need posts applicable in humid conditions, please search Muzata PM05 to find the aluminum cable railing posts.
  • Code Compliance - This structural square post is designed with 3" cable spacing. Generally, the span between two structural posts should not exceed 4 feet to pass the 4" sphere test. But it could be increased to 7 feet if you add a stabilizer post between them. Please search Muzata PS32 or PS12 to find slice or rectangular stabilizer posts to get....
Check Stock

HECASA 1/2\ New Quick Tach Mount Plate Attachment Skid Steer Loader Compatible with Kubota and Bobcat Skid Steers and Tractors

  • The Brand New 1/2" Quick Tach Loader Mount Plate can easily weld or bolt onto plows, forks, or any attachment that you want to convert to quick tach hookup. Please note this is unpainted..
  • Weight: 125 lb. Outside width: 46". Inside width: 45". Height: 18.5". Top bar:3/8" thick .Plate: 1/2" thick. Its convenient dimensions allow it to be installed and hooked up to the tractor effortlessly..
  • Made of Grade 50 structural steel which enables itself more durable and more corrosion resistant than standard steel. It has a longer lifespan..
  • Fits skid steers with the universal quick tach mounting system and tractors with the skid steer style quick tach..
  • All joints of the attachment mounting plate are solidly welded without safety concerns.Just let our plates share the load..
Check Stock

Muzata Cable Railing Post Level-drilled Post 36\x2\x2\ Stainless Steel Black Finish Pre-drilled Post Top Mount for Wood Concrete Level Deck Stairs PS01 BH4S, PT1 PT2 PT6

  • Key feature - This square cable railing post (black finish) is designed for 36" residential cable railing projects. It is pre-drilled with 10 pairs of level holes to work on horizontal sections and save your labor. It can act as both structural end post and middle post in level sections. This cable railing post comes with both flat and curved brackets to fit flat and round handrails. Muzata invisible cable railing kit series is recommended to work with this post. Plz search Muzata CV2.
  • Weather protection - This cable railing post is made of quality T304 stainless steel with great rust resistance and will work for a long lifetime. It is ideal for both indoor and outdoor applications like deck, stair, porch, balcony, and fence. However, plz note that T304 is not recommended for projects within 10 miles of the seaside or saltwater.
  • Code Compliance - This structural square post is designed with 3" cable spacing. Generally, the span between two structural posts should not exceed 4 feet to pass the 4" sphere test. But it could be increased to 7 feet if you add a stabilizer post between them. Please search Muzata PS32 or PS11 to find slice or rectangular stabilizer posts to get a broader view. It is important to consult local building offices about the rules ....
Check Stock

Muzata 4Pack Level drilled Cable Railing Post 36 x2 x2 Post Body 33 Adjustable Top Post Level Line Post Top Mount Stainless Steel Black Finish Wood Concrete Level Deck PS01 BH4S

  • ...will work for a long lifetime. It is ideal for both indoor and outdoor applications like deck, stair, porch, balcony, and fence. However, if your project is located near the seaside or humid areas, Muzata aluminum posts PD01/PD02/PW01 are highly recommended for its super strong salt tolerance.
  • Code compliance - This structural post is designed with 3" cable spacing. Generally, the span between two structural posts should not exceed 4 feet to pass the 4" sphere test. But it could be increased to 7 feet if you add an intermediate post between two structural posts. Search Muzata PS11 to get matched rectangular intermediate posts. Pls consult local building offices about the rules since there might be different requirements in some states.
  • Related Posts - You might need several post types to build a complete project: search PS01 BH4S for structural line posts, PS11 BH4S for intermediate posts, PS01 BC4S & PS01 B34S for corner posts, PS01 BA4S for stair posts. If you are unsure how to do the cable railing system, please reach us by clicking "by Muzata" below the golden button. We can provide FREE DESIGN SERVICE without extra charges.
  • BlackCool System - BlackCool cable railing system is pre-designed to help you get a fully customized cable railing project....
Check Stock

Case Club Precision Rifle Pre-Cut Waterproof Case with Accessory Box & Silica Gel to Help Prevent Gun Rust (Gen 2)

  • Waterproof wheeled case comes with pre-cut foam to hold almost any Precision Rifle up to 49.3" long. If you have a Ruger Precision Rifle with folding stock, please refer to our (smaller) Ruger Precision Rifle Case made specifically for that rifle. 26" barrel RPRs will not fit. Also holds pistol, magazines, included silica gel canister, included waterproof box, bolt if desired & various accessories..
  • Stainless steel added to padlock points for added security. Orange peel texture added to exterior finish to minimize scratches. Structural ribs added to outside of case for increased durability. Long front handle length to help counter balance off center weighted loads. Wide bodied snap latches that can be used with gloves..
  • Please refer to diagram image to make sure your rifle will fit. Fits scope (within a 3.70" height). Fits Palm Shelf. Fits bipod. Fits under barrel attachments. Fits bolt in or out of the gun. See image diagram for fitment guidance..
  • Foam insert is (closed cell) military grade polyethylene which can be wiped clean..
  • Case is Airline Approved for checked luggage, padlockable, wheeled, fully shippable & dustproof. Case is ATA approved and can be shipped..
Check Stock

Pactrade Marine Boat Kayak Canoe PVC Outrigger Arms Stabilizer System Fishing

  • ...el mounting hardware is included with the outriggers/stabilizer kit, as shown in the listing’s picture. The stabilizer kit consists of 2 durable PVC float kits in red and off-white color, 2 aluminum arms/poles (together with lock nuts), and 2 Side/Deck Mounts that are made of durable, high impact fiber-reinforced structural quality PP (Polypropylene)..
  • Measurement of: PVC Float Kits – 27-1/2” (L) x 5” (W).
  • Aluminum Arms/Poles – 31-1/2” (L), 1-3/16” Diameter.
  • Side/Deck Mounts Screw Holes Distance — 3-1/4” (L) x 1-1/4” (W). Net Weight of the set: 5lb..
  • The large, easy-gripping lock nuts offer simple adjustment on the outriggers. It has a red button as quick release lock to lock and unlock the outriggers and stabilizers in order to secure the position. Simply press the red button to detach..
  • This outrigger/stabilizer system has an ONE (1) Year Limited Product Warranty. Disclaimer: This listing sells only the outrigger/stabilizer system and the kayak displayed is only for reference and is not for sale. Item Number: PE401001..
Check Stock

Glide Gear 1X Dual Offset Fishing Rod Spreader Outrigger Boat Trolling Holder

  • ...el mounting hardware is included with the outriggers/stabilizer kit, as shown in the listing’s picture. The stabilizer kit consists of 2 durable PVC float kits in red and off-white color, 2 aluminum arms/poles (together with lock nuts), and 2 Side/Deck Mounts that are made of durable, high impact fiber-reinforced structural quality PP (Polypropylene)..
  • Measurement of: PVC Float Kits – 27-1/2” (L) x 5” (W).
  • Aluminum Arms/Poles – 31-1/2” (L), 1-3/16” Diameter.
  • Side/Deck Mounts Screw Holes Distance — 3-1/4” (L) x 1-1/4” (W). Net Weight of the set: 5lb..
  • The large, easy-gripping lock nuts offer simple adjustment on the outriggers. It has a red button as quick release lock to lock and unlock the outriggers and stabilizers in order to secure the position. Simply press the red button to detach..
  • This outrigger/stabilizer system has an ONE (1) Year Limited Product Warranty. Disclaimer: This listing sells only the outrigger/stabilizer system and the kayak displayed is only for reference and is not for sale. Item Number: PE401001..
Check Stock

KAX 2″ Front Leveling Kits Fit for F150 2009-2021, 2 inch Leveling Lift Kit for 2009-2021 F150 4WD/2WD, Front Struts Spacer LLK010

  • Feature: The leveling kits are heavy duty proprietary composite material. It features a heavy-duty proprietary composite construction that will never be rust. This Leveling kit is neither steel nor plastic..
  • Looks more aggressive : This leveling kit improves the look of your vehicle by lifting the front of your truck to even out the overall body of the vehicle. It can be helpful to go off road or to a snowplow or trailer..
  • Increases ground clearance: After installing our 2″ F150 leveling kit, your tires will no longer be rubbed. It allows you to fit larger custom rims and tires and you will get MORE Comfortable Riding Experience..
  • NOTE: The thickness of front lift kits is less than 2″, but the leveling kits will actually raise the truck by 2″..
  • 2 hours installation: The kit comes with everything needed for 100% simple bolt-on installation. The process requires no strut pre-loading, cutting, or modifying any factory parts. An alignment is needed after the installation..
Check Stock

vikofan 8 Pcs Workbench Bracket Kit Sturdy Steel Angle Brackets Multi-Angle Joint Fastener Shelf Fit for Desk Edge & Box & Wood Beam with Screws

  • The workbench bracket can help you work out of building your own work bench..
  • Material: The workbench bracket kit made of heavy duty 3/16 inch thick structural steel.Coated with green powder.(Point of improvement).
  • Design:The workbench brackets ensure that the legs and top will be parallel, plumb and square..
  • Package Included:8 Pcs Workbench Bracket(8 brackets to build a bench any length, width or height you want while assuring the bench will be square and plumb.),Screws and Instruction..
  • Easy to install:Add lumber or steel legs, and a wood or metal work surface, then bolt or weld it together.(Specific reference installation instructions).
Check Stock

8477 Piece Grade 5 COARSE ZINC Plated Bolt Assortment. Bolt, NUT, Washer and LOCKNUT. Comes with (2) 40 Hole Durham Bins. 1/4-3/4

  • What You Will Get: A variety of quantity to suit your needs, 197PCS heavy duty hex bolts +90PCS hex nut+90PCS flat washer+90PCS spring washer..
  • Heavy Duty: bolt kits are made of high quality materials carbon steel, with excellent anti-rust and corrosion resistance property, can be used in extreme environments..
  • 2 Kinds of Washers: washers designed to spread the load of screw fastening and prevent loosening in industrial, shop, automotive and home appliances.
  • Practical SAE Sizes: Use for fastening metal, wood and plastic materials together, includes sae sizes 1/4-20 x1/2" to 1-1/2", 5/16-18 x 3/4" to 2", 3/8-16 x 3/4" to 2".
  • Handy Kit: VIGRUE Bolt kit are stored in a transparent box organizer, convenient for your storage and use, handy for your daily reaching and putting away..
  • 2 Kinds of Washers Highly Compatible with Screws: washers designed to spread the load of screw fastening and prevent loosening in industrial, shop, automotive and home appliancesl.
  • nuts and bolts are the same matching size with washers and features a solid bearing surface to prevent nut/bolt head from tearing through applicable material.
Check Stock